How To Open A Stack On Gun Safe Combination Lock?

Here in this article, I have given clear guidelines about how to open the gun safe combination lock. If you have forgotten the combination then you can follow the steps given below to easily unlock the safe.

How To Open?

Do this process slowly to avoid mistakes and then get an error to redo. Follow step by step with patience.

There are only three easy steps involved:

Step 1:

To open a gun-safe combination lock. One has to rotate the rotator in a clockwise direction (which means right side)and land in the first number. The first number is the first digit of the code. The needle must be accurate to the number. The rotation should be made thrice for the first digit.

Step 2:

The second step is to rotate the rotator towards the left side. It means counterclockwise (opposite direction)and lands towards the second digit. Here, the rotation should be made twice. The arrow must be accurate to the second digit.

Step 3:

The last step, here it should rotate only once in a proper manner where the needle has to be straight to the third digit.

Now, turn the handle towards a clockwise direction and pull near you. If the lock doesn’t open an error has occurred. So repeat the procedure gently with the instructions. If you get confused with it you will be having a chance of starting it from the first.

Material Required To Open

The thing is very simple but the most important one. The only thing you need is the combination code. You must remember the code to open the gun-safe combination lock. The main need is a needle (pin) when you forgot the code. I have given a clear explanation of how to crack the lock settings.

The basic needs to open a safe gun combination lock when you forgot the code are

• Pin ( a needle )
• Patience

Here, the code can be anything like your favourite digits. But the only thing is that you should never share your pin with anyone. There is no setting like to set a strong password consisting of variables, numbers. For a combination code, you have to see it on both sides of your locker box.

When you buy a new gun safe combination lock the code is mostly 0-0-0. This is basically called factory code. You can reset the code by rotating the dials with your code accordingly. When there is a keypad pattern you can set them in the same way by pressing.

Crack Your 3 Digit lock

You can crack your 3 digit combination lock in just a few seconds.

• When you know only 2 digits and not the third digits. You must align the codes of the 2 digits and in the place of the third digit insert a pin. When all the codes are getting aligned, the inserted pin gets stuck to it.
• Inserting a pin helps you to crack the lock and also gives a good grip.
• Holding in your hands strongly must give a greater level of upward force.
• Continuously give force to it until the correct number occurs.
• When the correct number occurs a sound comes out.
• Cling sound.
• This pinning method is suitable to crack all the digits in your lock with the same procedure if needed.
• Do with patience.
•  Don’t get confused

Some people without knowing this technique, smash their safe combination lock to get their valuable things. Some get confused in remembering the code and do smashing.

What To Do With Old Combination?

The old safe combination is an antique safe combination. Old safe combinations are easy to open because they are made of steel and concrete. This can be opened just by entering the code. This is an old model and in the case when you forget your code it can be smashed against the wall to open. To make it easier, give a call to your near locksmith to open them with duplicate keys in small damage.

Step 1:

To enter a known combination. Spin the dial towards the left at least four times and the arrow should be landed on 0(top points). Remember not to spin it oppositely. So you have to start from the first.

Step 2:

Slowly turn your dial to left. Do it very gently if not your register won’t accept the combination.

Step 3:

The third step is to dial the second number twice in the right side direction. Do it twice. Be slow and legible.

Step 4:

The next step is to slowly turn to the right and don’t stop in the second combination.

Step 5:

Now make 1 full rotation over the dial and stop exactly on the second number.

Step 6:

Rotate to the left the last number.

Step 7:

Finally, keep spinning till you hear a cling sound and stop right there. Rotate the handle and pull it towards you to open. These steps are used to open an old safe combination.

How To Find Whether It Is An Old Or New Lock?

When you are residing near-lock manufacturing factory you can have a look and get an idea of it. To make it easier call a locksmith and clarify with him. They usually check and find with its serial number and the dialling structure of the gun safe combination lock.

Probably the difference between old and new safe combination can be found by yourself. But sometimes they fraud to sell things for a higher price. They give extra coating to the locker. One can find the best safe storage after researching on available options.

How to open a stack-on safe without combination?

If there is an override key, a locksmith can make it for you. If the safe is locked, a locksmith can obtain the original code from the manufacturer. Alternatively, you can have the safe professionally drilled by a locksmith so that it can be used again.

How to open a safe with 4 and 5 number combination?

To dial a combination, start the dial at 0 (zero). Turn the dial RIGHT, passing the first combination number FOUR (4) times before stopping and entering the number on the fifth time. Turn the dial LEFT, passing the second combination number TWO (2) times, and stopping at the number on the third time.

Final Talk

kept in a locker. Normal and middle-class people don’t have that many valuable things. This is a bitter truth. I think in this article your doubts have got cleared with my detailed explanation. Everything can be solved with smart work (tricks) along with patience.

In the future generation, each and every home has a separate locker. It has developed smart technologies like finger scanning and face unlock. Here, I am summing up everything so far stated in this article. It’s as easy as a combination lock to crack open an electronic gun safe