We all might have seen lockboxes in our lives. But we always struggle to open such boxes because we forget the combination of digits. Let’s be honest we usually forget the combination or password, and then sadly, we have to cut open the lockbox.
This is a guide for first-time users of the combination lockbox. We will provide you with steps to open a 3-digit combination lockbox.
Unlock A 3-Digit Combination Lock Box
There are just a few steps, and you will be good. All you need is a combination. And with that, let us start the article.
Methods To Crack A 3 Digit Combination LockBox:
Step 1: Identifying The Prospect Numbers
It is vital to look for the combination numbers when operating the lockbox. You need to look for the perfect numbers at which each disk gets stuck. With this process, you can even look for what is the exact combination number using this method.
All you need to do is look for the disk closest to the shackle. Now, suppose it is disk 1. So start moving disk 2, and look for the number at which disk 1 gets stuck. Repeat this process with disk 3 to look for disk 2.
Step 2: Lowering the number of trials
Now that we know the numbers that got stuck. We can easily find out the combination. But you have to be very careful when finding the numbers.
You may have 4 numbers, but out of them, you have to select only 2. This can be done by getting the intensity at which the ring gets stuck.
Step 3: Even fewer trials
This step can be tested only by the intensity of the disk getting stuck. You have to concentrate on the combinations and feel the disk. Do not worry if you are not able to sense it.
All you will have is 4 combinations to try. This will be ok as maybe you have a lot of trials, but you will end up with the correct one.
How To Open A 3-Digit Combination Lock Box Without Combination?
This topic will look at how to open a 3-digit lockbox without a combination. So let us see how.
Time required: 15-20 minutes | Materials required: NA
First, if you have bought your lock for the first time, you must enter the factory code first. Mostly it is 0 0 0. But if it isn’t, you can proceed with the manual and find it there.
Now, look for the locking lever; it will probably be at the bottom. Quickly move the lever from A to B. The lockbox will open.
Open A 3-Digit Combination Lock If You Forgot The Code Using Paper Clips
We will be opening our lock without the code. In this case, we will see how we can open a lock if we forget the code.
Materials required: paper clips
Time required: 5-10 minutes.
In this procedure, we just have to take 2 paper clips. One will be rotated, and the other will be the tension tool. After this, we will rotate the paper clip until it gets open. You will push them forward, and your lock will quickly open up.
All Combinations For A 3-Digit Lock 0-9:
There are probably 1000 possible codes. If we go statistically, we can see that we will have similar combinations.
000, 001, 002…………………………999.
So following this rule, we will have up to 100 combinations.
It is mentioned in the above part of the article as well. All you need to open a lockbox without the combination is 2 paper clips. Bend them accordingly, as advised, and start the process.
One should be the rotating thing, and the other should be the tension tool. We are sure, with the help of both these tools, you will be able to open the lockbox without the combination.
Open A Cash Box Without Combination:
The cash box also has a lock similar to the combination locks. So if you do not remember the combination of your cash box, do not worry.
You just have to follow the above steps mentioned in the earlier part of the article, and then you are good to go.
Take the two paper clips, and bend them accordingly. Use both clips to open the lock, and voila! Your lock is opened.
How To Set A 3-Digit Combination Lock On Luggage?
Most of these locks come with a factory set combination, which is 0 0 0. Now, open the lock and move it quarterly; this will allow you to change the combination.
After you change the combination, quickly check whether it is working or not. You will probably not have any issues after this.
How To Reset A 3-Digit Combination Lock Box VAULTZ?
The VAULTZ lockbox is very difficult to operate once you change the factory input of the combination that is 0 0 0 and change it to your desired combination.
That password is the only way to open that VAULTZ box. No other resetting can be done to open that box as it has this major security addition we have already seen.
The only way to open the box Is to change the lock. Yes, you cannot reset the lockbox, but you must remove the old one and install a new one in your box. Similarly, you can open your realter lock box too.
At last, we would like to sum up the article. firstly we discussed how one could reset the lock and open it up. After that, we mentioned how can we open the lock if we had forgotten the combination of the lock. The procedure for the cash box, VAULTZ, is also mentioned. You can go through that we you want to. We hope that this article will help you in gaining information. We request you go through every step before actually doing this activity.