Sometimes we forget to change the lock code that we have to enter on our lockbox. If you are unable to remember or change the lock code then don’t get panic in this situation. There are very simple steps and small requirements which will be available in each home that you need for this process. In this article, we will give you a brief idea of how to change the code on the lockbox.
Changing The Code On The Lockbox
Quick Navigation
The process is very simple. In a simple way, you just have to open the shutter present on the lockbox. Then enter your current combination or the combination given by the company itself.
After that, open the compartment of the lockbox by pressing the release button on the box. Enter the combination that you want on the lockbox by pushing the reset lever downward.
Release the lever after entering the code. Follow the detailed step given below if you don’t understand.
Step 1: Opening The Shutter
Step 2: Use Reset Lever
Step 3: Enter The Combination
Changing The Code For The Master Lockbox
- Open the lock by entering the previous combination, if it is a new master lockbox then enter the factory set combination which is 0000 or 9999 or 1234. You can find it in the product packaging.
- Shackle present on the lockbox must be open while resetting the combination.
- There is a hole at the side of the lock where you have to insert the reset tool. You can find the reset tool in the product packaging if not then users can also use a pen while changing the code.
- Push the reset tool into the hole and rotate it through 90 degrees in any direction. Take the precaution that the reset tool must stay in the same position when you change the code.
- Now enter the desired combination into the dial and write it down on the notepad.
- Before removing the reset tool, turn it 90 degrees in the opposite direction. Now the lock is set with the new combination. Turn the dials after the process.
- Keep the code-written paper in a safe place or your purse.
Details About Tools
1. Combination Code
You have to remember the code of the lock which you have set on the lockbox previously. Because without the old combination, the steps given above are of no use.
If you haven’t changed the code since you have purchased it, then the factory sets the typical combination which is always 0 0 0 0. If you have forgotten your current combination then contacting the manufacturer will not be of use to retrieve the code.
Then the only option that you have is to break the lock and open the thing. And this process requires more effort and the thing will also get torn out.
The best way is to write down the combination on your phone or in the notepad where you can save it.
2. Pen
It is recommended that when you set your new combination, set the number is very easy to remember. If not possible then after entering the combination write it down on paper with a pen. Use a fountain pen for writing the code, if you are noting the important information in your diary.
3. Notepad
It is recommended that you must write the code on the notepad because you can easily find the code if you forget it. Notepad is small enough that you can keep it easily in your purse or pocket.
So that you don’t have to carry big paper for small code. Use good quality note pad else the paper will get torn out due to the ink of the pen. The paper must be thick enough.
Easy Or Difficult To Change The Code?
If you follow the steps mentioned at the start of the article then it is easy to change the code. If you forget the code then it will get a difficult task for changing the code. The easy way out is to open it without the code if you’re in a hurry.
You can mail the manufacturer for retrieving the code. This process requires some documentation and necessary forms which you have to mail.
You will receive the code in several weeks. If not then the last option in these cases is to break the lock and open it. In case, where you don’t remember the factory set combination or it is not 0000 then you can contact the manufacturer of the lockbox. They will help you with the factory combination.
FAQ
1. Do you need the permission of the owner for changing the code: YES or NO? –
If you have the consent of the owner then you can change the code of the lockbox. But if you fail to do so and you tried to change the code then it will be an act of criminal case in which you can get into jail. So please don’t try to do this act or you get into trouble.
2. Only professionals only able to reset the code or anyone can do it by himself?
Don’t get panic while changing the code or you will forget the code. You just have to read the article carefully and follow the instructions step by step and you will be able to change the code by yourself.
Final Talk
You can also reset the master lock box as the steps are mentioned above. So don’t get confused while changing the code. You can also help your friends for changing the code by yourself or you can also share this article with them so they can also easily change their codes without any confusion. After changing the code, make sure that you test your new combination twice on the lockbox. If it doesn’t work then you have to contact the manufacturer about the problem.
Leave a Reply