How To Remove Window Rain Guards?

Window rain guards are used to protect the windows from external damage, dust or fog. This article will help you to remove window rain guards in simple ways and make your cleaning task easier. We will also discuss the benefits of using them.

How To Remove Window Rain Guards?

Removing these guards is no rocket science. It can be done by anybody with just the right instructions. Things you use in your daily routine are just enough for the same. Follow the article below for the proper guidance on window rain guard removal.

• 1. Cut A Section Of Fishing Line. Get a fishing line and tie it around both of your hands.  The length depends upon your convenience of holding it. It should be sharp enough to detach the tape or the glue.
• 2. Work Back And Forth In A Sawing Motion. Now, put it between the car’s surface and the rain guard. Pull it like a saw, back and forth. Keep doing the same until the guard comes off. Let’s see how to add one:
• 3. Peel Any Large Portions. Add Step ImageOnce the guard is out, you can remove the remaining with your hands. You can also use alcohol for removing the leftovers.
• 4. Install New Rain Guards. Once you get a clean surface, rub it off with a cloth to make it completely dry. Now you can attach a new guard with tape or glue.

Other Methods To Remove Rain Guard

Removing the window rain guard is pretty easy. It can be done with any additional help and there are multiple ways of doing it.

Heat Gun

Heat Guns are extremely helpful and easy to use for removing rain guards. In the absence of a heat gun, blow dryers can also be used.

Check out how it is done:

Step 1: Put on gloves just to make sure you don’t burn your hands.

Step 2: Start the gun to heat up to 75 degrees Celsius

Step 3: Run over the glued area of the guard

Step 4: Check if the guard is ready to come out by pulling it a little

Step 5: If it is coming out smoothly and pull it off with your hands.

Step 6: Clean the surface after removing all the glue/tape.

Floss

Dental floss can be very effective in taking out the rain guard. It can be easily found in your bathroom so no need to rush to the market.

Here are the steps:

Step 1: Get a clean, unused dental floss

Step 2: Hold it from both your hands tight enough not to lose the grip.

Step 3: Place it between the rain guard and the car’s surface.

Step 4: Use it like a saw moving back and forth

Step 5: Keep doing the same till the guard comes off

Step 6: After you are done, remove the remaining to get a clean surface.

Adhesive Remover

If the rain guard is attached with glue then use an adhesive remover. An adhesive remover can take off the guard very smoothly.

Follow the steps below:

Step 1: Put on gloves to avoid your hands getting sticky.

Step 2: Get the adhesive remover and put it over the glue holding the guard.

Step 3: Start with a smaller portion and not all at once.

Step 4: Check if the guard is coming off by pulling it with your hands.

Step 5: If it works and keep repeating the steps until the whole structure is out.

Step 6: Finally, you can clean the surface with a dry piece of cloth

Alcohol

In some cases, alcohol can also work as a solution. It depends on how strong the material is that is holding the rain guard.

You can try it following the steps mentioned below:

Step 1: Get a bottle of alcohol that is a little strong.

Step 2: Pour it over the glue holding the guard.

Step 3: Check out for a smaller portion if it is working.

Step 4: If it does, then pull it off slowly till you are done.

Step 5: Once the guard is out, use the alcohol to remove the leftovers.

Step 6: Clean the surface well.

What Are Window Rain Guards?

Window rain guards, visors, wind or window deflectors are automobile accessories. These are used to protect the window of your four-wheelers from rain, sunlight, wind, and more. You can easily attach as well as remove them on your own. It does not require any heavy tools.

Just remove the double-sided tape from its surface and paste it over the window. There is one more type that comes without the tape. This one requires no tool at all. You just need to insert it in the space above the window. Rain Guards give an extra edge of security to your vehicle’s window.

Apart from that, it adds up to your decoration and aesthetics. Getting window guards is optional but it is always good to have hands-on safety. They don’t even cost much and can be inserted without any expert’s help. You just need to place it right and insert/stick it well.

How To Choose The Right Rain Guard For Your Vehicle?

Picking up the right set of rain guards will depend upon the model, its colour, and overall structure. Besides that, your purpose for getting one also matters. If you want to have one for so safety of your vehicle, then you’ll go for the quality check. If you just want to put on some accessories for aesthetics, then quality might not even matter.

Why Rain Guards Are Popular Nowadays?

The popularity of the rain guards is because of the multiple benefits it offers. They are affordable as well as replicable. Apart from that one can remove as well as install them as and when they want.

Advantages Of Having Window Rain Guards

These are various benefits of having window rain guards. Below is the list of some of those advantages :

1. Rain Protection

As it is clear enough by its name, rain guards protect your vehicle from rain. If you have installed a rain guard, the raindrops would come inside the car even if the window is open. The protects the seats and the other parts as well, getting wet.

2. Covers Sunlight

It prevents the riders from the direct sunlight reaching out to them. In this way, it works as a sun guard as well.

3. Snow Protection

A rain guard protects your vehicle from snow getting inside. It works in the same way it does for the raindrops. So, you can keep your vehicle dry from inside.

4. Ventilation

For cross ventilation purposes as well, we can use rain guards. If the passenger is feeling suffocated, he can pull down the window to get some air. This way, just the right amount of air passes in and not a fast breeze.

5. Wind Control

Air is necessary but not heavy wind. At a high speed and you happen to pull down the window, you’ll encounter a heavy flow of noisy wind. To avoid that, rain guards or wind visors are used.

6. Aesthetics

Some people do use rain guards for remodelling the car’s exterior. So, for decoration and redesigning purposes as well, rain guards can be used.

Disadvantages Of Having Window Rain Guards

Not many but there are a few drawbacks of having rain guards for your vehicle.

A. Breakage

Rain guards have a short life span. Unless you have brought one of the supreme quality products, it is not going to last for long. If the guard gets hit by something, for example, a ball it might break. Though you can replace that one easily, it might not match with the rest always.

B. Uneven Installation

If you miss out on inserting the rain guard, it will all go into vain. The glue or the adhesive used is very strong and once attached to the guard, it gets stuck. So, you have to have your perfect shot.

Final Talk

It’s always good to learn something new, no matter how small it is. If that knowledge is related to your belonging, it’s the best. Now you don’t have to reach out to a mechanic for removing the rain guard. You can do it anytime on your own with the help of household things. You can apply or remove the rain guard of your vehicle or can help someone with it.