How To Open A Lockbox Without Code?

If you forget your lockbox code then don’t be worried as we have some simple solutions that can help you to open a lockbox without code. In case it is your lockbox where you keep our important papers you will be in great trouble. So you have to be very mindful while setting the combination code of your lockbox. You can take your valuable belongings from the locker efficiently.

What Is A Lockbox?

You can use a lockbox for the security purpose of your belongings. There are lockboxes you can open with keys. There are also lockboxes you can open with combination code. The latter option is safer than the former one. The risk factor with these combination lockboxes is the forgetful mind. If you forget the combination code you can lock yourself out of your house.

A lockbox provides security almost similar to a safe. But the difference between these two things is their security level. A lockbox is a metal box that uses steel weaker than 12 gauge steel. A safe falls into the high-security products category. While a lockbox falls into the low-security product category.

How To Open A Lockbox Without Code

You can also open a lockbox without a combination code.

1. Pick the lock

• Step 1: For lever locks or locks with pin tumblers, you have to turn two safety pins. You have to keep trying to pick the lock yourself. Then unbend the first paperclip into a pick by straightening it out completely.
• Step 2: After that, you need to open up another clip into an L shape.
• Step 3: In the 3rd step, you need to enter the L-shaped clip into the downward of the keyhole. Push the clip in.
• Step 4: You need to enter the first and straighten the clip into the top of the keyhole.
• Step 5: Now you need to pull out the straightened clip. Use a little pressure to the end of the straightened clip. The lock will open if the combination of pressure that is used is right.

2. Using A Nail File

You can also open a lockbox by using a nail file and you don’t even need a combination code for that. The process is quite similar to the paper clip technique. You just need to push the pointed end of the nail file into the keyhole. Then shake the file round in the keyhole and press the pin. It will sound like ‘click’ which means the lockbox has opened.

3. With An Earth Magnet

Lockboxes used in electronic safes can be opened by using a strong earth magnet or Neodymium Magnet. Place this magnet inside of a sock. Attach the sock to the upper left corner of the lockbox. You need to move it slowly until you find the solenoid. Once the magnet comes to the concretion of the solenoid the safe will unlock.

4. Decoding

If you want to open a lockbox without a combination code you can use the process of decoding. This process can be used for the lockboxes with wheel combination locks.

• Step 1: You have to draw the lock by opening the box a little.
• Step 2: Then you need to move all the wheels and one number at one time.
• Step 3: You need to feel how much the wheel can rock on a given number. The most played number is the part of the combination.
• Step 4: Finally, the lock will open If all the numbers are in sequence.

What Are The Other Methods To Open :

A lockbox is the safest way to keep your belongings secure. When it comes to using a lockbox with combination code there is nothing better than it. Just a 3 digit or 4 digit combination can safeguard your everything. But what if you forgot the combination code of your lockbox?

What If You Stuck Inside And Didn’t Remember The Code?

It must be your worst dream to forget your lockbox combination. It may be your door lockbox combination or your vault lockbox combination. You have to think about ways to get rid of such situations.

Here we can tell you some solutions to this problem.

A. Hire A Locksmith

You can find a locksmith who is efficient. An efficient locksmith can force the lock open. Then you can reset your combination. The manufacturer of your lockbox can also provide you with an efficient locksmith.

You need to be sure that the company from which you are hiring a locksmith is well known and trustworthy. You can also ask the locksmith for his identity proof. You need to be very careful about the security of your lockbox.

B. Contact Manufacturer

• Step 1: You can contact the manufacturer of your lockbox. They can assist you if you lose your combination.
• Step 2: You need to print out the necessary forms for your lost combination.
• Step 3: If your lockbox has a serial number then the manufacturer will send you the combination for the lock.
• Step 4: You then fill up an authorization form by a Notary Public that proves that the lock belongs to you.
• Step 5: Then you just take a photocopy of the serial number shown on the lockbox.
• Step 6: Finally, you just need to send the necessary forms and documents to the manufacturer through Email or any other way. After mailing the necessary details you should get your lockbox combination code within a few weeks.

B. Fill Out The Lost Combination Form

From the Master Lock’s website, you can find the lost combination form. You need to fill out everything that is necessary. For this process you need to have a serial number as the Master lock company doesn’t provide combination codes to non serialized people. Then you need to wait for four to six weeks for the factory reset combination.

C. Bypassing

You need to insert a tool, thinner and longer than the key through the keyway. Do it until you can feel the back of the lock. It will help you to unlock the lockbox.

You can also use a factory reset bypass. Some lockboxes which have standard reset codes can work by this process. You need to read the manual of your lockbox and you will definitely find the reset code process.
Some lockboxes have pre-cut holes by which you can make them bolt to the ground. You can get a tool into the gap and flip them to the reset switch.

D. Shimming

This process can be used in the case of a lockbox that uses a padlock. This process is done by inserting two thin metal pieces into the gap between the lock body and the shackle. You need to press down to trigger the unlock mechanism.

You just need to make an arrow shape. You can use a pair of scissors as a shim. You need to insert the point into the nook between the shackle and the body of the lock. Then you need to move the shims which are inside the keyhole area. Finally, you have to press it down.

You need to remember that a padlock with a key or a padlock using a combination can be vincible while using shimming. There are also padlocks you cannot open by using the process of shimming.

E. Drilling

You can open the keyed locked cylinders by drilling. You need to use some lubricant as a preparation for this process. Spray the lubricant around the keyhole of the lockbox. Then just drill the lockbox by using a fresh drill machine. Using a fresh dill for this process gives you the best result. You need to drill light wider in comparison to your keyhole diameter at the initial stage. In this process, the lock can be destroyed.

F. Prying

The easiest method you can use to unlock your lockbox if you forgot your combination code is prying.

• Step 1: For this process, you just need a prybar or a crowbar as a tool.
• Step 2: In this process, there should be a solid construction and the spile between the door and the lockbox frame should have a flat end.
• Step 3: You just need to place a crowbar or pry bar between the door and frame of your lockbox.
• Step 4: Then you have to press down to force it open. Praying can be more troublesome in case you are not able to put the lockbox in a vice or you cannot stop moving it.

G. Cutting

If you forget the combination code of your lockbox the process of cutting is the easiest way you can apply. You can cut the lock mechanism by using this process. But the bad part of this process is the lock of the lockbox will be unusable after applying this process. An angle grinder is the most common tool that can be used in this process. You can also use a Dremel with a metal cutting blade.

H. Crack The Lock

The easiest thing about the master lock is that it uses notched rods as its mechanism. So that when you hold the open button the lock can open. It will happen if all the rods are in the correct line and they are pressed in the same order as well.

• Step 1: Now if you can’t open the lockbox with the open button you need to hold it and press on each of the keys to make sure which ones are under your finger. You should mentally mark the keys which move.
• Step 2: In the case of a four-digit Master key, you have to do the process several times.

I. Use A Flathead Screwdriver

It is a very easy way by which you can open your lockbox if you forget the combination code. You just need to enter the tip of a flathead screwdriver into the keyhole. Then turn the screwdriver

How To Set A Code?

To set a lockbox combination code you have to follow some steps.

• Step 1: When you get your lockbox the code should be set to ‘0’. You have to switch the ‘Clear’ button.
• Step 2: Inside the box, you will find a ‘recode’ tool after opening it. You can use this tool to set your password.
• Step 3: You have to turn the head portion of the recode tool and press the numbers which you want your password to be.

If you want to set a combination code for a lockbox with a knob you have to follow some other steps. You have to turn the number dials of the lockbox to the preset code ‘0000’. Then move the ‘upwards’ button. Next, you have to turn the number dials to your preferred number combination. Then you just need to move the ‘reset’ button back ‘downwards’.

After setting the combination code of your lockbox you have to turn the dials of your code. Then you just need to twist and pull the knob to open your cabinet or front door for everyday access.

How To Reset?

Lockboxes are specifically made to enhance security. If you are using a lockbox with a combination code you need to reset the combination code very often. It is because of the security purpose. In case you forgot the combination code of your lockbox you can also reset your lockbox combination code.

Here we are going to discuss some simple ways to reset your lock box combination.

• Step 1: You can start by opening the shutter door. You can get entrance to the combination dials.
• Step 2: You need to revolve the dials to the present combination.
• Step 3: You have to press down the ‘release’ button and pull the compartment door open as well.
• Step 4: Then push the ‘reset’ lever to the left and then push it downward. You must keep the lever in that position until your combination is changed.
• Step 5: Revolve the dial of combination and set your desired secret passcode.
• Step 6: Then push the reset lever up and back to its original position.
• Step 7: Finally, you need to close the door of the lockbox.

Final Talk

In this article, we were trying to give you some different ways that you can help in your need. Remember that you should not open others’ lockboxes without their permission. Most importantly you need to be very mindful while setting the combination code of your lockbox. Your success in opening a lockbox without a combination code depends on the tools you are using. It also depends on the mechanism of the lockboxes you are using. You have to remember that the ways like bypassing, shimming, picking, and decoding can destroy your lockbox.