The most annoying thing about a robot vacuum cleaner is it’s stuck. Even the best robot vacuum with smart features. Still, there are chances that your cleaner can get stuck while doing the most mundane things. After the device is stuck, it must be removed by a person. The machine will not come out without any external assistance. Here is a guide to keeping robot vacuums from getting stuck under furniture.
How To Stop A Robot Vacuum From Going Under The Couch?
Quick Navigation
During cleaning in-room or drawing-room. The robot vacuum often gets stuck under the couch. This happens only when you have a low heightened couch at your home. The robot vacuum cleaner mostly does not go under a high-height couch. If the furniture is High heightened. Then robot vacuum will easily pass beneath them. But still, not every house has high heightened furniture.
A simple hack that can be used in this case. That you can use pool noodles to raise the height of your couch, you can also use it for other low-height furniture. You do not have to spend a lot of money.
1. Use Pool Noodles
How to use: Cut the section of pool noodles required. Attached is it with your couch. Ensure after attaching pool noodles. The space beneath the couch is enough.
Using furniture risers- Pool Noodles can be used as the furniture risers. You can attach furniture risers on the leg of the couch. That will ultimately create a lot of space.
Either one is using pool noodles or furniture risers. Both can be purchased from the market. And you can find furniture risers of different heights.
2. Use 3M Command Hooks
You can use 3M command hooks to prevent the Roomba from going under the couch. Attach the 3M hook on the front side of your device. You can also install it on the other sides of Robot Vaccum. Ensure that the hook is pointing backward. It has a strong release response.
How To Stop A Robot Vacuum From Going Under The Bed?
There are two most common ways to prevent your Roomba from going under the bed:
A. Install Bumper Extenders
Installation of the bumper extenders on the robot vacuum is easy. The hack is useful and the Roomba will not be stuck anymore. These have to be fixed on the robot vacuum top side. The extenders can be fixed on the robot vacuum Bumper. It does not allow a robot vacuum to go beneath the bed.
B. Utilize Furniture Riser
You can use a furniture riser to increase the height. Which will not cause any problem. Even if the robot vacuum goes inside the bed. It will come out easily and not going to stick beneath the bed. Select the furniture riser wisely. As the height of the bed is enough after installing the furniture riser.
How To Stop A Robot Vacuum From Getting Stuck Under The Dining Table?
The dining table area is the most common where a robot vacuum can stuck. It’s frustrating when the robot vacuum keeps roaming near the dining area. It happens, as Robot Vaccum gets confused. And sometimes it faces problems to navigate. And it collides with the legs of the chair or dining table. The Robot Vaccum will also not clean that area properly. As it will keep trying to move out of that area. moreover rumours don’t clean carpets, so you can use a good carpet cleaner to clean such areas.
1) Lift chairs up on the dining table
The easiest and most effective way is to remove the chairs. This will create more areas around the dining table. Ultimately, then it will be easier for a robot vacuum to clean the area. Due to confusion only, the robot vacuum doesn’t do dusting properly. And it stays at the same place and gets stuck. It may take your little time. But this will save the Roomba from colliding with chairs or table legs. Either you can keep all the chairs aside somewhere else. Or you can just keep it directly at the dining table.
Why Does Robot Vaccum Get Stuck Under Furniture?
It is best to identify the obstacles in the robot vacuum cleaning area. The sensors in the robot vacuum help them to function smoothly. This sensor also helps the device not to collide with objects. Inactivated sensors cause the most typical problem in Roomba.
A few common reasons are:
- Cable or cords on the floor and walls of the house
- Clothes on the floor
- Low height furniture or sofas
- Toys
- Shaggy rugs
- Carpet with thick fibres can also be an obstacle
Some other issues which may be possible are:
- Sometimes, the robot vacuum gets stuck. As it is not able to locate the charging point.
- Keep the bottom area like the brushes of Robot Vaccum clean and tidy.
- Otherwise, the dust particles at the bristles can cause problems.
- The Roomba may not do the cleaning properly. It may not function at all.
- Ensure the robot vacuum main room base is in the right spot.
- The robot vacuum Homebase is just not only responsible for charging but Homebase also helps the robot cleaner to navigate in the house.
- Your robot vacuum can only work smoothly in optimal conditions.
- Your house should be properly lighted while using a robot vacuum.
What Can I Use To Block A Robot Vacuum?
It will be helpful for the robot vacuum to clean if you create barriers and blockage areas around your home. These places in your houses where robot vacuum will not go. The steps and process of blocking areas through robots depend on the device. You can read the details from the guide regarding blocking.
The steps can be different. As well, it depends on how smart your robot vacuum is. Many smart robot vacuum has a smart sensor. Through these robots, the vacuum can draw a map of the house, through the app or download link mentioned in the guide. You can select the areas you want to block.
You can also use physical barriers or large obstacles. Small virtual boundaries can be used to prevent robot vacuum. These are some ways you can use. As the Robot Vaccum will not work in a restricted area.
Mention Robot Vacuum Bumper Extender
a. Dual Model Virtual Wall Barrier for iRobot Roomba:
The product is available on Amazon. This project product will give a better control system. Dual Model Virtual will keep the Roomba from getting stuck under furniture. It is suitable for Roomba E/I/S and 800/900 Series. Keep the robot vacuum away from unwanted locations. Power support of 2*AAA battery.
b. PIAOLGYI 2PCS Bumper Extender:
The package has two packets of Roomba vacuum extenders. The cost of the PIAOLGYI Bumper Extender on Amazon is $16.99. The price can change. It helps Roomba not get stuck. The material utilized is high-strength polyethylene.
c. SplashNcolor Bumper Extender:
It can be installed easily. With SplashNcolor Bumper Extender you can have fully automative cleaning. Super glue is not included in the kit.
Do Robot Vacuums Go Under Furniture?
Yes, the robot vacuum tries to clean every area. It also goes under the sofa, couch, or furniture. And tries to come out after vacuuming. Most of the time it does not get stuck. But, to avoid such situations. To keep the robot vacuum from being tangled up around the furniture. One can use simple hacks like:
- Using furniture raiser
- Buying High heightened furniture
- Using pool noodles
- Using command hooks
Points to keep in mind while setting up robot vacuum in your home:
- Remove the obstacles to make your house suitable. No obstacles should come in the path of Robot Vaccum.
- No cables, toys, or clothes should come in the robot vacuum path.
- Switching on the lights, as Robot Vaccum cannot work in less or dark light.
- The robot vacuum dock or home base must be placed in a suitable location.
- Homebase is the center point. The robot vacuum should get enough area for movement.
- Enough space near the home base is necessary. Do not keep the home base nearby stairs or at the corners.
- At least 1.53 feet of space must be on both sides of the home base.
- To allow robot vacuum to function smoothly. You can reset the device.
- Ensure that there is no water in the path of Robot Vaccum. After coming in contact with water. It may cause damage.
- The repairing charges after damage are costly.
Final Talk
If your robot vacuum keeps stuck under furniture. Then you must remove obstacles. You can use the hacks mentioned above in this article. Robot vacuum uses many cameras or sensors. Through this sensor only it detects objects sometimes, it may fail. In that condition, you will have to find out the reason. After finding out the issue, you can remove the object causing the obstacle. Or the best way is to use a furniture raiser for better cleaning under furniture without any problem.
Leave a Reply