You find electrical appliances connected to cables and switches in every home. Smart Home System needs proper wiring set up in your home. If you are going to shift to a new house and want a smart home setup, then you should get the wiring done beforehand.
You may need to make a few changes and renovate the walls of your old home to make it ready for the new wires and cables that your home automation system would need.
There are advanced, fast, and reliable wiring systems present today that would support your Home Automation properly. The existing wiring of your home may not be very suitable for the home automation devices and you need to upgrade your wiring to get any home automation device installed at home.
We have mentioned some famous wiring systems suitable for your smart home followed by some important points to keep in mind while buying any cable wires.
List Of Wiring System For A Smart home
Quick Navigation
1. Neutral Wires
They are modern wires which increase the speed of the devices. You can get these wires for your new home but changing the whole wiring system in your existing home can be a difficult task. But it is still worth the effort if you want to get neutral wires for your home automation. Most of the Smart Devices need these wires to work. Although some older protocols like UPB can work with the old wires, it still needs neutral wires for its efficient functioning and speed.
2. House Surge Protection
If you install Whole-House Surge Suppressor then you can easily protect the number of Insteon and X10 connected devices. It provides insurance that would protect your devices against any damage.
3. Deep Junction Box
Deep Junction Box can make the installation of the devices easy. If you have a lot of Home Automation Devices at your home, you can easily connect the wires to this box. It is also available in various sizes. What size you take depends on the number and types of smart devices you have. Big Junction Boxes provide space for your devices to work efficiently and make the installation easier.
4. Wiring Closets For Your Devices
These are the closets that should be centrally located. Provides patch panel and media servers to your device. Gives support to your Home Automation System and also provides it a place where you can control it from the center.
5. Ethernet Cables
You need a good cable connection for your smart devices. Ethernet cables are very efficient. The best type of Ethernet cables you can get for yourself is the Cat 6 Cables. It can support the strongest of the speed. It would not pose any disturbance even if you connect a lot of devices to it.
Apart from this, there are a few Home Automation Devices that do not require wiring at all and can run on batteries for example- automatic lock, smart appliances, etc.
Points To Keep In Mind Before Getting a Wiring System For Your Home Automation
There are a few points you should keep in mind before you get the wiring done for your home automation.
1. Make A Ground (basic) Plan
Before you decide what wiring you need for your home automation, it is very important to make a ground plan. Make a list of all the devices you have and what else you want to get for your Smart Home. Also, decide the right places where you want to keep your home automation devices. This way, it would be easier for you to decide which wiring you need for your home.
2. Check The Warranty Of The Wiring That You Are Getting
It is very important to install the right kind of wires for your home automation as its whole working depends on it. Call a professional to set up your wires and cables properly. It should be long-lasting with a warranty(at least 10 years ) so that you don’t have to change the whole system in short periods.
3. Mark All Your Devices Properly
You should keep a track of all the Home Automation Devices that you are installing in your home. Places where you keep them and the type of cables they need. See whether your device needs Ethernet or Coaxial cable. Some devices run on batteries. Make sure they are working properly and kept at a proper place. Keeping all this in mind would make it easier for you to install these devices and also guide the technician.
4. Proper Structuring Of Wires
Make sure that the wires are structured properly. There are two types of cables Ethernet and Coaxial that are connected to two different types of devices. Ethernet supports the Home Automation Devices while Coaxial is used for other electronics like TV. They both can run parallel to each other. Make sure that these cables don’t cause any disturbance in the speed of each other.
5. Make It Safe
Get the safe-coating done of the cables and other wires of your home automation devices. The wires can cause harm to you or your children.
Options Of Wiring System For Home Automation
No products found.
Final Talk
It is very important to be aware of the right cables and wires for your home automation system. You should know what kind of cables would be suitable for your smart devices. Make the right kind of choice and then you can enjoy your smart home without any worry.
Leave a Reply