Crimes around the country are increasing daily, which makes it important for everyone to get a good security system at home. Nowadays people while setting up their home use the advanced security system, but forgot to get it to install the system on their smart tv. But Don’t worry, you will find out how you can easily view security cameras on Smart Tv by this article. Follow the easy steps to get your queries resolved.
Method To Watch Security Cameras On Smart Tv
As I said earlier, having a security system is not only beneficial but is much needed for people, but this doesn’t end there, one must also view security constantly and this should be done on their tv, Thus with the help of the following steps, you can view security cameras on smart tv. This will hardly take 30 minutes, and you’ll only need Ethernet Cat 5/6 cables to get it done.
Step 1. Connect your CCTV cameras to the NVR
The first step would be to connect your CCTV with CAT-5, this will include both the photos and video images, which are known for their low voltage electricity and less watt power.
1. Use only NVR
2. Make sure the words are connected properly
3. Double-check it once done
Step 2. Connect the security camera NVR to the TV
Once you have connected the CCTV camera to the NVR, Now you will have to connect the NVR to the TV. NVR is the fastest way to get clear images on your screen. You have to make sure both ends are connected properly. Use the wire in a straight direction. Make sure, NVR is of good quality
Step 3. Turn on your NVR
After both ends are connected properly, now you are all ready to turn on your NVR, which is one of the most essential steps. Place your NVR in a good place where it cannot get damaged. Make sure that, USB flash drive, SD memory card, or other mass storage device are connected. Once done, now you can turn on your NVR.
Step 4. Turn on your smart TV
Afterward, check that your Smart Tv is fixed and all the wires are connected to the NVR, if so then:
1. Insert HDMI.
2. Plug the NVR with the USB on the back.
3. Now turn on your smart TV by using the remote.
Step 5: The live view will be displayed on the screen
After following all the due process, now you are ready for the ultimate live security experience on smart tv.
1. Just switch on tv.
2. Click on view security
3. Live images of your outdoor will reflect on your smart TV screen.
Watch Security Cameras On Samsung Smart Tv
To view the security camera on Samsung smart tv follow the steps:
- Insert HDMI.
- Plug the NVR with the USB on the back
- Now turn on your smart TV by using the remote.
- After following all the due process, now you are ready for the ultimate live security experience on smart tv.
Just switch on tv.
- Click on view security Live images of your outdoor will reflect on your smart t.v screen.
How Do I Connect My Wireless Camera To My Smart TV?
In case, you are using a wireless Camera, then follow the steps given below, to connect it to your smart tv. The first step would be to connect your CCTV with CAT-5, this will include both the photos and video images, which are known for their low voltage electricity and less watt power.
- Use only NVR
With the help of these simple steps, you can easily get your security camera connected to your smart tv, you will get to see any live images, and can ensure safety.
Leave a Reply