Grommets are plastic or metal rings on which we have to hang the flag poles. Hence, it is necessary to know the correct procedure to hang the flag in the right position. Here we have mentioned easy steps that will help you to hang a flag with grommets.
Methods To Mount A Flag With Grommets:
Quick Navigation
Along with the rules for hoisting, we need to use a Grommet. They are plastic loops that provide fastening support. They prevent the flags from tearing when hung from their poles acting like a cover for rough and sharp edges.
Before we hang the flag we need to prepare the flag:
- First, measure the height of the pole considering the length of the flag is two times as high as the number.
- After taking the measurement, cut out two pieces of fabric of any colour.
- Make one of the pieces twice as long and the other twice as wide.
- Try to overlap the width of the shorter piece over the longer one.
- Stitch it with a line of fabric glue down the middle of the overlap.
- Now, stitch these two pieces together along two adjacent long edges and a short one.
- Turn this whole thing right side out and fill it with stuffing.
- Now you have to stitch the final edge to close it up.
- Try a French seam resulting in a much neater finished product.
- As the pole is extended downward and with the shorter side of the flag fabric facing the ground, place it onto the bottom of the pole and mark where it hangs.
- Using a ruler, draw a line from one end to another on this mark.
- Use this line to cut two pieces of fabric at 45-degree angles that both intersect this line.
- Turn them right side out, stuff them with stuffing, pin them in place and sew around their edges to finish.
- At this point, we have a finished flag with grommet holes.
Now follow these steps to hang the flag with grommets:
Step 1: Find Location And Mount
The flag is not lead to any bit of tearing. It can violate the flag code. Your mounting location can be a pole, wall, or even ground.
Step 2: Hanging On Free Standing Pole
To keep the pole standing upright even in bad weather, get a ground sleeve to help stabilize it.
Step 3: Hanging A Flag on A Pole Connected To The Wall
It shows everyone how proud you are and you care enough about what goes on in this home to fly the colours. So, now come and see how to hang our flag on these places.
How To Hang On A Pole?
Here comes the simple steps to hang your flag on a pole:
- Make a note of the distance between the grommets.
- Make a tiny loop in the rope and pass it through the snap hook’s eye.
- Pull the loop taught by passing it over the snap hook’s head.
- Take the same distance from the snap hook as you did from the grommet.
- The second snap hook should be attached here.
- Connect the second snap hook to the rope in the same way that the first was connected.
- Attach the flag’s two grommets with the two snap hooks. Raise the flag by pulling on the rope.
How To Hang On A Wall?
Hanging a flag on your wall with grommets is pretty easy, no matter what size you’ve picked up. Hammer the hooks into the walls made of a strong material holding firmly on the wall. You can prefer a flag pole holder with a wall socket.
As a piece of advice doesn’t attempt to drill a hole into your wall. Most home-improvement stores carry drywall anchors, costing less than five dollars apiece.
The best way to hang a flag is with grommets. The question lies why?
- Well, they are much stronger and more permanent than nails.
- As they’re made with plastic, they can hold up to winds, rain, and snow.
- It won’t also damage the wall or ceiling.
Now, If you’re after an item to hammer into your wall, the best option is a small metal or plastic pin.
- Make your own by buying a tiny drill bit something less than eight-inch and a small screwdriver or wrench set.
- Simply drill through the small hole, punch out one of the pins and remove it from the ball end.
- The next time you take your flag down, place it on the wall, push up on it and take it off.
How To Hang A Flag With Two Grommets?
Let’s make our flag more strong!If you want to hang a flag with two grommets, the steps are really easy.
You need:
- Some string,
- A piece of paper that can fit inside the grommet, and
- An office ruler.
You’ll be able to create your flag in no time!
- Determine how long your flag should be. For bigger flags, for example, your string shouldn’t be shorter than about 18 inches.
- Fold the paper in half and place it into the grommet that is the same size as your flag. The folds must be secured but not tightly rolled to know the space required by each fold in the proper dimensions.
- Create a ring with your string, tying one end to an object at home. If you’re hanging this flag outside, confirm the ring can handle harsh weather.
- Now the time comes for folding! Fold at each mark until your string has reached its maximum length.
- After that, tie a bow and add on a second piece of string to secure the flag in place.
- Hang your flag with two grommets, and always remember to fly it proudly!
In the case of a rectangle or triangle-shaped flag, repeat the process. Remember, you can use more than two grommets to hang your banner; make sure the string can hold up the weight of your flag.
Final Talk
Hanging a flag and holding it high has always been a prestigious matter. We need to understand the importance and emotions involved while hanging a flag. It brings honour and pride. The dignity that keeps our head high. This, we need to save our honour. We need to understand its value and prevent its violation. Let’s learn the correct way of hoisting our pride.
Leave a Reply