You must have been irritated by the fact that every time your power goes off, you have to struggle for 1-2 hours. After struggling for so many years. Now, many people have installed emergency lighting in their homes. But what if the power goes off and your emergency light does not turn on.
This will give you quite a headache. Right?. So, to avoid such happenings in your lives. Here is an article to give you information about repairing your emergency lights. Make sure you read the entire article.
How To Fix An Emergency Light
1. Battery down
Most of the time it is seen that your emergency lighting is not working due to drainage of batteries. It is so important to first look at the problem and then look for the solution.
If you can relate to the former problem then you simply have to buy batteries from your nearby store. This is as simple as any battery removal.
Before removing, keep one thing in your mind. You have to shut off the power before doing anything with the emergency lights.
2. Wire check
Nest step you can do is to check the wires. If the wires are loose or if the wires are tangled up in an organized way.
Then you can do it yourself by untangling the wires from each other keeping in mind that safety is first. Next, keep in mind that if the wires are loose then you need to call an electrician. a professional person obviously has better knowledge than a layman.
3. Circuit board
Lastly, if the lights won’t work after doing the above two repair tips then you need to check the circuit board. The circuit board will have a lot of things in there.
Make sure you check all of them using a screwdriver. Check the bulb. It is very much possible that the bulb is having a loose connection with the wires. Not only the wires, check if the filament is broken or the ends aren’t loose.
How Do I Fix My Emergency Lighting?
To fix your emergency lighting first of all you have to check for the above tips that are mentioned. It has to be the batteries, wire check, and circuit board.
After completing the formal check if your light still doesn’t work. then you can follow these steps to fix your emergency lighting.
Materials required: screwdriver, emergency batteries, and small pair of tongs.
Time: it will require 30-40 minutes.
Step1: with the help of a screwdriver, loosen the screws properly. Open the light and take out the batteries.
Step 2: Check the motherboard, there you will see transistors, buttons, etc.
Step 3: Next step is to check the button through which you think the problem has arisen. Try to push every button with the help of tongs. If you think the main button has an issue try to repair that.
Step 4: After finding the right button. Join the wires supporting that button. Make sure the wires are not loose and you are doing it with clean hands.
Step 5: now, your work is done. Simply place back everything together. Try to light back your emergency lights again. This time it shall work easily.
Does Emergency Lighting Need To Be Serviced?
Yes, maintenance and service are important for everything. Not only for electric products but for every product servicing is so crucial.
To maintain your emergency lighting you need to follow these steps and you are good to go.
1) Check the voltage of the emergency light from time to time.
2) Emergency lights always have a backup of about 90 minutes. Make sure yours have one.
3) Always keep an emergency battery for your lights. It is as important as keeping an emergency light.
4) Keep cleaning the bulb with a damped cloth. First, clean it with a damp cloth then with a damped cloth. This is to avoid dust and dirt.
5) Lastly, we would suggest keeping an extra pair of bulbs with you to change the previous bulbs. this is because of any breakage in the filament or if the bulbs need to be exchanged with new ones.
At last, we would like to conclude the article. By stating that having an emergency light is very important. But, if your emergency lights are not in a good condition then that can really affect you in times of emergency. So, to protect you and keep you updated on this fact.
we have provided every possible information in this article. Firstly we talked about some tips and then we discussed steps to perform. Most of the tips are DIY so you can easily do them by yourself. Other than that we talked about servicing and maintenance of these lights. Do read this article properly.
Leave a Reply