To enhance the beauty of our house. We use LED lights to raise the bar of that beauty. Before you light up the LED strip you should know the correct method to connect multiple led strips to one power source. This guide can help you to resolve the issue in just few steps ahead.
Methods To Attach Multiple Led Strips To One Power Source
Well, to connect the multiple Led strips to one power source. You need Led strips light that are more effective than the traditional LEDs. And to connect the Multiple LEDs you can use the connector to connect those leds.
1. Using Clip-on Connectors to Connect LED Strips
When you figure out that, you have to connect the multiple LEDs. you must know about the end of those Led and there is a copper plate at the end of each of the led strips. SO with the help of the clip-on connectors, you can connect the Led strips. |by connecting the positive and negative of the strip.
You can find the positive sign on the strip that is denoted by (+) and the negative sign with the (-). And when you connect all the strips together. you can connect it with the main power source with the help of the Led splitter that too has several wires on its head. But the opposite to that will connect to the power adaptor and the to the power supply.
One of the easiest ways to connect the multiple LEDs with each other. There are different methods with which you can connect your Led strips with each other.
a). Hippo Buckle LEd strip connector
These connectors are one of the simple ones to install. these connectors consist of connecting space on each end of the connect. You need to connect two of the different strips on each side of the connector. And close the opening of the connector in order to connect the led strips.
b). Solder-free led strips connector
Although, the Hippo buckles are the best and the simple ones to execute. You can also go for the solder-free led strip connector. And the main benefit of the solder-free led strip connector is that. You can connect the led strip in a parallel combination. Unlike the other one in which you have connected the led strips in the series combination.
(c). Gapless pin connector
Each brand and style of LED strip light may use different pin quantities. Most are 4 pin connectors, but you may encounter 2 pins and 5 pins as well. Another note to pay attention to is the width size of the led strip. Most will be 3/8″ or 10mm but reference the brand’s specifications for the size of your strip lights.
It’s another option that you can go for if you are an expert or at least know how to solder wires.
While its an option that you can go for only if the stips are not connected with the connector.
All you need to do is that you have to cut the strip according to your need. And then remove the covering of the strip and then join the same wire with the other one and solder those wires.
How To Attach Multiple Strip Lights To One Remote?
You need to press the button on the receiver that will turn blue. And press the on/off button on the remote while directing the remote to the receiver. And it will start to get sync with each other. you can connect or sync the other receiver to the remote but all you need is the master receiver. Moreover, It is very common to attach your LED closet lights with a remote. Nowdays, people usually have remote-controlled patio string security lights at their houses.
And to create the master receiver you need to go. first receiver and again press the button and repeat the sync process again. press and hold the on/off button on the receiver. A flicker has been created on the master receiver. And that will control the whole synchronization. You can use a good remote controlled outlet to control different devices at home.
Methods To Attach Led Strip Lights To 12v Power Supply
With the help of the rechargeable power output source, you can connect the led strip to the 12v power supply. The DC port on the battery unit is a “female” one. And to connect it to the LED strip, the included male-to-male cable can be used. and select the battery output in order to connect the battery to the 12v power supply.
How Do You Wire Multiple Led Lights Together?
To connect multiple led lights together you need to follow some steps.
Step 1: Choose the kind of circuit you’ll use
The current in this circuit follows a single route. And the series continues to both ends of the LED strip splitter. Which is then plugged into the wall’s main electricity.
Step 2: Connecting the LED strips together
You have to decide the frame of these LEDs and after you’ve decided on a form. Connect the anode of the first strip to the cathode of the next until you’ve used up all the strips. From end to end, you now have a length of multiple strips connected together.
Step 3: Checking power needs
Make sure to check the power rating. The sum of the voltages required by each strip in the series includes the net amount of power required. Remember that though the same amount of current flows.
As a result, to prevent reducing the quality of the light output. Make sure the power output is sufficient to power all the strips. If the power outlet is too strong, your strips may be damaged.
Step 4: The LED strips’ placement
To make connections easier and prevent using too much cable. It is preferable to have a power source. As near as possible to the position of the strip.
Step 5: Checking the connections
Examine each node individually to check that everything is in order. You should also inspect each of your LED strips for visual flaws. Make sure the solder is hard and solid if you’ve done any soldering to guarantee a stable bond.
Step 6: Connecting to a power source
Now, that you have checked all the flaws and the LEDs are fault free. It’s time for you to connect the power to the power source to light up the LEDs lights. Make sure you install a durable motion sensor socket for your bulbs.
1. Can You Connect 4 Led Light Strips Together?
According to vetco.net, you can only add three strips together. And to connect more than three, you need an extra, power supply or wire.
So the answer to the above is no, you cannot connect four led strips together. Until or unless you are using a power gauge wire down the line.
2. Can You Wire Led Strips In Parallel?
Yes, you can connect the wire in the parallel combination. But the main disadvantage of the parallel over the series is that it will lead to a decrease in the power voltage through the wires. As the strips are directly connected to the power source other than each other.
The other thing to that is most of the wires only have a positive or negative output power. So in order to connect more led strips, you need to split those power outputs to connect to the multiple wires. And all you need is a bit more wiring than that of the series one.
3. How To Attach Two Sets Of Led Lights Together?
If both sets of led possess the same voltage then you can connect. Both of them very easily with the help of the connectors.
You have to check that they polarize with each other. And then connect the strip wire with the help of the soldering or the connector as mentioned before.
Although the led strips are an amazing product that can light up your house more. And if you are going to use these strips you need to know some details that seem to be important for you.
Whether sny query or any other thing. You need to get the information before stepping into something. That requires some wire work or maybe not.