The current scenario of today’s youth requires a 5g Smartphone and internet. But, they face a lot of problems witty internet connectivity.It is quite frustrating when your Xfinity Internet keeps disconnecting. This is because of several factors to which you should bring your attention. The article below will help you out by discussing all the possible factors along with their solutions.
Troubleshooting Xfinity Internet Keeps Disconnecting:
Given below are the steps that could help you to fix those issues.
1. Inspect The Cables
Often, the devices’ wires are torn or broken from some part due to normal wear and tear or the most heating climatic conditions such as Victoria in summer.
The wires tend to break down or are broken apart and prevent the reach of the wifi network properly to its end consumer. It causes multiple errors like xre 03121 to occur.
So checking or inspecting the cables and making the necessary changes can help you regain network connectivity.
Your wifi network may lag when the cable is set loose. Try checking them if they are intact or in an uncomfortable procedure. If you find them open, slightly twist them and inspect if the connectivity is restored.
If it gets restored, it is confirmed that there is some loose connection or cable issue. Also, to check for any wear and tear damage to the cable or if the insulation tape has come out. If there is much physical damage, try replacing the cable as early as possible.
2. Move The Router
Regarding the router’s safety, ensure it is mounted at a safe height and cannot reach small children’s hands. They might play with the wires connected to it and loosen it.
We often check every issue connected with the device, but we forget to check the router’s place. So try considering moving the router device to a place where it is out of reach of the child.
3. Clean Your Router
When it comes to taking care of any device or anything, cleaning and maintaining it is the most important task that one should follow.
Make sure you clean your router devices every weekend and ensure that there are no chances of dust getting piled up.
If dust gets accumulated or piled up somewhere, it may prevent the network’s connection to your house.
Check these possible areas :
- The porting ducts are designed to be left open, so there are high chances of dust getting piled up here.
- The network or signal bar at its base.
- At the plug of the wifi device.
4. Reduce Connected Devices
Having many devices connected to your router can sometimes overload the internet bandwidth and slow internet connectivity speed.
Try disconnecting some unnecessary devices which are currently not in use. The significant impact of this will be a boost in the speed of the wifi / Internet connectivity. And reduce the chances of disconnection.
5. Reset/Restart Your Router
If nothing from the above methods works for you, try restarting/resetting your device. Here are a few steps that could help you:
- Turn off the device.
- Remove the plug from your router and the modem.
- Plugging it back after a few seconds while waiting for the connection.
- Turn the machine back on and connect it to your home network.
6. Disable Security Software
You might notice that sometimes you install some security software on your laptop/computer device, which protects you from the harmful malware that might damage your device.
So to protect your device, it denies access to some wifi networks. While connecting before scanning might be detrimental. So to connect to every wifi network, switch off the security software.
Final Talk
So to end and conclude the above paragraph, we must say that, check your cable system, your router condition, and Any dust prevailing on it, one must limit the amount of consumer’s connectivity to it, and also disable the security system.
If then the conditions (or connection) aren’t back online, you can always contact your wifi router service provider.
Leave a Reply