Sanyo Tv is just another affordable brand and an accurate choice for all the average users. Sanyo Tv provides you with a basic flawless experience with Tv streaming.
The Sanyo tv works most of the time perfectly. But sometimes it wouldn’t turn on due to several reasons. There might not be enough power to turn on the Tv or there might be some software bugs.
Hardware issues or even a faulty display are the reasons why your Sanyo tv won’t turn on. Here is a whole guide to fixing Sanyo Tv won’t turn on.
Troubleshooting Sanyo Tv Won’t Turn On
If your Sanyo tv is not turning on then you need to fix it. The steps to fix your Sanyo tv are:
1. Unplug your tv.
This is the first step toward fixing the issue. You need to unplug your Sanyo tv from the wall. This is the most common technique used to fix the issue. Majority of the time it works.
2. Wait for 60 seconds.
After you have unplugged the tv you need to wait for a few seconds. You need to have some patience before plunging the socket back in. You need to wait at least a minute.
3. Hold the power button.
The next step is to keep holding the power button on the Sanyo tv. Keep holding the power button for 30 seconds. You need to ensure that you are pressing the power button on the Tv and not on the remote. This will help to reset the tv.
4. After 60 seconds plug in your Sanyo Tv.
After waiting for a minute you can plug in the Sanyo Tv back. Check whether it is working or not. In most cases, it starts working again so you can enjoy streaming on Sanyo tv.
But sometimes this technique would not work. So there are other methods to fix the Sanyo tv.
Other methods to turn on the Sanyo tv:
1. Check the wires or the cables.
The cables or the wires that are connected to your Sanyo tv need to be checked. Faulty cables are an issue If any broken or faulty cables are found then it needs to be replaced. It is also advisable to use normal cables instead of composite ones. It will solve all the problems.
Damaged cables need to be replaced with new ones. The set-top box you are using also needs to be checked. The HDMI wire connected to the box needs to be replaced if it is damaged.
2. Plug the cable directly.
The cable must be plugged directly into the outlet of the wall. If the Sanyo tv isn’t getting enough power then it won’t work.
If the Sanyo tv is connected to a surge protector then the tv won’t turn on. Even if many devices are connected to a single surge protector then too the Tv won’t turn on.
So you need to unplug the tv from the surge protector. You can then directly connect the tv to the wall outlet and check whether it is working or not.
3. Check if there are any power cuts or fluctuations.
Sometimes the tv is not getting enough voltage that is required by it. There might not be an issue in your Sanyo tv necessarily but the issue might be with the utility company.
You can try turning your main switch off and on again. Be careful as you are handling live wires. Then you can try and turn the tv on. Check whether it is working or not.
4. Power cycle.
Try and power cycle your tv. Any small issue or a software bug can be removed if you restart the device. To power cycle your Sanyo tv, you need to:
- The first step is to turn off your tv.
- The next step is to unplug your tv from your wall.
- Before plugging back the tv in, you need to wait for a few minutes.
- Then you can turn the Tv on and check if it is working or not.
5. Reset.
If the restarting does not work then you need to restart the tv. A factory reset is recommended. But it will remove all your saved settings. You should note it down somewhere so it would be easier after resetting.
Your Sanyo tv can be reset by:
- The first step is to remove the plug from the tv and wait for 10 minutes.
- Then, you need to press and keep holding the power button for 60 seconds.
- The next step is to plug the tv back in.
- On the Tv body, you will have to hold on to the menu and the volume up button.
- You need to keep holding these buttons and also press the power button once.
- The buttons need to be released after holding them for 5 seconds.
- Now, the reset process is completed and you can check if the tv is working or not.
6. Contacting Customer support.
If nothing of the above solutions works then you can contact the Sanyo support team. It will guide the customers to the best and give a permanent solution to fix the issue.
You can contact them either by emailing them or calling them. If the issue isn’t solved online then they will send a technician for help.
The professional can solve the issue easily and guide you perfectly. If they are helping you online then they will ask for the details of your product, warranty card, model no of the Tv, etc. So it is better that you keep all the documents handy so your issue can be fixed as soon as possible.
This article provides you with a complete guide on how you can fix your no-sound issue. Sanyo Tv offers very good quality audio, and video but sometimes such issues may occur. So, you should refer to the guide above and fix the issue.
One can even fix the issue by themselves without calling a professional. This will help and save a few dollars. Also, if nothing works then you may call a professional for help.
Leave a Reply