Will Ring Doorbell Work With An Old Chime?

Smart doorbells are the first option considered by every family when it comes to home security. But sometimes, these devices may not function properly or get damaged, so it is suggested that you either reset them or buy a new one. But do you need to purchase third-party devices along with the doorbell? Or Ring Doorbell Work with an Old Chime? In this guide, you will get your answer.

Can A Ring Doorbell Work With An Old Chime?

Your old chime can work with your Ring doorbell only when it is AC-powered, but if your chime is DC-powered, it will not work with your doorbell since it is not compatible with it.

Your chime should also have a wired connection that has 8 to 24 volts of power then only your Ring doorbell can work properly.

What Kind Of Old Chime do You Have? (AC or DC)

In addition, if you have a wired Ring Doorbell, for instance, Ring Video Doorbell Pro will connect with your home’s wiring grid and the current chime you have. So, it is necessary that your chime should be AC- powered.

It is good if you carry knowledge about your Ring Doorbell model and chime model because to run your doorbell with an old chime, you need to check if it is AC or DC-powered. If you don’t have any idea on how to figure out the same, read down below!

Observe these differences to know the power of your chime:

1. AC-powered doorbells:

Most doorbells are AC-powered and work with AC- powered chimes; some features of the AC-powered model are:

• Their wires are exposed, usually the individual wires. Since they don’t have a zinc coating.
• They do not connect with a single battery.
• They have a single cover, and 
• 230 volts to 240 volts is delivered anywhere.

Below we have written the description of the AC- powered model. Read further to get a better idea:

• Here, AC means alternating current, where the power moves back and forth.
• It keeps on changing its flow as per the needs of the device or how much amount of energy a device demands.
• Examples of AC-powered devices are electrical outlets in your house.

2. DC-powered doorbells

The feature of DC-powered are:

• Their wires are covered. Since they have a zinc coating.
• They have a double cover, and 
• 20 volts to 1100 volts is delivered anywhere.

Below we have written the description of the AC- powered model.

Read further to get a better idea:

• Here, the devices get the power supply directly from the battery.
• The power flow is steady if we talk about the speed.

After reading this, I hope you can figure out what your chime and doorbell are powered with.

How to connect your Ring doorbell with an old chime?

If you found out that your old chime is DC-powered, then there is no need to worry. You can get a Ring Chime pro. This device has many advantages; it allows you to:

• Choose a variety of different tunes or sounds.
• Alert with a real-time notification when someone rings the bell.
• Extend your WiFi signal up to 2000 square feet.
• Enjoy extra security with the nightlight feature in the doorbell.

Above was the solution to the problem if you don’t have an AC-powered chime. But how you are going to connect your new Ring doorbell with your old chime.

The steps are mentioned below:

1. Charge the doorbell-

The first thing you need to do is charge your Ring Doorbell. Charge it with the USB cable that comes along with the doorbell. A flash blue LED light will appear as you start charging the device.

2.Turn the power off-

Now, you need to turn off the main power by flipping the fuse off. This step is necessary for your safety, as you may get an electric shock while removing it when the power is on.

3.Remove the doorbell-

After turning the power off, carefully remove the existing doorbell. You will notice exposed wires.

4.Mark the place-

Here, you need to mark the wall where you have planned to install the doorbell. Keep the level small so that the mounting bracket is square. You can achieve this by measuring the top, middle, and bottom of the bracket.

5. Installation of brackets-

Now as you have taken the measurements, it is time to install them. Since the doorbell does not connect directly to the wall. But with the brackets, you need to install the brackets first, followed by your doorbell. Secure the mounting bracket with screws, and keep it tight;

6. Wiring-

Grab your doorbell and connect the wires with the exposed wires from the wall. The wire needs to be connected with the base plate of the doorbell. You will notice a screw where the wires need to get attached. Screw the wires firmly.

7. Attach the plate-

After you have successfully connected the wires with the base plate, attach the base plate to the frame. Hurrah! Now your doorbell is connected with your old chime, ring your doorbell to check the installation.

What if I Can’t Connect My Doorbell to My Old Chime?

As said earlier, if your old chime is DC-powered, then you can get a Ring Chime Pro, or else you don’t have any issues to worry about if your chime is AC-powered. Because in the majority of cases, new Ring Doorbell gets easily connected with the old chime.

But, if you are not able to connect your doorbell to your old chime, then you can call a professional to do it for you. A professional touch will make your task easier and reduce any damage that could happen.  

Another thing you can do is to move your chime pro to another outlet; sometimes this method works. As soon as you move your chime pro to another outlet, you will see a light pattern that will take 30 seconds to get into the setup mode.

FAQs

 Final Talk

The bottom line is that your new Ring Doorbell will only work with your old chime if it is AC-powered. Don’t worry if you don’t have one; we have discussed the solution above. In this article, we also mentioned the steps on how to install your new Ring Doorbell with your old chime. There is no harm in purchasing a Ring Pro Doorbell because it will benefit you with its advanced features. I hope this article helps you with your problem, till then keep reading!