White Rodgers Thermostat Not Blowing Cold Air: How To Fix

White Rodgers has been established as a reliable name. Still, it exhibits the nature of disruption in functioning. If you’re facing something similar, we got you covered. here are some ways to fix White Rodgers Thermostat Not Blowing Cold Air.

What Are The Causes?

• One of the reasons why your White Rodgers Thermostat is not blowing cold air might be due to a faulty wire or power cable.
• The thermostat is installed in a hot area.
• Batteries may be low or dead.
• Blockage in house vents
• Wrong cooling time.

Troubleshooting White Rodgers thermostat not blowing cold air?

Although this article has a couple of solutions for fixing the issue, you must take charge only when the trouble is minor.

It is appreciable to seek help from the technical support team when abnormal heat generation or sparks appearance is observed.

For now, you have to blindly check whether the settings are as per your desire because there are chances that it could have been subconsciously or temporarily set for some other purpose, and it would have slipped your mind.

1. Check for a Blown Fuse

In case of prolonged usage of the thermostat or improper voltage fed to the appliance, the chances of the fuse breaking increase sharply. Pull the fuse out and ensure it is not blown or broken.In any possible damage, please get a new fuse from the market and insert it back.

2. Check if the System is Set to Cool

The thermostat is used for heating as well as cooling purpose.If your complaint is about your HVAC not throwing cool air, then you have to check once if the thermal setting is set to Cold or Hot.

If it is set to hot, then switch it to cold.You can do this by reducing the temperature.

3. Inspect the Wiring for Fraying

Another apparent and possible reason could be the damaged or frayed wires attached to the HVAC system.

Firstly, cut off the system’s power supply and then examine the wire to ensure that the wires show no sign of fraying or getting worn out.

Also, check if the wire exhibit any insulation damage.Don’t do this alone at home; get professional help if you don’t seem experienced in messing with the wires.

4. Check the Power Supply

The loss of Power Supply due to any technical issue causes malfunctioning.There are chances of a defect in the power supply source due to insufficient or no power reaching the thermostat.

Also, the power supply may be temporarily hindered due to weather conditions or if enough voltage is unavailable from the source end.

5. Inspect the AC Filters

The primary function of the filter present in an Ac is to filter out the particulate matter from the air and throw out clean air.

The accumulation of fine or granular dust and dirt on the filter acts as the physical barrier in the air’s passage and reduces the HVAC system’s efficiency.

For this reason, the filters demand regular cleaning and even replacement after prolonged usage.

6. Check the Coolant Leaks

If you are wondering why your HVAC system is not working well even after checking all the causes mentioned above, try again, but this time by removing your earbuds.

If you hear a hissing sound or observe the evaporator coil of your HVAC getting frozen, this directs towards the fact that the coolant is getting leaked from somewhere.

This not only reduces the cooling efficiency of the HVAC but also exposure to this coolant may be toxic for any individual.

7. Check if the AC Coils are Dirty

AC Coils significantly help in the proper functioning of the HVAC system.The cleanliness of the coils is marked by the appearance of the shiny surface of the coil.

If the coil appears to be rusted, stained, or dull-colored, it is the notice for cleaning or replacing the coils.Professionals must deal with it, so contact them only and avoid doing this yourself.

8. Reset Your White Rogers Thermostat

If all the discussed methods fail to manage help, you are left with only a ‘Resetting the White Rodgers Thermostat.’

This is mainly done by performing a power cycle which is operated as described below:

• Uncover the Thermostat.
• There will be present R and C terminals.
• Get the wires off these terminals.
• Also, take out the batteries of the thermostat.
• After some time, reverse the process, i.e., insert the batteries into the thermostat again and attach the wires to the terminals.
• Now try to hear a clicking sound.
• Production of the clicking sound marks the completion of the resetting of the system.

9. Contact Support

If you are done with all the possible efforts, do the most needful and contact White Rodgers Customer Services. It will not cost you anything if the warranty period is over. There is no reason to worry even if the warranty period is over. The services try to be cost-effective, posing the least possible pressure on your pocket. Moreover, If you feel that there is not enough air to cover all the places you should opt for a multiple-zone thermostat to save energy.

FAQs

Final Talk

So now, when you are done reading the various troubleshooting techniques to be applied if your White Roger Thermostat is not blowing cold air, don’t lose your temper the next time you return from the office and your HVAC system refuses to comfort you. Instead, recall what you’ve learned from this article and fix the issue. You should get the best HVAC smart thermostat for your airbnb.