Ring Doorbell Not Charging? Easy Troubleshooting Guide

The Ring doorbell is one of the most valuable devices that I have come across in a very long time. It helps me make sure that my deliveries are safe and secure. Besides, I can monitor the happening in and around my property through my smartphone.

But one day, it failed to charge. I had no idea what was wrong with it. Though I left it in the charge for a few hours, it did not charge. This is when I decided that I needed to find out a way how to fix it. I found some causes and their solutions. Read this easy troubleshooting guide on why the Ring doorbell not charging.

How To Fix A Ring Doorbell Not Charging?

Before fixing the issues, one should go through all the steps below:

It will help you with detailed techniques and steps while fixing the battery or hardwired charging point.

Don’t forget to check your Ring Doorbell before getting your hands into fixing it, as it is crucial to understand the problem which is causing these issues.

Thus, read the steps given below thoroughly to fix your Doorbell:

1. Refresh the Ring App Battery Status.

Before getting into the fixing part, the user must ensure that the WiFi is working correctly. Make sure it has a robust connection.

It is necessary because the Doorbell cannot work without it. Thus, once you fix the WiFi, it will start working automatically.

Apart from checking the WiFi, one must refresh the Ring App Battery Status. Open your Ring App, to which your Ring Doorbell is connected.

Once open the Ring app, if the app shows that the battery status is low. Then, there is a strong possibility that your Ring still has a sufficient charge for days.

Just walk outside and ring your Doorbell twice or thrice to fix this. The status will change automatically, and you are ready to go.

It will refresh the status in the concerned app and prevent any activity or virus attached to your app.

2. Check Your WiFi Connection To See if it is Connected To Your Ring Doorbell.

As mentioned earlier, the user must ensure that their WiFi is working appropriately or has a strong connection before getting into any fixing part.

Once you fix the WiFi, the Ring Doorbell should start working automatically. 

Check your WiFi strength on your cell or television. If it shows that your signal strength is low or it is not connected, try disconnecting your WiFi and then connect it again.

Check whether the circuit is tripped or if it is the case, then fix it using duct tape, etc.

3. Check the USB Charging Cable For Your Doorbell Is Not Damaged.

Check your WiFi and ensure it works correctly or has a strong connection. If there is no problem with the status, then the problem is with the USB charging cable, which you might use to charge your Doorbell.

It Should be fixed within minutes. Follow the given steps:

• If your USB cable is not working, check it on other appliances.
• If it is not working or doesn’t show any charging on the other equipment.
• Then the only possibility is that your Cable is damaged.
• Just buy a new Cable.

4. Ensure That the Ring Charger is Working.

• Checking the USB cable is necessary.
• One must also check whether the Ring Charger is functioning correctly or not. 
• If your cable is not working, then check it on other appliances.
• If it is working on the other appliances, then the problem is with the Ring Charger.
• Get the New Ring Charger.

5. Check if a Circuit Breaker Has Tripped.

After the user has ensured that their WiFi is working correctly or has a strong connection:

• If the Ring Charger is working, there might be a problem with the circuit breaker.
• If you have a hard-wired ring, then there is no chance that your circuit breaker has tripped.
• If it still shows that the battery is not sufficiently charged, then the problem is with the circuit breaker.
• Just make sure that the circuit breaker is in good condition.

Check the Voltage From Your Doorbell Transformer:

• Just check the voltage temperature.
• If it is high, then change it to normal.
• And, if it is below average, then increase it.
• Ensure that the temperature is optimal.

Ring Doorbell Still Not Charging? Troubleshooting Tips:

Following are the steps to fix: 

• If your cable is not working, then check it on other appliances.
• If it still doesn’t work and the cable doesn’t show any charging on the other equipment.
• Then the only possibility is that your Cable is damaged.
• Just buy a new Cable.
• Or, check the USB cable. One must also check whether the Ring Charger is functioning correctly or not.
• If your cable is not working, then check it on other appliances.
• If it is working on the other appliances, then the problem is with the Ring Charger.
• Then, get the new Ring charger.
• If required, get professional help.

Fixing Not Charging in Cold weather:

Following are the steps to fix a Ring Doorbell Not Charging in Cold weather:

• One must start by checking the optimal temperature.
• Then, check the voltage temperature.
• If it is high, then change it to normal.
• And, if below average, then increase it.
• Ensure that the temperature is optimal.
• Then you can follow any of the above steps or precautions to see if it works.
• Users must ensure that their WiFi is working correctly or has a strong connection. It is necessary because the Doorbell cannot work without it.

Fixing Not Charging When plugged in:

Here you have to write the steps for the specific brand in detail. It should help readers to resolve/fix the issues:

• Try to write it in steps or bullet points that help to provide a clear solution.
• Try to research on Google and check YouTube videos to know the exact procedure to fix it.

Fix a Ring Doorbell Not Charging with flashing blue?

It might happen due to analyzing the charger to fix it:

• If your cable are not working, then check it on other appliances.
• If it is working on the other appliances, then the problem is with the Ring Charger.
• Get the new Ring charger.

How To Fix a Ring Doorbell Not Charging to 100?

• If your cable is not working, then check it on other appliances.
• If it is working on the other appliances, then the problem is with the Ring Charger.
• Get the New Ring charger with high capacity.
• If you have hard-wired Ring, then there is no chance that your circuit breaker has tripped.
• If it still shows that the battery is not sufficiently charged, then the problem is with the circuit breaker.
• Just make sure that the circuit breaker is in good condition.

How To Fix a Ring Doorbell Not Charging with USB?

• The user has to ensure that their WiFi is working properly.
• Check whether it has a strong connection.
• Then there is no problem with the status. 
• Check the USB charging cable which you might use to charge your doorbell.
• If your cable is not working, then check it on other appliances.
• If it still doesn’t work and the cable doesn’t show any charging on the other equipment.
• Then the only possibility is that your Cable is damaged.
• Just buy a new Cable.

FAQ

Final Talk

With the help of the following steps, one can quickly get their Ring Doorbell back to charging. But before fixing these issues, one should go through all the above steps and read them properly.