How To Make A Barrel Lock Key With Items In Your House?

If you want to make a barrel lock key with items in your house but getting confused about the process and material then we have perfect solutions for you. One can follow these steps to make the best lock key with minimal material.

What Is A Barrel Lock?

A barrel lock is a different type of lock system that is used by different utility companies. The utility companies use this lock system to protect their meter, cabinets, and other hardware. It has a unique operating mechanism. Its design is also remarkable.

There are many utility companies that believe that this lock system is very efficient. They give preference to this barrel lock system to secure their water meters, electronic enclosures, vending POS, industrial equipment, and Heating Ventilation and Air Conditioning (HVAC) systems.

The barrel lock system is almost similar in looks to tubular and cylinder locks. But it works in various ways. The only way you can open this lock system is by using its own identical key. This key is like a screw, round-shaped and it is unpickable.

This lock system is unique in terms of security. It is made of high-quality materials like Copper, chromate, or stainless steel. These factors make the lock system long-lasting.

How To Make?

Step 1: Choose The Right Screw

Add Step ImageYou need to choose the right screw to use as a barrel lock key. If the screw size is not appropriate then it will fail to the barrel cylinder wall. You can’t put pressure on the grip. You will not also be able to pull the screw out and make the ball to be loosened.

Step 2: Make It Smooth

You need to smooth the body of the screw. So that the screw will not scratch on the top of the lock.

Step 3: Insert The Screw

You have to put the screw to the bottom part of the keyhole. Do the process until you are sure that the screw fits the barrel cylinder hole.

Step 4: Avoid Damaging The Lock

You need to do the process gradually so that you can eliminate harming the actual form of the lock.

Step 5: Turn The Screw

Then you just need to turn the screw a few times with your finger when it is firmly attached to the keyhole. If you are doing the process for the first time then you need to pull out and then pull in the screw a few times. Basically, you have to make a combination between the screw and the cylinder wall by pulling out the screw and putting it in the back. So that it can give some pressure upon the lock.

Step 6: Pull The Screw Out

Finally, the ball bearing of the cylinder will be pushed up in a reflex manner to the locked position with the greater part of it. You need to apply sufficient force or else it will stumble out.

Do the process for sometimes until the barrel lock comes out. You need to remember that you should not twist the screw with a screwdriver because it can give extra force and the cylinder can break.

If you don’t have a screw in your house you can also use a pen, iron core, or something that is like a screwdriver in shape. Then you need to cut polythene or something like that which can be properly wrapped around the top of the tool. It will also work as a screw.

Working Of Keys

A barrel lock is designed to work in a very different way. These barrel locks have two types of keys. They are the plunger-type and screw-type keys. The key can gripe the barrel when entered into the keyhole. The key also releases the grip on the ball bearings. When the keys are turned the spring mechanism moves the catch. The barrel is taken aside for the lock to open.

Benefits

• The plated feature of this key has made it long-lasting.
• The components which have hardened the case are for corrosion resistance.
• You can easily open the barrel lock if you lose its key. An efficient locksmith can easily do the job.
• It is easy to install.
• It is long-lasting and flexible.

Usage

These types of keys can be used to protect utility field devices. It can be used in meters, electricity transformers, and enclosures. Thieves or unauthorized people who want to get an illegal entrance to the metering hardware of any utility company can face challenges with this barrel lock system.

How To Remove?

Here we are going to tell you how you can remove a barrel lock without using a key.

a. With A Paperclip

You need to unfold a paperclip and make it straight. Hook it at the end to another paperclip. You have to make sure that both the paper clips are bent into 90-degree angles. After that enter the bent end of the second paperclip into the lock. Finally, turn the entered paperclip in the direction the lock turns.

b. With A Screwdriver

You can use a small screwdriver. You need to push the screwdriver straight into the keyhole as far as you can. Now just twist the screwdriver until it grips the notch of the lock. Finally, the lock clicks to open. You can also use a very small butter knife.

c. With A Ball Pen

You can use a Ball pen to remove a barrel lock. You need to Pick a pen with the exterior in the same diameter or a little smaller than the barrel locks open point. Dispel the ink tube within the pen. You need to detach the back portion of the pen with scissors.

Cut four vertical notches into the back of the pen. Put in the pen as far as it can go into the lock. You may need to apply some pressure. Then you need to shake both the pen and the lock until the pins loosen. If you shake it a few times the lock should open.

d. By Drilling

Drilling is the last way to remove a lock. You will need a metal nail for this process. Place the nail under the keyhole and make two or three flips with a hammer.  Then set the drill in a slow manner. By using a firm pressure you need to start the drilling process. Remove the pins with a picklock. You need to continue the process until you can reach deeper.

Then get in a picklock or a screwdriver in the keyhole and twist it to open the lock. You should remember that if your barrel lock has anti-drilling pins you should not drill it. Such locks are designed like the way that the point you drill through the last pin will be locked permanently.

e. Get Professional Help

You can call a locksmith to remove your barrel lock key. An efficient locksmith can help you out with such a problem.

f. Using A Lock Pick

You can use a lock pick to remove your barrel lock without a key. First, you need to be sure that you have chosen a pick with the right number of needles in comparison to the number of pins on your lock. Use a tightening bolt on the side of the lock pick. After loosening the bolt line pick up with the lock. Make sure that the lock pins are aligned with the needles. After adjusting them you just need to tighten the bolt again.

How Do You Change A Barrel Lock On A Upvc Door?

A barrel lock on a uPVC door can be changed easily. There can be many reasons to change your uPVC door. If you lost your barrel lock key and you need to change the lock you can just call a locksmith to do the job for you.

If you want to do the job on your own then you first need to locate the lock barrel screws. Then you need to remove that screw. After removing the screw you will need the present key. Put the key into the barrel. Then revolve it to the right. The barrel should be pulled out easily after this process.

Take your new barrel and keys. Put the new keys into the barrel just as before it was done. Keep revolving the key until the barrel slots inaccurately. Then screw it with the barrel screw to back it into the right position.

Final Talk

In this article, we talk about barrel lock keys and how they work. We also tried to help to give some ways with which you can open a barrel lock without a key. You can also change the barrel lock of your uPVC door on your own with the help of our article.