How To Install Energizer Smart Video Doorbell Without Existing Doorbell

Energizer smart video doorbell is a new and innovative way for homeowners to take control of their homes. With this nifty device, users can remotely monitor the front door of their home from anywhere with just a click.

The good thing is that this device can be easily installed and set up without any wiring. And within a few minutes, you can start monitoring your home through the web applications available for iOS, Android, and Windows phone users.

Here’s a complete guide on how to install an energizer smart video doorbell without an existing Doorbell

Energizer Smart wifi. Video doorbell Installation Guide

Let’s see how you can install an energizer smart video doorbell without an existing doorbell by installing the plug-in module unit into the existing digital doorway.

Then follow the simple steps below to connect your Energizer Smart Video Doorbell and check it out on iOS and Android devices.

Tools and Materials:

1. Energizer Smart Video Doorbell.
2. Mini screwdriver.
3. Energizer Smart Video Doorbell mounting screws (4 pcs).
4. Thin wood or metal plate with holes the same size as mounting screws or use a bit of wire and make some tiny holes as a temporary fixing method.

The easiest way to install an energizer doorbell system is to install the round floodlights, the most inexpensive security system available today.

The next step is to install a home security monitor, which is also highly effective. The final step is to install an energizer smart video doorbell with no existing doorbell.

Here Are The Steps To Install Energizer Smart Video Doorbell Without Existing Doorbell

You may think you need a new, expensive doorbell to get an energizer smart video doorbell, but these steps will show you how to install one just by using your old ones. The hardware is relatively cheap (usually less than $25), and installing the device is easy.

1. This installation assumes your house already has power to the doorbell location (120V) and you have a location near to an available telephone wire for connection.
2. Locate the telephone wire in your home, typically in a basement or crawlspace near where it terminates at a wall jack. If it is not located there, start by checking any existing junction boxes on the exterior walls of your home that are close to where you want to install your Energizer Smart Video Doorbell.
3. There will be two insulated wires (usually red and green) inside the black sheathing of this cable with two thin copper wires braided around them; these side-by-side groupings are called “twisted pairs.”
4. If there are no junction boxes where you would like to install your smart doorbell, locate any un-terminated twisted pairs of either RG6 or RG59 coax cable and cut them off (you may want to keep them for the optional power supply installation below).
5. Connect your telephone wire to the two exposed wires of these cables using a crimping tool and miniature wire nuts (where applicable) by the following wiring color codes, the red wire connected to the green wire, the black connected to the white wire.
6. Test the telephone wire for proper operation by plugging in a telephone handset to the jack inside your home and then turning on the phone’s ringer. You should hear an audio tone produced through your Energizer Smart Video Doorbell speaker at that location.
7. Attach your Energizer Smart Video Doorbell to your desired doorbell space. The red light should be visible outside your home (not inside) during daylight hours (ideally mounted unobstructed on a wall in full sun).
8. Plug the Energizer into a nearby power outlet, connect it to your WiFi, and download the free app on your iPhone or Android device.
9. Follow the on-screen instructions to customize your home’s smart video doorbell, and tap “Next” at the bottom of the page. Under “Ring Chime,” set it to “On” if you want your doorbell chime to sound through your video doorbell speaker (recommended), or turn it “Off” if you want to hear it only through the phone app (optional).
10. Under “Motion Sensitivity,” choose “Low” to give your smart video doorbell the least amount of exposure to false motion alerts, and choose “High” if you want the highest sensitivity. Then tap “Next.”
11. Under the speaker settings, choose one that you find favorable from the choices of either “On” or “Off.” This sensitivity setting determines whether or not your Energizer Smart Video Doorbell speaker will play when you view a motion alert on your phone app. Leaving it will help you to give it a more real-life feel while turning it off allows users to hear alerts at a lower volume (optional).
12. Under Audio Volume, select a level that you find pleasant (recommended). If you have tested your chime and have it turned off, choose “Off” under “Motion Sensitivity” otherwise, turn it to “Low” or “High.” Tap “Next” at the bottom of the page.
13. Set your resolutions to match your cellphone device (recommended) under the video settings. If you are connecting through WiFi but in an area with a weak WiFi signal, choose a lower resolution setting to prevent slower frames when viewing motion alerts. Then tap “Next.”
14. Under Privacy Settings, use the four-way selector button on your phone’s touchscreen to navigate each option and select what is best for you (optional).
15. If you want to set your Energizer smart video doorbell’s speaker volume, choose “Adjust Volume” to go to the speaker settings and then adjust the level (“On” or “Off”) that you find most acceptable. Then tap “Next” on this page.
16. If you wish to set up a power supply for your Energizer Smart Video Doorbell to add an extra layer of security and sound an alarm when motion is detected, tap the box labeled Power Supply and select either Wired (recommended) or Wireless (optional). Read each description below carefully before selecting your choice; scroll down and tap Next when complete.
17. Tap “Done.” Your Energizer Smart Video Doorbell should be ready without your existing doorbell button.

How Do I Hook Up My Energizer Doorbell?

You’ve just spent a bundle on a new Energizer doorbell. You love the sleek design, the long-range, and the fact that it doesn’t require a landline.

But now you have no idea how to install it! Installing your doorbell is easier now as they come with WiFi connectivity.

All You Need Is Your WiFi Password, And You’re All Set To Go. There are two Energizer doorbell styles; one is the stand-alone WiFi doorbell that works with your existing doorbell wiring.

The other is a plug-and-play option that you can install in minutes using your existing bell wiring without messing up circuits.

There Are A Few Steps You Can Take To Get Your Doorbell Up And Running

1. First, check that your porch has an electrical outlet to plug the chime box.
2. It should be under the front window or on the exterior side of your house.
3. If it doesn’t, you may need to find an electrician to help you.
4. Once that’s done, plug it in at the outlet and test if everything is working as expected by pressing a button on your remote (you’ll also need a remote).
5. It may take a few minutes, but your doorbell should eventually chime and flash.
6. If it doesn’t, check the owner’s manual.
7. It’s also possible that you don’t have the right range extender to cover your house.
8. After this step, you’ll need to mount the model on the wall of your exterior porch (it can also be used indoors).
9. Start by unscrewing the two screws on either side that hold it together, then place them where you won’t lose them.
10. It’s possible to replace these, but you’ll need the same size as they’re not included in the package.
11. Once this is done, keep the model up and tighten the screw on the back that’s near your plug-in port.
12. This step can be tricky if you’re new to mounting things with screws, as it can easily fall off if you don’t have it aligned correctly. Start by going in at a 45-degree angle and hold it in place for a few seconds before tightening it up.
13. If you don’t have an exterior outlet, you’ll also need a drill to make the hole.
14. You should hire an electrician instead of trying to figure out how they did it.

Run The Power Cable From The Front Wall To The Install Location

The power wire has to be routed from the front wall to where your doorbell is located. You may start installing the mounting bracket after you have the power cord.

Drilling Instructions For Installing Energizer Doorbell

You have two alternatives based on how your door and entrance are constructed. For an angled perspective, use a flat mounting bracket or a mix of flat and wedge mounting brackets.

You may attach it around the cables once you’ve selected the best one.

The actions to take are as follows:

• With reference to the doorbell, mark the screw places on your wall.
• Use the supplied drill bit to make the holes in the wall (works for masonry or stucco installations).
  Incorporate the wall anchors.
• The doorbell may be mounted on the wall using long screws and a flat mounting bracket. To prevent water from entering and harming your device, screw the bracket down firmly.
• When using flat mounting brackets and a wedge, locate the ideal location using the wedge and then install it with screws. The flat bracket may be attached to the wedge bracket using short screws.

Use The Setup Guide In The Energizer App

After ensuring you have everything you need to install the doorbell, you must install and configure the Energizer Connect App. The Google Play Store and the Software Store provide the app at no charge.

Click to ‘Create Account’ option on the app after connecting your smartphone to your 2.4GHz WiFi network. The setup instructions will then appear on the screen.

Follow it. Then the app will remember your username and password after your first login; you can log in automatically.

Energizer Smart Video Doorbell Voltage Requirements

You may utilize all the Energizer doorbell features if installed correctly. Of course, seeing the live video on my Alexa gadget has been my favorite part.

However, if you use Google Home, you shouldn’t fear because the doorbell also works with Google Assistant.

When handling the wires on the doorbell, exercise caution. Before dealing with electrical wiring, be sure the power is off.

Additionally, be sure to call a professional if you experience any problems with the installation procedure.

FAQ

Final Talk

Using the above steps, I hope you can install Energizer Smart Video Doorbell without the existing doorbell. Do some proper research and go through the procedure before you start installing it.