How To Use a Genie Remote on a Liftmaster?

Genie Remote can be programmed to use on Liftmaster as they function on the same frequency as your Liftmaster garage door opener, but many people don’t know about this. If it’s the same for you, don’t worry. We’ve prepared a detailed guide on how to use a Genie Remote on the Liftmaster.

We also gave tips on how you can use a G3T model Genie Gate opener. We have covered some more instructions on the basic functions of the remote control too here.

Method To Program Genie Remote on Liftmaster Garage Door Opener

Genie and Liftmaster are now two of the most prominent names on your garage door. They are reputed in your garage door opener industry.

Both Liftmaster and Genie use buttons named “Learn” which are on the motor units overhead. It is used for programming remotes to the opening system of the garage door.

You may find it amusing but if you are having an extra Genie remote operating on a similar frequency to the Liftmaster you have then you can set them up together.

They can work as a garage-door openers, you are only required to program them. Then you can freely use both of them to regulate the automated garage door in six minutes or less.

Follow these steps below for using your Genie remote with your lift master:

Step 1: Long-press the big button on your Genie remote

You have to find the “learn” button. It is usually at the back panel of the device. It looks large. This may be on your overhead motor unit of the Liftmaster door opener of the garage.

Now you are required to hold that button. This will begin the programming function.

Step 2: Turn off the buttons when the major lights glow

The next step is to delete every code from the memory of the overhead motors unit. This will need you to reprogram formerly programmed garage- gate-opening remotes.

There are also indicator lights to give you signals here. You are required to press and wait while holding the button “Learn ” for about 6 seconds.

Check the pointer light just near the button when it turns off, know that you have to release the button.

Step 3: Indicating that the remote has been successfully programmed.

Now in this step, you need to press and then release the “Learn” button. Make sure it is the same button on the motor unit of your lift master opener.

By doing this the pointer light will be switched on glint for half a minute. This is actually to indicate that your unit is prepared to get programmed.

Here, Genie remote can help you. You can complete it by pressing and holding the big button on it. It will let it program it to the Liftmaster opener.

Remember to, let the button be turned off after the major lights upon your overhead unit glow. This indicates that your remote has been completely programmed.

How can you use a G3T Genie remote?

The G3T Genie gate opener is among the most common remotes. It has components of Genie Intellicode Technology that keep your garage safe. It keeps on changing the entry code after every time you utilize it.

This door opener is compatible with up to 3 Genie garage gate openers produced from 1997-present. The top 2 switches control the G3T remote control function with Genie door openers.

You can also set up your Genie G3T Remote control to the built-in vehicle control systems. For example car2u, or
To program the genie G3T door opener remote read the following instructions:

• To turn the programming mode on of the garage door opener you have to take the help of the program button.
• You need to long-press the button. Keep pressing the same until the spherical LED glows blue.
• After that, you can release the same.
• You will see that the tiny spherical LED light will turn off and the lengthy LED will start flickering purple.

NOTE: When it’s in programming mode, you will get nearly 30 seconds to conduct this step.

• Now, drag the defensive battery tag from the remote.

NOTE: When you program the remote buttons, keep a distance of about 1.5 meters from the opener. This assures you have favorable contact from your remote to the opener.

• Next, you need to press and leave the remote button of your own choice twice. The opener LEDs will glow once, denoting you have programmed your remote.
• Now again long Press and then release the button a third time. The door should open or close now. It is also possible to long-press the button too rapidly or lightly. If the LEDs don’t go OFF, you can press the remote button even more times to get the confirmation.

How to fix the missing or Stolen Remote/ how to remove all Remotes?

If you are stuck in a situation where you have lost your remotes while it has been still programmed. It is essential to understand how to remove all the useless remotes from the system.In this section, we bring you the same.

Follow the following simple steps for the same:

• First of all, you have to find and long-press the program button. Do this until you see a round LED turning blue after the release.
• Next, you need to long-press the Up(+) and Down (-) switches at the same time. Do this until both LEDs flicker blue and go OFF.
• Remove all of the remote control devices from other kinds of Genie garage gate openers. Long press the Learn Code switch until the LED stops blinking. Begin step 1 to reprogram the remotes.

NOTE: You need to clear the remote memory from the remote’s power head. Just clear ALL the programmed following remotes and keypads. Your gate opener will not recognize any signal now. And the previous remote device, which is missing, is totally gone.

How to Replace the Remote Battery?

Follow these steps to replace the G3T remote control battery with the CR2032 coin cell battery.

1. You need to open the remote control case utilizing a coin or washer. Use its fitting end into the slot at the upper part of the remote.
2. Restore the battery. Also do not forget to match the battery polarity signs inside the battery housing of the remote.
3. Now place the components and clasp the case closed.

Final Talk

We learned several things about the Genie remote control. Since many people wanted to know if they can use the same on the Liftmaster, we addressed it here. Even though Genie is a very popular brand among people still there are many questions about it, There are multiple alternatives like Stanley Garage Door Universal Remote.

In this guide, we tried that each process is easily understood by the readers. Finally, we would like to thank you for going over our article till now. We hope this article would be helpful to you.