How To Unlock Screen Door Stoppers? 

Screen doors are the best installation to keep our rooms airy. It does not let anyone intrude on our privacy. Because of it, we can feel the fresh breeze by being inside our house. Screen doors are also effective in providing home security. They block all unwanted entries.

Here, we will learn the simple steps to unlock screen door stoppers and it will save you the cost of hiring a professional for fixing or replacing your stopper. Here follow the simple steps to unlock your door stopper.

Steps To Open Screen Door Stoppers

You can unlock the stopper of your screen door all by yourself.

STEP 1 Pull of the cover

There must be valves attached to your door. Remove the cover from the valves. First, loosen the fasteners. Then slide the cover gently. It will open up the cover.

STEP 2 Open the valves

Open the valves attached to your door. You can use a screwdriver to loosen the screws. Rotate it clockwise and anti-clockwise. It will open up the valves.

STEP 3 Unlock the stopper

As soon as the valves get opened. The lock will get released automatically. It will then allow the door to move freely and without hindrance.

STEP 4 Adjust the speed

You can also adjust the speed of the door. Turn the black check 1.5 counterclockwise. You can also adjust it to 75 degrees if you want it to slow down. It will help you to keep the door intact. The door will not slam during the wind.

STEP 5 Test the door

Open and close the door twice or thrice to see if the stopper is unlocked or not. If not you can adjust and modify it again by following the same steps. To decrease the speed of your door rotates the valves clockwise. You can increase the speed by rotating it counterclockwise.

How to unlock the screen stopper without keys?

If you have lost your keys and you need to unlock your door. Follow these steps to get it open. Avoid using a screwdriver or a crow brow between the door. It will create a lot of damage to your door.

Method 1

Step 1 Remove the cover plates

First, remove the screws attached to the cover plates. You can use a drill machine to do that. The cover plate will be easily removed. Try to remove it from both the sides inside and outside.

Step 2 Pull off the locking screw

After the removal of the plate. You will find a locking screw holding the lock tightly into the place. There is also a wing attached on one side. You can use a multi-grip or an adjustable wrench to lock it up nicely. Grip it tightly and bend it towards the back of the door. It will get cracked easily.

STEP 3 Push the came out

Once the locking screw is out. You can easily push the cam out. With the help of a screwdriver, you can easily unlock it. There will be a black pin on the side. You will have to push it. Once you hear a click it means it is open. Turn the lever over and the door will open up.

Method 2

You can use these solutions if you want to unlock a door without a key.

• Locksmith

If you do not want to take the burden of opening a door. You can hire a locksmith anytime. They are always there to help you. locksmith tackles these types of problems every day. He has tools and various techniques to check what works.

• Remove the hook

If it is a spring door stopper. Then you must have seen that your door ring is attached to a hook on your wall. If you want to unlock the door. You should try to release the hook from its place.

• Remove the metal lock

If it is a hydraulic screen door stopper. Try to find the metal lock of your door. It prevents the valve from going deep. If you want to unlock the door, you can simply remove the metal lock.

How To Unlock Screen Chain Door Stoppers?

It is inexpensive. That is why it is the most common type of lock found in houses and hotels. Chain stoppers are the best for home security. There are two ways in which you can open a chain locker. It depends on if you want to open it from the inside or outside.

From inside

• Step 1

Hold the chain steadily and slide it away from the frame of your door.

• Step 2

Now lift the chain out of the metal casing to which it is attached.

• Step 3

Now you can easily open the door without keys.

From outside

• Step 1

If you are outside your house. Find out the things on the door that are obstructing you to get inside.

• Step 2

Wrap a rubber band around the chain. Remember you have to tie just one end of the rubber band. Try to wrap it close to the metal casing present on the door. Now pull it to the other end of the rubber. Do not leave a loose end in the rubber band as it can stretch the door handle easily.

• Step 3

Now stretch one end of the rubber band to the other end of the door handle. The rubber band will pull the chain out of the casing.

• Step 4

Now you will be able to open the door.

How To Unlock Screen Wall mounted Door Stoppers?

The wall mount stopper is installed at a height. It is installed where it can come in contact with the lever of the door. You can easily install and remove it.

• Step 1

Look out for the screws that are holding the wall mount stopper.

• Step 2

If your screws are a little rusty or badly corroded. Apply a lubricant or lemon to remove the corrosion. You can also use a screwdriver to remove the corrosion by tapping on the heads of the screw.

• Step 3

Now after a few minutes try to loosen all the screws of the stopper.

unlock Heavy-duty wall mount screen door stopper

They are the same as a wall mount stopper. But they are heavy. They are made of solid brass. They will take a little longer than the common wall-mount stopper.

• Step 1

Firmly close the door. Lock it while you start working on it.

• Step 2

Now remove the screws one by one. You can use a plier to loosen the screws. At last, remove the anchor bolt.

unlock Half Dome screen door stopper

This door stopper is strong enough to hold the door. If you have a half dome stopper you should follow these simple steps to unlock it.

• Step 1

Peel off the adhesive tape that is applied to your half dome when you installed it.

• Step 2

Pull the nails and screws out with a screwdriver.

Unlock Floor mount screen door stopper

It is made of stainless steel. These are used to stop the door to protect the items in the path. These come in different shapes and sizes. These types of stoppers are used in high-traffic areas. To unlock the floor-mounted door stopper follow these steps.

• Step 1

With the help of a utility knife, cut the perimeter of a door stopper. Also cut the edges of the door stopper from the top, bottom and sides. It will free them from the paint buildup.

• Step 2

Insert the pointed portion of the knife between the door stopper and jamb. Pry it until a small crack occurs on it. The crack should be at least ¼ inch. Now pry it with a screwdriver so that you can insert your fingers.

• Step 3

Pull the nails out of the jamb and also remove the three pieces that you have cut before.

Unlock Hinge pin screen door stopper

These door stops get attached to the door hinge. This type of hinge pin is installed on lightweight doors. Follow these steps to unlock it.

• Step 1

Firmly close the door so that it does not swing while you work on it.

• Step 2

Remove the screws from the hinge pin. They are the only ones holding it.

• Step 3

You will be able to open the door just after you remove the screws.

Final talk

In this article, you might have finally understood the purpose of a door stopper. There are different types of door stoppers. What type of stopper you should buy depends on the type of door you have. The most popular type of stoppers is- skirting door stoppers and floor-mounted. It saves our doors and walls from being damaged. It adds decoration to our room. People use stoppers for several purposes. Some for decorative, some for security, some for ventilation. Choose a really good stopper. It should not be cheap. Because it is the ultimate tool for your safety and your house’s safety.