How To Set Motion Sensor Flood Lights?

If you have motion sensor lights then their set-up and complete installation has to be done properly. In this guide, we will show the exact procedure to set motion sensor flood lights. It can make your life easier and secure ahead. Let’s go through the entire process.

How To Set Motion Sensor Flood Light?

Quick Navigation

In this part, we will look at the way through which we can set a motion sensor floodlight.

Total Time: 18 minutes

Step 1:

Firstly, you have to set the sensor. It can be either minimum or maximum according to your requirements. Minimum can detect the neighbors coming to your house. Whereas maximum can detect some street cat coming near your house.

Step 2:

Now, you have to set the time limit. It can be 5 minutes, 6 minutes, 20 minutes, etc. This time is actually the amount of light that will glow when motion is sensed.

Step 3:

Remember, that your sensor can detect when it is getting dark. So you can set the light accordingly for 6 hours, 8 hours, 12 hours, and so on.

Step 4:

There is also an option for dim light, bright light, etc. all these features will be clearly visible.

Step 5:

Now, switch on the sensor. This means you have to switch on every program that it shows.

Step 6:

This can be time limit, amount of light, etc. move the sensor wherever you want to move it. There has to be a point where the motion is to be sensed.

Step 7:

Now, put your hand under that position and check whether it is working or not. The light must glow when the motion is sensed. Check at least 3-4 times.

How Do You Adjust It?

Adjusting the motion sensor on a flood light

Here are the detailed steps to adjust the motion sensor on a flood light:

Step 1: You can absolutely adjust the motion on your sensor. You can do it by setting your sensor on maximum mode.

Step 2: Now, on setting on maximum mode, you will see that the light will automatically glow up. This is because the target area is very wide.

Step 3: Now, you can adjust the sensor according to your needs. Make sure that you adjust it in a way that the light glows only if someone comes really close to your house. Step 4: For this, you can check it while standing in different positions. The lesser the proximity is, the minimum is the sensor. While checking makes sure the light is well lit. it might be a little hectic and difficult process to do.

Step 5: But the thing is that while adjusting you need to follow the light at all times. Without following the light properly it will be very difficult for you to adjust your sensor.

Step 6: This might be confusing, but make sure you do it accordingly as it is important for your safety.

Why Does My Sensor Light Stay On During The Day?

As mentioned above, while setting your motion sensor light you have to decide. For how much time do you need the light to glow when motion is sensed. It can be either 20 minutes, 5 or even 1 minute. But if they are not working that way and are glowing for a longer period then sadly you need a reset.

One more problem that can occur is that may be your motion is having problems in detecting dusk and dawn. That can be a reason why it is not turning off even during the day. In such a situation you can take the help of an electrician or can manually reset the sensor.

How Do You Program A Motion Sensor?

Here are the steps to help you program a motion sensor:

Materials required: Motion sensor lights

Time required: 20- 30 minutes

Procedure:

Step 1: First of all, if your motion sensor is showing some kind of problem in working. Make sure you first try to reset it. Try to reset it 1-2 times before reprogramming it.

Step 2: Now, go inside. If your sensor is attached to an on and off switch, try to on and off the sensor 3-4 times. Off the sensor and after 7-8 seconds switch it on. This shall work with the reprogramming.

Step 3: Let us jump to the other case if this doesn’t work. Go to your breaker panel and switch it on and off several times.

Step 4: First, switch off the switch that is attached to your sensor, and then after a minute or so switch it on again. This shall definitely work for your motion sensor.

Step 5: Still, if this does not work then there is just one option. To buy a new motion sensor and replace it with your old motion sensor and replace the whole fixture.

Final Talk

At last, we would like to say that we hope this article helps you. We would like to conclude that the article is based on proper research on how to set a motion sensor light. The article is based on the setting of a motion sensor light. Do not get confused with installing a motion sensor light. This article is based on what to do after you install your sensor and how to bring it into existence. Moreover, you should get the best motion sensor light under your budget.

After, we have discussed some of the most asked questions and have tried to come up with good solutions. We hope that this article would have helped you In setting up your motion light sensor. Do make sure that you go through each line of this article. Before actually setting the motion light sensor. This is to avoid any accidents.