How To Replace A Sliding Glass Door Lock?

Replacing a glass door can be an intricate procedure if it’s your first time. But trust us, you can surely do it all by yourself. Without spending anything on any kind of professional help. We can help you with this with our in-depth how to replace a sliding door lock guide. Will tell you about the basic tools you will need in this process. Here, we present you with an in-depth guide for the same! Follow each step carefully to this DIY task.

Steps To Change A Sliding Glass Door Lock:

Quick Navigation

Step 1: Observe The Lock And Its Parts

Look for the condition of the lock if it’s in a good working state. Try by adding some lubricants like oil. You should clean it if you see any obstructions in the line. You can reuse the parts which are functional in your new lock.

Step 2: Remove Screws That Are Holding The Lock Handle

There are normally two screws situated on it consequently. Some handles may have more. Take a screwdriver. Start removing the screws by rotating the screwdriver anti-clockwise. After removing them, keep them aside to use on the new lock. You can replace them with great durable glass door handles.

Step 3: Dismantle And Remove The Old Lock

After you have removed all the required screws. You can now go on to remove the whole lock. Start dismantling the lock. You need to clear the space for your new lock.

Step 4: Take Measurements

For this, you need a measuring scale or tape. You just need to take measurements for your new lock. Analyze the length and breadth of your new lock concerning the door.

And simultaneously write measurements you want your lock to be. This will help you to choose your lock more accurately in the store.

You can also take your old lock for comparison. It will help you to select the identical lock. And hence will fit in with all its screw holes.

Step 5: Set In Place The New Lock

Place your new lock just in the place your old one was. Bring suitable screws and set induct them in holes. Tight them by using a screwdriver. After you have installed your new lock.

Check if it works properly by using it. See if any screws are left loose. If everything is alright. Congratulations you have accomplished your work!

Tools Needed

You don’t need many things for the installation. Most of the tools are easily present in households. If not you can find them in your near hardware shop. Let’s get going with our list.

1. New Lock

For the new lock, you should research the brand and type you need. Your new lock must be perfectly fit for your door. Remember that each door has specific types of locks that fit them. Measure the size you need. So that you can find the lock correctly.

You can take your old lock for the sample purpose for the new locks. For amenities, find a lock with an interior handle and an outer pull. It has a key cylinder on the outside. It should also have a mortise pin and thumb lock.

2. Screwdrivers

A screwdriver is the one tool you are gonna need actively in this process. This is important that you get the right size for the same.

Make sure to look for the size by comparing it with present lock screws. Most of the locks need a flat-shaped screwdriver. But some may have cross-shaped screws.

You need to look for the shape and size of the screws first. So that you can tight them perfectly.

3. Lubricant

Lubricant helps to fix the lock and keep it smooth working. You should regularly apply Lubricants to your machine parts. There are various kinds of lubricants you can use.

For example, WD-40 also clears any dust and debris on your lock. Moreover, you can also use oil instead of lubricants if you’re unable to get it.

We would suggest you keep a lubricant in your house anyway for regular uses. Lubricants are safe to use and help in mountainous of your lock.

4. Measuring Tape Or Scale

You need it for the measurement of length and breadth for your new lock. It is important that your lock fits perfectly in your door.

As we all know how important a locking system is for a door. You can try a measuring tape or a ruler. Measure the distance between gaps and the size of the whole lock cylinder.

Any cloth and a lean object to clean for cleaning.

You will require a lean object for lubricating your lock. The lean object can be a pencil or any wooden stick that will do. Use them as reaching the areas of the lock where your hand can not for lubrication.

A cloth is required for better cleaning of the lock. Often cleaning can get your despaired locking system to work again.

FAQs

1. Can I replace the sliding door lock easily?

Yes, it is rather easy to replace a sliding door lock. By following the checklist we have provided you with the right tools. And by following each procedure carefully you can change your sliding door lock.

The tools required like screwdrivers and lubricants are most easily available in our households. You only need the new lock you wish to install. The process is also accomplished in just a few steps.

It will hardly take 30 minutes for the installation of your new lock. Just a little care and knowledge as we have provided is important. It will help you avoid any harm to you or your sliding door.

2. Can I change my locks myself?

You can undoubtedly change your locks all by yourself. You just need to know basic jobs around screwdrivers. Changing the locks may look to you as a hectic process. You may think of it as a professional’s job. But it is indeed not. Most of the locks come with full facility instructions for the installation.

There are also customer care hotlines available with many. You can just have them for any additional assistance. If you don’t have any of the tools we have mentioned above. You can very easily get them from any near hardware shop.

3. How do you remove an existing door lock?

For removing an existing door lock you need to grab a screwdriver. It should be the one that fits the head of the lock screws perfectly. Start removing the two or more screws you see on the lock.

Do it by rotating the screwdriver anticlockwise after fitting in the screw heads. After removing the screws, you can remove doorknobs. You need to dismantle the different parts if they are stuck differently to the door. Such as you can unscrew the faceplate if you want then peel off the latch.

4. How to remove a Doorknob with No Visible Screws?

For this type of doorknob, you need to first discover the screws. All door locks have a padlock beneath them. It is for holding them. It appears as a small rectangular hole. You will need a screwdriver or anything like a paperclip to shove the knob. This will lead to opening the latch.

And the discharge of the inner of the knob. Now withdraw the interior rose plate. You can see the screws in them, remove them with the help of a screwdriver. Lastly, you can unscrew the faceplate. Now your doorknob is fully detached. You can just pull it out.

Final Talk

In this section, we actually saw that we can replace the sliding glass door easily. You should try this. It will help you to be independent and learn a new skill. It will be reasonable as you can save some of your bucks. For additional protection, you can install a high-security barn door. We hope you find this article useful. We would like to solve your further concerns. Stay tuned with us.