There are various steps that you need to follow to increase the life of your safety cover. If you don’t remove the safety cover properly. It can get damaged and you won’t be able to use it anymore. In this article we have provided the detailed steps on how to remove the pool safety cover. So that the safety cover can be reused.
Methods To Remove Pool Safety Cover
Quick Navigation
You can easily remove the pool safety cover. If you follow the steps properly, you can reuse the safety cover. It usually takes around ten to thirty minutes to remove the pool safety cover. But it may take a little extra time to clean the safety cover properly. Make sure you clean the cover properly because you don’t have to do it often.
1. Clean Before Removing The Cover
When the pool is covered a lot of dust and dirt gets collected over the cover. There are things like tree branches also that can fall over the cover. So you have to properly remove all the dirt before you open the cover.
So that the dirt doesn’t fall in the pool when you open the cover. Make sure that there is no dirt left when you remove the cover. To protect the cover against damage. You can use a garden hose to clean the top of the cover.
You also have to remove the water that gets collected over the cover. This ensures that the dirty water doesn’t fall into your pool. You can remove the pool cover when there is no dirt left on it.
2. Remove The Springs
If you want to remove the cover from the swimming pool. The cover springs will have to be removed. And also screw-down anchors that are used to close the pool. Installation rod can be used for removing these springs. You get the installation rod with the cover.
3. Lower Down The Anchors
After removing all the springs, use the hex key to push the anchors lower into the deck. The anchors should be pushed down to the deck so that the cover does not get stuck in it. When you remove the cover.
Make sure to properly push the anchors downward if you don’t want to damage the cover when you are removing it. Check for the anchors twice to prevent any damage to the cover.
4. Remove The Pool Safety Cover Properly
It is very important to properly remove the cover if you want to reuse it. The cover should be folded like a piece of paper. Fold the cover parallel and reach it’s end. Make sure the fold is easy to open. So that you do not damage the cover when it is opened.
Accordion-fold is the best fold to use while folding the pool cover. It can be easily opened and reused. Fold the cover and put it in a clean surface.
5. Clean The Cover Thoroughly
Clean the pool cover properly. It is very important to clean the cover before storing it. If you want to reuse the cover. You can use water and soap to properly wash the cover. Make sure that there is no dirt left when you store the cover. This will protect the cover against damage. And you should be able to reuse the cover.
6. Rinse
Properly wash off all the soap or detergent that you have used to clean the cover. You can use a hose to wash it properly.
7. Store The Pool Cover Properly
Make sure the cover is completely dry when you store it. If you store the cover when it is wet. Mold and other fungi can grow on it. And it can damage your cover. Make sure to properly fold the cover and store it in the storage bag. It is difficult to fold and store the cover yourself. So you can ask someone to help you. Two or more people can fold the cover very fast.
Tools:
- Installation Rod
- Helx Key
Materials: NA
How Do I Remove A Solar Pool Cover By Myself?
You can use a specialized reel to remove the solar cover easily. It is the easiest method to remove a solar cover. However if you don’t have the reel you can also do it manually. Make sure that the cover sides are perfectly straight. You have to draw black marks on the edge of the cover.
Make sure that the black marks are at a distance of one inch from each other. So that the marks can fit over each other. Pull the cover off and lay it on the ground near the pool. Pull the other edge of the cover to the corner. Fold the cover back and forth.
The first mark should be at one folded crease and the other mark at the second crease. Repeat this process again in the other end of the cover. The folds should converge to form a complete fold on the cover. Repeat this process again with the black mark. Repeat the process until the entire cover is folded.
FAQ
1. How To Remove Pool Safety Cover?
Removing the safety cover of the pool is easy. And you can do it yourself. Make sure to clean the cover before you remove it. So that no dust or dirt falls into the pool when you remove the cover.
You will have to remove the spring using an installation rod. You get the installation rod when buying the cover. You also have to push the anchors down to the deck. So that the cover doesn’t get stuck when you remove it.
Clean the cover properly before storing it. So that the pool cover can be used again. Wash the cover with soap or detergent. Leave the cover to dry before storing it. This prevents fungi growth in the cover.
And protects the cover against damage. Make sure to properly store the cover so that it can be reused.
2. When Can I Take My Pool Cover Off?
You should take the pool cover off when the temperature is higher than seventy degrees. Because this temperature prevents algae growth in your pool. Open the pool in the summer season and make sure the temperature is high.
3. Can I Leave Pool Uncovered In Winter?
You shouldn’t leave your pool uncovered during the winter. Leaving the pool uncovered for a long period of time can create various problem. The pool will become dirty. And there will be algae growth in the pool.
An open pool also contains various microorganisms and contaminants. These contaminants in the pool are harmful for your body. Leaving the pool open can reduce the lifespan of the liner. The sun reduces the lifespan of the liner.
Leaving the pool open will make it dirty and contaminated. You will have to clean the pool properly in the spring. When you will use the pool. It will take much more time to clean the pool if it is left open.
You may have to change the liner if it gets damaged. So it is advised to close the pool. Closing the pool will save your time and money. And you won’t have to worry about getting a dirty pool when you open it.
4. Should I Trim Solar Cover?
If the solar cover doesn’t fit the in your pool. You can trim the solar cover. A solar cover only works when it fits properly in the swimming pool. So if the solar cover doesn’t fit properly in your pool. You will have to trim the solar cover for it to work.
5. Should I Take My Solar Cover Off During The Day?
The solar cover should be removed in the morning. You can put it back up in the evening. If you don’t use the cover during the day it will heat the pool properly. You can trap that heat in the pool if you use the cover during the night.
Solar cover prevents the heat loss during the night. You can put the solar cover when you are not using the pool. The water also heats better when the pool cover is off.
So it is better to remove the solar cover during the day for better heating. And put the cover back during night to trap the heat.
Final Talk
Pool safety covers are expensive so you should remove them carefully. Make sure that the cover doesn’t get damaged when you remove it. The cover should be removed carefully so that it can be reused. Properly clean the cover before removing it. So that the pool doesn’t get dirty when you open the cover. Make sure to properly follow all the steps of removing the cover.
Leave a Reply