How To Remove Lever Door Handle Without Screws?

Do you want to remove a lever door handle without screws? Is it becoming a challenge to find the screws or to know whether there are screws in the handle or not? No need to worry because we are here to help and give you the best lever removal methods verified and tested by our team twice.

Methods To Remove Lever Door Handle Without Screws

Nowadays, people use a lever door handle instead of traditional doorknobs. These look beautiful on doors and are also easy to operate.

But, it becomes difficult in case we need to open it without screws. In order to do it easily, we are going to require:

Tools Required:

1. A Screwdriver

In the case of a modern one, we’ll need a Phillips screwdriver whereas, in the case of a traditional one, we’ll need a flat head screwdriver. In case we are unsure about which one to use, we can keep a set of Phillips screwdrivers.

Screwdrivers will be used both in the case of old mechanism handles as well as new mechanism handles. It is important to choose the correct size of the screwdriver to avoid any complications.

2. A Paperclip

It is the most necessary part for us to complete our procedure. A small, straightened paper clip. It can be straightened using our hands or a pair of pliers. We need to be careful while straightening it using pliers, as there is a chance to get hurt.

But straightening it with pliers is better than straightening it using our hands as we will not have to worry about applying too much pressure.

3. Allen Wrench

An Allen wrench, of any common size. It is like a driver which is used for screws or bolts, that are hexagonal in shape. They are also known as “hex keys”.The common sizes include 1/16”, 5/64”, 3/32”, 7/64” and 1/8”.

It is most required for sockets that are hexagonal in shape. The Allen wrench will be used to remove those sockets. They can be easily found in the market.

4. Time

For an experienced person, it might take only a few minutes to complete the process. But for someone who is inexperienced, it might take longer, as they will first have to identify all the parts.

Then, slowly complete the process, by trying different combinations and applying different forces. So, it is quite obvious that time will be variable from person to person.

Step 1: Look For The Hidden Slot

We need to look for a circular plate. It is most likely to be placed around the lever. It is called the rose, and it keeps the set screws hidden from tress-passers.

The rose can be removed by pulling it with our hands, or it can also be twisted to be removed.

Step 2: Take Out Any Hidden Screw

When we remove the rose, we’ll be able to see the hidden screws. We need to remove those exposed sets of screws carefully, using our screwdriver.

After unscrewing all of the set screws, we need to release the lock and the lever as well. It is better if we store the set screws in a proper place, as it may be valuable to us when we put it all together.

Step 3: Tackle Hex – Head Screws with Allen Wench

After completing our second step, we need to search for a pinhole that will appear on the body of the lever. Then we need to use our straightened paper clip and insert it into the pinhole.

We need to keep in mind to apply the right amount of pressure, and then push the release button located inside.

Then we will be needing the help of an Allen wrench. Fasteners securing the lever base can be removed with the help of an Allen wrench. After this process is completed, we need to pull the lever and remove it.

And we are done with the process. This is an easy process, and if done in the right way, can yield results on the first try. It requires an ample amount of practice.

Old Door Handles Lever Removal Methods:

What we learned above was how to remove the handle in the case of modern door handles. Now, we will discuss in brief how to remove them in case of old door handles.

Step 1: Remove The Rose Trim

We now know what a rose trim is. Before removing it, we need to make sure to look for depressions on our lever/slots. After the depressions are found, we need to remove the rose trim.

We can do this by inserting the flat head screwdriver inside and pushing our release button simultaneously.

Once done with this, we need to remove the rose trim by pulling it out, exposing the internal mechanism of our lever.

Step 2: Cut The Wire And Remove The Lever

Old levers wires are usually stronger and better secured. In the previous step, we had exposed the internal mechanism of the lever.

Now, we need to find the wire, which wraps the internal mechanism. Then, we need to cut the wire. Doing this will release the lever.

Then, we need to remove the lever and the parts of the lever and take it out from the door. With this, we have accomplished our last step.

Now, we are well known for how to remove the lever both in the case of modern as well as old door handles.

It does require a lot of patience and knowledge, and carelessness can damage our system. We can do all that is said, step by step, and achieve the goal.

How To Remove a Kwikset Lever Door Handle Without Screws?

In order to remove a Kwikset lever door handle without screws, we need to apply a little push on the door handle. A flathead screwdriver can be used to do this.

Using a flathead screwdriver, we need to check out if the release button is revealed.

After revealing the release button, we need to move it in the direction where the arrow suggests. And our mission is accomplished.

How To Remove a Schlage Lever Door Handle Without Screws?

First of all, we need to look for pinholes in the body of the lever. Then we need a paper clip. We need to straighten the paper clip.

We need to keep in mind to stretch the paper clip with one end bent. We can do it using our hands, or a pair of pliers.

In case straightening it with the help of our hands, we need to be more careful and active, to avoid hurting ourselves.

Then we need to insert it into the hole by applying a little pressure on the paper clip. This will release a small button inside. After that, the lever can be easily removed.

Final Talk

In this article, we came across the different types of door levers and how to remove our door handle without screws in case of different types of door handles including modern lever door handles, traditional lever door handles, Kwikset lever door handles and Schlage lever door handles. Removing handles of all these require different kinds of steps.

The steps need to be performed correctly in order to get accurate results. Removing handles can be tricky for a newbie, but experienced men can do it in the very first trial. However, if we are well aware of the parts of the handle, the delicacy of each part, and the correct way to remove each part, it can be a very easy process and we need not worry about failure.