A deadbolt is a lock that has a bolt and you need a key to unlock it. It doesn’t have a spring system like other door locks that can be unlocked by knife, blade or card. So, if you want to remove a Kwikset deadbolt lock without screws then you can follow the below given simple guide.
Steps To Remove A Kwikset Deadbolt Lock Without Screws:
Quick Navigation
People love using new things in their lives. New technology can be helpful but problematic too. It can be very troubling in many situations. Many people are not used to these items.
They can fail to remember how to operate it. We know very well a deadbolt lock opens by a key only. There are some events where you want to remove the lock but you failed.
Here we will discuss ways to remove the deadbolt which has no visible screws.
The steps to remove a Kwikset deadbolt lock without screws is as follows:
Step 1: Stand Facing The Door Inside The House
Step 2: Remove The Thumb Turner Latch
Step 3: Remove The Base Plate
Step 4: Unscrew The Visible Mounting Screws
After these, you can remove the lock system completely and install a new deadbolt lock.
If you are still helpless to remove the deadbolt, then look for a professional. They will help you to remove it and install a new one.
Why It Is Difficult To Unlock?
Kwikset deadbolt locks are one of the best security locks. These locks are impossible to damage or do any harm. It protects against breaking in without keys.
It is the best way for the safety of your house. It provides the best techniques which are not found in old locks.
Kwikset lock uses a pin and tumbler lock system. It has matching cuts on the key with bottom pins inside the cylinder plug. The given key only matches with the pattern inside the lock.
if you have lost your key, you will face problems.
Why Can I Not Get Kwikset Deadbolt Off?
Installing a deadbolt to make extra security is important. But there are incidents faced by people who can’t get the deadbolt off. They have many incidents like broken keys, locks, technical issues.
They have to contact experts to deal with it. Pulling a Kwikset deadbolt is done by accessing the screws that carry the lockset. Some have covered screws and you need to check them before removing them.
You need to have an understanding of screwdrivers, which one to operate when required. If removing by self doesn’t work, contact the company for services.
How Do You Remove Double-Keyed Deadbolts?
Are you facing a problem with a stuck deadbolt lock? do not worry, follow these steps which will help you open the door.
1. Remove the mounting screws connected to the plate: First, remove the mounting screws before removing a stuck deadbolt. Using a screwdriver, remove the screws.
2. Pull the front plate off the door: after removing the screws, the plate falls. If you face a problem, use a flathead screwdriver to remove the front plate. You can try to pull the plate from the door.
3. Push the backplate out the other side: Outside of the door, you will find the backplate.This plate will fall off after removing the front plate. If you see an issue, use a screwdriver to poke under the deadbolt. You can apply some pressure to push the plate and it will fall.
4. Pull the clip out of the base of the deadbolt: to remove the clip try a flathead screwdriver and press it down. It will drop from the deadbolt.
5. Remove the deadbolt: to remove the deadbolt from the door, find the topper on the top of the deadbolt. To push the topper back, use a flathead screwdriver.
This will release the locked door and it will open.People get panic when in situations like a locked door or trapped inside. They need to keep in mind these steps and carry small tools like clips or pins which will help you out.
What Do You Need To Open?
Many tools are available to open the lock from a simple pin to an advanced screwdriver kit. You can check online sites for toolboxes with all necessities required at home for such time. You need to be well aware of the tricks to open locks too.
Locksmith uses tools like tripwire, hex keys, plastic shims, drills, etc. Bobby pins or hairpins operate well. You can also use different rigid pieces of wire.
First, create your pick by opening one of the bobby pins or paperclips until it’s straight.You have to bend the edge of the wire and enter into the lock space. A well-known method of opening a lock is lock-picking. This process generally needs a set of lock-picks; using a pair of paper clips.
Drilling a lock is another method. Drilling will ruin the inner parts of the lock. You will have to replace the lock and other parts of the door
Final Talk
We are replacing everything with the latest technology. We are making our lives better with those items. There are times, these things can create problems too. We are using smart deadbolt locks in place of the traditional lock. When we forget keys or passwords, we get stuck outside. We need to be aware of the ways to unlock these doors. Many companies are making efficient items. Any age can watch and understand its uses. If you still face trouble, you can contact the company for help.
Leave a Reply