The lock cylinder helps to ignite the air-compressed fuel inside the engine. It is also true that it is difficult to turn on the cylinder if you don’t have the key. But, we have many options to remove the ignition lock without a key in minimal time. You will be able to start the car easily.
How To Replace or Fix an Ignition Lock Cylinder
Quick Navigation
Total Time: 25 minutes
1. Battery Disconnection
One of the foremost and important steps in removing the lock cylinder without using a key is disconnecting the key from the vehicle. Disconnection of the battery ensures proper safety and security of the vehicle, to prevent electric shocks and damage
2. Steering Wheel Removal
Another step in removing the lock cylinder without using a key is removing the steering wheel:
1. Withdrawing screws from both the uppers and lower covers of the steering wheel is one of the crucial steps in this method.
2. The covers of the steering wheel need to be moved up while rotating off the wheel upwards and taking it out at the central cover.
3. And now you can disconnect the wires to the car horn and pull the steering wheel off its shafts.
3. Remove Wiper And Indicator Switches
Wiper and indicator switch clean and control the vehicle and it is one of the key components of the automobile. The next step in removing the lock cylinder process requires the removal of wiper and indicator switches from the steering wheel.
4. Removal Of The Steering Column Sleeve
After removing the wiper and indicator switch, elevate up the steering column sleeve from the steering wheel column.
5. Disconnecting Electric Connection To The Ignition Switch
Another step involves the disconnection of electrical components to the ignition switch and it involves the following steps :
1. Firstly all the mounting screws are removed and the switch out is taken off.
2. All the wires that are found at the back end of the ignition lock cylinder switch are disrupted.
3. After that loosening of the top of the tabs is done to take out the switch.
6. Take The Mounting Bolts Out And Check The Bolts
Mount bolts and screws on the ignition switch are removed by using a socket wrench or a flat screwdriver. Sometimes a pin is moreover inserted into a pinhole to activate the cylinder’s release mechanism.
7. Insert A Straightened Paper Clip Into The Lock
Inserting a straightened metal paper clip can be an alternative method to remove the lock cylinder without using a key. Straightening the paper clip and making it long enough can prevent the paper clip from being twisted and can be inserted successfully.
8. Insert A Flat Head Screwdriver
Another efficient step to remove the lock cylinder without using a key is by using a flat head screwdriver. Turn the flathead screwdriver in an anti-clock direction as much as possible, Take the help of a paperclip to pull and slide the switch out of the lock cylinder.
9. Remove The Ignition Clock From Its Place
After gliding the switch from its place, the ignition lock cylinder will emerge out by following the mentioned steps properly.
Tools:
- Boxed And Wrench Sets
- Flashlight
- Replacement Ignition Lock Cylinder
- Flat Blade
- Head Screwdriver
- Small Flat Blade Screwdriver
- Power Drill
Removal Of The Different Ignition Lock Cylinder Keys
Here is the detailed procedure to remove another ignition lock. It is mostly similar but a few things will vary from vehicle to vehicle.
1. Remove the ignition lock cylinder without key chevy
It is very critical to remove the ignition cylinder to prevent it from any damage. So here we present to you some steps that will be quite helpful for you and it is essential to disconnect the batteries as mentioned earlier.
2. Access your ignition switch
To work with your ignition switch properly, it is necessary for you to first remove your steering wheel by using a flat-sided screwdriver and a tension wrench.
3. Take out electrical connections
After removing the steering wheel cover by screwdriver, all the electrical connections of the vehicle should be disconnected to prevent electrical shocks.
4. Get bolts out from the switch
Now all the bolts are removed from the ignition cylinder to disconnect the ignition switch’s assembly and housing.
5. Replace the old unit
After removing all the old components such as bolts, ignition switch and steering wheel cover. Now it’s time to replace all of them with a new switch.
Methods To Remove Without Key Ford :
In the case of ford cars, the removal process of the ignition lock cylinder without using a key is similar to other cars’ removal processes. But still, it involves some extra steps and which are as follows
1. Get the airbag out
Firstly the battery’s negative terminal and the airbag is removed. Taking the airbag out can help you to prevent unwanted injuries.
2. Remove steering column and lower dash cover
To remove your ignition lock cylinder without using a key, it is important to remove the steering column and lower dash cover. After that cover the steering column and level of the steering wheel with a clip.
3. Use a screwdriver and a straight clip
To slide out the cylinder easily, a screwdriver is used and the straightened clip is side by side. The lock cylinder’s snap rings come out and sliding of the cylinder should be done carefully.
4. Use the new lock for the tumbler saving
The new lock’s tumblers need to be matched with the initial key, therefore the new lock’s tumblers are re-configured. After matching the old and new tumblers jointly, the new cylinder is redeveloped.
Methods To Remove Without Key Dodge:
Removing the ignition lock cylinder in a dodge is different and it involves the following steps :
1. Depress the retainer pin
The retainer pin should be depressed to open the ignition to grab it out of the column. It is usually advisable to keep your ignition lock at the ON position while the pin is depressed and a drill should be used to depress the retainer pin.
2. Remove the plastic from the steering wheel column
Peeling off the steering column plastic is one of the crucial steps in removing the ignition lock cylinder. It ensures easy access to the main electrical components of the cylinder such as the electric switch and lock.
3. Pull the lock from the switch
Pulling the lock from the switch requires the following steps to be followed :
- The active retainer is depressed to release the lock.
- After that, the lock and switch are removed to get the active retainer.
- The switch is turned ON and the active retainer pin is depressed at the same time.
- After pulling the lock, the switch will be easily removed.
Methods To Remove Without A Key:
The ignition switch is one of the main components of your vehicle and is responsible for initiating the vehicle as well as for providing power to the specific components of the vehicle.
Step 1: Drill a hole in the key slot of the ignition cylinder
Drill a big hole in the key niche of the ignition cylinder to the screwdriver and drill to the tip of the keyspace.
Step 2: Insert a straightened paper clip
An untangled metal paper clip is inserted into a slot almost to the left of the keyspace.
Step 3: Insert your screwdriver and pull the paper clip
Now insert your screwdriver into the cylinder and turn it as far as possible. Pull both the screwdriver and paper clip to glide the switch-off of its existing position.
Final Talk
We hope that all important points are covered in this article and it would be helpful for you in the future It is usually advised to consult a technician whenever you are facing any issue with the ignition lock cylinder.
But in cases when you have enough knowledge and practice to handle these issues on your own, it makes your working process easy, comfortable, cheap and efficient.
Leave a Reply