Anxious about keeping documents safe from burglars and fire, a fireproof safe is useful for keeping our documents and other stuff confidential but at the same time easily accessible. It is a fireproof storage unit designed to protect documents in the case of a fire by keeping the internal temperature below 350 degrees F.
But if you forget the key in emergency and you want to know the right procedure to open a fireproof safe without key then we have a complete step by step solution below.
Methods To Unlock A Fireproof Safe Without Key
Quick Navigation
To open the fireproof safe without a key you have to put your earth magnet in the sock. By placing the magnet in the place where the nickel solenoid of the safe exists. Once you place the magnet, turn the safe knob, and open it.
Total Time: 25 minutes
1. Unlocking A Safe With Rare Earth Magnet
Neodymium magnet is the rare earth magnet required for unlocking your safe in just seconds. Remember that your magnet must have a pulling force of 120 to 300 pounds that is available for under 20$.
We should be careful when using it. Follow the procedure given below:
a. Take the sock and manet and before attaching to the safe make sure to slide the manet a little bit as safes used ave small areas and continue sliding till safe is open.
b. Neodymium magnets are permanent manet and are quite durable.
2. Using The Bounce Or Smack Method
If you have digital lock ten this method of unlocking is ideal. The bounce method is easy to apply as in this you ave to put safely on the surface after which holding it wit foot while in support by the bot and on either side ten, try to open the safe.
Smacking the top part of the solenoid with the working hammer is another method for unlocking the door but it is required to be carefully done and repeatedly until the lock is not open.
3. Using A Nail Cutter Filer
It is commonly used for opening safes. It is simple to use as you just have to insert the tip of the nail cutter into the keyhole and put it up and down and rotate the filer till the pin is released. To put it simply you have to put the sharp end into the hole of the lock and twist it in either ways until the lock is unlocked. Do remember to use this method carefully and mostly to avoid such a method as it may ruin the lock functionality.
4. Using A Screwdriver And A Knife
A knife or a screwdriver can be used to unlock the keys. Insert the tip into hole ten slide in a specific direction or rotate it till pin i.e. inserted is not released. We must ensure that knife or screwdriver’s pointed tip fits into the keyhole.
Using these tools is quite similar to using a nail cutter filer. Hence if you lack a nail cutter you may use the above tool but have to be carefully handled and used. If in case you are not confident enough to use such tools then it is prescribed to not use it and take the help of people around or wait for a professional to unlock.
5. Using A Bobby Pin
It is the most reliable and quick measure to unlock locks as it works on most safes. A safe unlocker that a child knows.
The procedure of using a bobby pin for unlocking:
a. Insert the bobby pin in the lock. It is advised to keep pressure on the pin as you elevate each lock. Using a second pin would help.
b. Rotate the bobby pin once you insert it in the lock until you hear a click. Resemble bobby pin as a key and rotate it
c. Re-insert the bobby pin if the lock is not opened Continue to rotate the pin until it turns out to be successfully opened.
Tools:
- 1. Paper Clip
- 2. Screwdriver
- 3. Knife Or Similar Tool
- 4. Can Use Drillers For Drilling
- 5. Nail Cutter Filer
- 6. Unlocking A Safe With Rare Earth Magnet.
Materials: NA
Can Anyone Unlock A Fireproof Safe Without A Key In The House?
Almost every person is so busy in their regular work that to lose a key is very common. There are many tools in the market for unlocking but all means depend on your lock situation, emergency for unlocking, and availability of tools.
If your safe is not homemade, It is advisable as much as possible, do not to open your safe because it can damage the lock mechanism. Several methods can be practised at times:
a. Prying or drilling: Usually we lock our documents in our safe where drilling may be applied in case you lose the key. Prying too can be done but it requires extra strength and a prying bar.
b. Using a spare key: It’s the best way to get rid of losing the key. As we have system backups similarly keys do have demand for their spare keys.
c. Drilling a lock: This method is often deployed when you no longer require the locked cabinet. In this, you have to drill the hole perpendicular to the lock and have to repeat it until it is unlocked.
d. Use a knife: use of a knife in unlocking must be carefully handled as it can hurt you. For unlocking the lock by the use of a knife you should use a sharp knife. Move the knife in the keyhole and insert it in, tats it now it will easily be unlocked. Remember to sift it in either clockwise or anti-clockwise directions.
e. Hire a Locksmith is the best you can do if you want your document and safe in the same way as they carry special tools for unlocking the locks without causing any damage to the surface of the lock.
f. Ask the manufacturer as they can help you to unlock the lock as you can contact them and ask for additional keys, it will take time. Try it out if you have time only.
How Does One Unlock Small Safe If Key Is Lost?
Sometimes, you often lose the key or forget the combinations of locks, but should have an idea about the procedures to take in order to unlock the safe without the key.
There are various options available which include:
Drilling your way in to open the safe: Drilling the lock is the best and quick way to get your important stuff if you have lost a key and want your document urgently.
1. Using A Knife
This method of unlocking is quite common for unlocking the lock at home. Use a sharp knife is recommended and inserted in the keyhole after which you have to rotate on either side.
2. Hammer
A tool like a hammer is a method that requires strength though it totally destroys the safe. Screwdriver, paper clip, and magnet are other tools that can be used to unlock the key. Every tool has its own advantage or disadvantage but at times of unlocking the lock, we should be careful in handling them. Moreover, before buying make sure you choose a fireproof safe with a heavy body next time.
Final Talk
These are all levels of methods on how to open a fireproof safe without a key. You can try all in case of emergency but it is advised to not lose your key. These methods damage the safe or might lessen its efficiency. If you’re not confident about unlocking the safe it’s better to call a locksmith or the manufacturer of the safe for unlocking it.
Leave a Reply