How To Mount A Baby Monitor?

Mounting a baby monitor is simple. You can either take help from an electrician or do it by yourself. Wrong placement can obstruct the vision of your baby’s room which is not a good sign. You need to try different places to mount your camera until and unless you get the perfect spot. Read the article till the end to get a better understanding!

Method To Mounting A Baby Monitor

An individual has a lot of choices when they have to install a baby monitor. However, there are several methods which are explained below:

1) On the wall

Parents believe the safe and secure place to put a baby monitor is on the wall. It covers the entire room and is high enough to keep the monitor and wires out of reach.

Placing it on the wall covers the whole place. Moreover, baby monitors and wires are beyond the range, which is considered safe for the child.

Drilling holes and a mounting kit are required for wall mounting a baby monitor. If your device was made to be wall-mounted, the mount may already be included.

Some monitors, like:

• VTech Safe
• Sound Pan
• Tilt video monitor

It makes the installation process simple. Others list the types of screws that can be used to attach to the wall, while a few lists the types of screws that can be used.

Here’s how to place a baby monitor on the wall after deciding the camera’s location and angle.

• Choose where the holes will be made. A sheet with the holes spaced is included in your baby monitor kit. Make a mark where the screws will go in with it.
• Make the holes with a drill.
• In the holes, screw the base that came with your baby monitor.
• The cord should be secured to the wall.

2) On the furniture

If you don’t want to drill holes in the wall, there is a nice place to put your audio or video monitor, i.e., on a shelf.

It can be placed high on a dresser, drawer, or cupboard. With this option, you will have a lot of freedom and not have to drill the wall. You can move the baby unit around, reposition the monitor, and fine-tune the camera angle as needed.

A corner is the best position to put the shelf for a nice view. Simply set the monitor on the shelf, keeping in mind the good camera angle. Use a stand, a clip, or double-sided tape to keep it in place.

To put it in a particular position use:

• Stand
• On both sides cello tape
• Clip

Last but not least, keep the power cable out of reach.

3) On the crib

Mounting a baby monitor to a crib is the best way to receive clear video and audio.  When in close contact with a baby, the machine and the wires connecting it can create many threats. But few devices with internet connections are secure to put in the crib.

The processes of connecting a monitor to a child’s bed are as follows:

• Firstly, read and understand the instruction booklet that came with the machine.
• Select a place approximately at a distance of 3 feet from the child.
• Keep the wire away from the baby.  Cords on the edges or the baby’s interior are dangerous for the child.

What Is a Baby Monitor?

Young parents usually check on their children while sleeping in another room. It helps to check your infant while at work or doing tasks because of technological improvements.

A baby monitor, often known as a baby alarm, is a radio device that listens to sounds generated by a baby from a distance.

Baby monitors usually tell you when your baby needs you. Some are also used to record a baby’s respiration or heart rate if he or she has a medical condition. Prefer a good baby-proof baby monitor under your budget.

Tips to add a baby monitor

1. Find the perfect location and angle

Users must determine the best location and angle for placing the baby camera. A poorly installed baby monitor can lead to injury to the child.

Not only that it can hinder them from seeing and hearing the child. As a result, ensure that you experiment with numerous perspectives.

Till you discover one that covers what you need. When deciding where to attach the baby monitor, ensure no disruption or conflict with the audio and visual clarity.

When users have a newborn infant, it is best to position the baby monitor at a better angle. So that one can see the sleeping baby completely. However, one should lower the camera’s position when the child grows older.

So that one could watch the child moving. Keep the monitor at least f6,6ive to eight feet away from the infant. It is preferable to position the monitor as distant away as workable. Whilst maintaining proper vision and sound.

2. Figure out the mounting system

The majority of baby monitors arrive with a wall installation. Moreover, it also includes the essential parts for putting the baby monitor on the wall. There are also certain baby monitor versions.

That comes with an installed monitoring wall attachment. An easy and safe wall mounting mechanism is included. Furthermore, several baby monitors have a simpler installation technique.

It might be a little hole below the baby monitor. This scenario suggests attaching tape to the baby monitor’s safety. So, discover the baby sensor’s mounting mechanism.

3. Be mindful of its power source

Ensure there is an electrical socket nearby before actually installing the baby monitor. Since the baby monitor would require to be hooked into one. Make sure the baby monitor could access the socket as well.

When the monitor does not reach the socket, it should be moved, or an extension cable should be used. Utilizing an extension cable, on the other hand, is not advised for everybody. Since there are many instances in which babies begin to interact with it and wind it around objects.

4. Mount your baby monitor

You’re prepared to install the baby monitor when things appear to be in order. However, when users put the baby monitor on the wall.

Then, they should remember that it will be hard to remove the device once it has been installed. Therefore, before you install the baby monitor, see that everything is in its place.

5. Do some cable management.

This is especially critical when you attach the baby monitor. Along with the source of power with an extension wire. Stray cables are incredibly appealing to newborns to engage with.

As a result, it’s critical to connect all the cables to the wall. They may also cause injury to the child. As a result, ensure the wires are firmly secured.

6. Run the cables inside the wall and hide them

When you want the best alternative for securing the baby monitor’s connections. Then, routing the wires within the wall may be the finest choice. You only need to make two holes in the wall:

one at the back of the baby monitor and one below the monitor. Then, using fish tape, slip the baby monitor’s wires from above to the bottom of the baby monitor.

The wires could be hidden under any piece of furniture or a lengthy curtain. However, if your child is old enough to walk throughout the house and locate everything.

Then this is not the best solution for you. Since your infant would be able to locate the cords and begin interacting with them simply.

Advantages Of Having a Baby Monitor in the House

A baby monitor is important for your child’s security. It provides the necessary protection for your newborn and comfort and inner peace for you. Below is the list of advantages of baby monitors.

1. To see if the child is standing or lying down

Some parents believe that if the baby is sitting in the room, they should not enter so that she or he can self-soothe. In this situation, a baby monitor can help parents identify whether the infant is upright or lying in bed.

2. Watching Baby’s Sleep

Some newborns move around in their nurseries, but they don’t cry. If an audio monitor watches them, the parents will not be aware that the infant is restless. Thus, a video monitor might help parents see that their newborn baby is restless but not crying.

3. Parents’ desired Sleep

The parents could sleep for long periods without trying to check their child. Moreover, it makes them more active and enables them to look for their baby properly. Many video monitors even have motion sensors. It can alert parents about movements, even if they’re not loud.

4. Safety

It is a useful gadget for your kid. It allows parents to watch their children without trying to be present in the nursery.

Many kids fall while trying to stand up, hit their heads, or get out of their beds in the middle of the night. Parents can either avoid these injuries or learn about them and rush to comfort the infant.

5. Working as a Security and Nanny Cam

Working parents might use a video baby monitor as a nanny cam to ensure children get the right care. Besides, they perform the same function when placed on windows and other home entry points. Thus, performing the function of cameras. If you want your camera to perform both the features, you should opt for a high-quality nanny camera.

6. Taking a proper bath

Taking a bath when your child is sleeping is a difficult task. You must be quick and attentive all the time. However, while using a video baby monitor, you can watch the gadget to check what activity your baby is performing

With your video baby monitor, you can save priceless moments. Another unexpected benefit of a video baby monitor is the ability to record. It has the feature of saving priceless moments. Use the monitor to interact with kids.

You press the button, like a walkie-talkie, and you may talk to your child. It’s useful for relaxing your infant while he or she listens to your voice.

Without turning on the light, look around the room. Even if the child is sleeping in your bedroom, you will find a video monitor with night vision useful.

You can view your kid well without turning on the light if you use a video baby monitor with night vision.

Types Of Baby Monitors

Baby monitors are divided into three categories:

Audio monitors:

Any sounds your baby makes while resting or waking up are picked up by audio monitors.

Video monitors:

You can see your kid the entire time they are sleeping, thanks to video monitors. The video camera is placed on the wall of your baby’s nursery, and most video cameras have functions like:

• Zooming
• Tilting
• Night vision

This allows you to view your baby even when the lights are turned out. Wi-Fi monitors allow you to view and hear your baby through your smartphone or other digital devices. This indicates that you can watch your newborn baby even when you’re not at home.

Top 3 Baby Monitors

1. Nanit Pro Camera:

The Nanit Pro Smart Baby Monitor has it all—almost. It includes:

• Temperature level
• Audio and motion sensors
• A night lights
• An app that records sleep habits.

2. Baby sense 7 Camera Bundle

It comes with two pads that are placed under your child’s bed. Further, it allows you to monitor your baby’s movements without touching them.

3. Infant Optics DXR-8 Pro (Best non-Wi-Fi baby monitor):

It’s a basic, user-friendly video baby monitor with useful features like:

• Two-way audio
• A room-temperature sensor, and
• Remote pan-and-tilt.

It doesn’t connect to Wi-Fi. Thus, you can be sure that the video feed is private.

Where Should A Baby Monitor Not Be Placed?

• Avoid putting the monitor in a position where it will be exposed to water.
• Keep the baby monitor as close as possible to a power outlet. Extension cords will add to the dangers in your baby’s room.
• Make sure the unit isn’t right above your child’s head.
• Place the monitor on a firm shelf to avoid it falling over.

FAQs

Final Talk

There are moments in life when you need to know that your family is safe while you are away. A baby monitor can be used to fulfill this. A baby monitor is, without question, one of the best parental inventions ever. It can improve your baby’s safety and give you peace of mind if used correctly.

It can, however, pose a safety hazard if not handled appropriately. Many baby monitors provide more than enough functions to help you keep an eye on your child.