How To Make A Key Without Original Key Of A Lock?

Keys are a very essential part of safety. Whether it’s the key to your front door or it’s the key to your car. If you are a person of a forgetful mind and lose your keys very often then this article is for you. This article can be a helpful one if you want to get a key made for a lock without a key.

Method To Make Keys Without An Original Key

To make a key for a lock without a key you need to follow some steps. You also need some tools which are important for this.

Here we are going to discuss the steps by which you can get a lock without a key:

Tools:

• Soft Brass
• File

Materials: NA

For Car Lock :

In case you lose your car keys, what will you do? What will you do if you forget your car keys inside your car? Here we are going to tell you how to get a key for a car lock without a key.

Step 1: Know what type of car you have when you need a car key made

Different types of keys are designed for different purposes. So you need to be sure about your car before you are making a new key for your car. Because if you are not sure about it may lead to a solution that is irrelevant to the problem.

Step 2: Figure out what type of key you need

There are many different cars with different models. So before making a key you have to be sure about the type of key you need.

Step 3: Prove car ownership and have the proper information

Finally, you need to prove the car owner who’s keying you are looking for. It will help you to get a new key for your car.

For Door Lock:

If you want to make a key for a door lock without a key yourself you can follow the below steps. We are going to discuss how to get a key for a door lock without a key.

Tools required:

• Tweezers.
• Four in one screwdriver.
• Needle nose pliers.

You need to follow some steps to get a key for a door lock without a key.

Step 1: Remove the knob

You need to enter a site tool in the knob hole of the door. Then depress the knob clip. After that, you need to pull the knob off the door.

Step 2: Remove the cylinder

You need to push out the cylinder located to the back of the knob. So that the cylinder pops off the sleeve located to the knob. You then need to remove the cylinder.

Step 3: Remove the retainer ring

You can use the retainer ring tool to force off the thin retainer ring of the lock. Then use the ring tool against the retainer ring and pop it off the cylinder.

Step 4: Remove the cylinder plug from the cylinder

Now you need to pull out the cylinder cork from the cylinder. You need to enter the old key into the top of the cylinder and turn it in the right and left direction.

This part of the cylinder contains pins and springs. You need to remove the plug through the cylinder. This plug should be kept right to the cylinder until it is removed.

Don’t forget to keep the tension between the plug and the follower.

Step 5: Insert the pins and reassemble the lock

The old pins need to be dumped out. Enter the new keys. You need to use the small needle nose pillars or the tweezers. Finally, reverse the steps when the new pins are in. So that it reassembles the lock.

Methods For An Old Lock:

To make a new key for an old lock you have to follow some steps. Here we are going to discuss the steps.

• Screwdriver
• File or a bench grinder
• Screw

Step 1: Remove the lock

First, you need to loosen the screw which is set on one doorknob. You need to tighten it off the spindle. Then pull another knob and the spindle attached with it.

Cut around the faceplate and remove the screws. The screwdriver should be stuck around the spindle. The door lock should be popped out.

Step 2: Fit the tip to the keyhole

You have to find a blank key that has a tip diameter. So that it fits into the upper side of the keyhole.

Step 3: Fit the bit to the keyboard

In case the bit is longer than needed you can mark the lines where it hits in the bottom of the keyhole. Then remove extra metals from the lower part of the bit with a file or a bench grinder.

You need to uphold the bit into the keyholes on both sides of the lock.

Step 4: Fit the bit to the lock case

You need to examine the bit’s width. For that, you need to mark where the bit’s back and front parts are. You can trim it to turn it inside the case. You can also scrape those sides to match.

Step 5: Work the bolt

You need to remove the lock cover. Then enter the key into it from below. You can use your thumb so that you can hold the locking lever against the bolt.

Now turn the key. In case the bit hangs up with the bolt you can file a shallow notch in the lower part of the bit. The bit should turn easily in all directions.

Step 6: Notch the bit’s edge

Now look for the very little bumps inside the cover of the lock. Then you can pass the bit into the keyhole. You need to mark where the bit contacts the bumps.

Then enter the tip of the key from the other side and mark where the bumps hit the other side of the bit. Bundle it in a vice. You then need to file both ends.

Step 7: Test the turn

Enter the key into the keyhole from the lower part of the and twist the bit. When you turn the keys, notches should pass inside easily. Then, turn the key around.

You also need to test the notches in the other direction.

Step 8: Reassemble and replace

Finally, you need to flick out the lock’s case. Then sprinkle some grease on it. Then replace the cover and ensure that the key throws the bolt from each side.

How Much Does It Cost To Make A Key For A Lock?

The average price range of a locksmith can be around $97 to $215. This amount depends on the time you need a locksmith and also how efficient he is. A locksmith can also provide you with an electronic lock. If you are looking for a new car key with a transponder synced to your car’s security system will cost around $75 to $400.

If you need a key to open your house lock it will cost $150 for a locksmith. Elsewhere if you are using an electronic key it will cost around $150. If you want to change the single electronic lock it will cost $60.

Final Talk

In the above discussed, we discussed how to make a key for a door and a car lock without a key. We also discussed the steps by which you can make a new key for your old lock. The cost of making a new key was also a part of our discussion. If you find it difficult to handle multiple keys you should definitely get a good key cabinet for yourself. We tried to keep our article an informative one. We hope that this article will help you in doing such a process.