Nowadays, doorbells are necessity to enhance the security level, people are switching to video doorbells. It is better to have an idea of who is at the door before you open it.
If there is someone specious, then you can prepare yourself and take some security measures on time. So, if It’s allowed in your apartment and you are willing to install a Ring video doorbell on the door, this article is for you. You will find a detailed step-by-step explanation of its installation.
How to Physically Install Your Ring Video Doorbell
Many people think that the installation of a doorbell is a technical job. It can only done by the technician. In case of video doorbells, they don’t even try.
But it is not as difficult as you are thinking. You can do it all by yourself and enhance the level of your house security.
You might not believe it, but the whole task can be finished within 15-20 minutes. All you need is some tools and right set of instructions on how and where to position it. Generally, the tools come with the package.
Apart from that, you need a drilling machine and a screwdriver. Now go through these steps and find the detailed explanation later.
Step 1: Take out the existing doorbell
The first step before you start with the installation process is to take out the old one. The Ring Video Doorbell needs to be installed fresh.
So, remove the existing one. You can do that simply by removing the screws with a screwdriver.
Before doing that, turn off the power so that you can avoid any electric supply.
Step 2: Lining & Marking
The next step is to start with the installation of the new doorbell. Rather than going straight for the installation, do some marking. Mark the area where you want to put the bell.
You can choose to place it where was the existing one. But marking is always a good idea. The size of the doorbells could be different. The placement of screws could be different.
For doing the lining and marking, use the level tool. You will find that in the installation kit itself.
Put the doorbell at the desired surface, then mark the areas one by one.
Step 3: Drill Hole
Now comes the heavy part. Take the drilling machine and start drilling holes where you had the marking. Do it with ease. After going a little far, check the depth of the hole.
It should not too small or very deep. To get an idea about the depth, use a screw. Put the screw inside the hole and see how far it goes.
Finish with the drilling part and clean the nearby surface.
Step 4: Wiring
Here in this part, you need to first take out the level tool. Let’s just the mounting bracket be there. Now, join the wiring of the doorbell with the terminal screws.
Terminal screws are placed at the same mounting bracket. During this part, the power should be off. For extra safety, you can wear safety gloves.
Step 5: Placement of Ring Doorbell
Now, you need to put the video doorbell over the mounting bracket. Keep it there and check if it fits right in that space. Before putting the screws, check the visuals.
See whether the view of the doorbell is capturing fine or not. It is good to get these checked first. This way, you can ensure that the angle and everything are fine.
Step 6: Tighten the screws
When you are happy with the positioning of the video doorbell, tighten the screws. To do that, take a screwdriver and rotate it over the screws.
Place all of them one by one and finish the task. Once again, try testing the doorbell and try moving it a little. This is to check if the screws are tightened properly or not.
Now you can connect to the video doorbell and use it normally. You have just upgraded your house’s security level. Video doorbells work very efficiently. You can control them through mobile apps as well.
You can change the settings as per your preferences. So, the control of the doorbell is literally in your hands.
Final Talk
After going through the installation process of the video doorbell, you know how easy it is. Just in 15-20 minutes, you can have it at your door. So, no need to call the technician for it. After you have install the video doorbell, install the app as well.
Though the functions can be performed manually. Mobile applications make it convenient for you. You don’t have to go to the doorbell for some minor change in the settings. Technology is there to make your life comfortable. So, make the most of it.
Leave a Reply