The purpose of a grab bar is to hold on to the weight put on it. At the same time, you are standing, changing the seats of a wheelchair to a bath chair. Slipping, holding, or grabbing it while falling, and it has to be stuck in a place that is not fragile. here, we have a complete guide to install a grab in a fibreglass shower.
How To Install A Grab Bar In A Fiberglass Shower?
Quick Navigation
You don’t want to hold onto something for balancing and realize that it shatters into pieces. Read through to get your hack packs and work done with ease.
Total Time: 30 minutes
Step 1 – Know the place
It is advisable to consider everyone’s height and weight in the family. Then decide where to hang your grab bar for ease of use. Everyone who will use that part of the house should be okay with where the installation will happen.
Step 2 – Choose bar
Choosing the safety bar is an essential step you should focus on before installation. Different needs require different types of bars, and it only depends on you. The surface you want it to be installed on is a factor you should consider too. For example, some unique bars and tools are made only for the fibreglass-based surface. Consider buying these for your place.Â
Step 3 – Measure
Take a measuring tape and note the measurements. Consider the height and equal distance from the corners of the room. Make notable signs on the places you want to put it. These signs that you marked will now guide you where to put the hole.
Step 4 – Drill
The marks you make will help you to make holes at the right place. You can now create 2 inches of a hole without getting confused.Â
Step 5: Gauge the length of the space from the stud to the shower of the top
Cut the spacers now, as needed using any sharp object. Furthermore last, it would help if you bore a pilot opening with a 3-inch boring apparatus into each stud.
Step 6:Â Put adhesive
Add adhesive in the handles of grab bars for a substantial holding.
Step 7:Â Bolt up the bars
Don’t forget to put on weight. Please give it a quick check before relying on it in emergencies.Â
Tools:
- GRAB BARS (As Per Quality Standards)
- Mounting Brackets Bolts
- Drill Machine
- Hole Saw ( 2 INCH) Measuring Tape
- Knife
- Pencil/Marker
- Silicone Caulk
- Stud Finder
How To Install A Grab Bar In A Fiberglass Shower Stall?
- The placement should always be in a solid place to handle a good amount of weight.
- Neglect fragile areas, as they will break when the applied force on them—denting your body and pocket.
- Near the shower door- An entrance bar should go vertically.
- Sidewalls, on the other hand, should have the horizontal bar installed. Place it hanging up the floor for more than 30inchs
- The vertical bar should be near the faucet handles, making a place in the end wall.
- One may also consider having the vertical bar opposite the faucet. For safety and ergonomic reasons
- Many people have used the shower stall replacement to a new location to comply with these points. So, if you are wondering if you cannot change your already built shower stall, this point was for you.
How To Install A Grab Bar In A Fiberglass Existing Shower?
Consider what is mentioned and make them factors to determine the process ahead. Being no concrete but a fibreglass wall is a problem some people face. It is fragile and requires careful installation. Measure the distance from the back wall to shower fibreglass. Then, fix Spacer using the manual of sizes according to length.
After this, use a washer and bolt and drill it inside the gap. Cover it with a mounting plate and use adhesive along with a screwing technique. Do the same for the other side and test the bar (You can also screw and fix the bar on the wall with glue after the process.), so make sure you choose a durable, high-quality security bar for the toilet door and shower.
Do Suction Grab Bars Work On Fiberglass?
Suction bars use a design of safety handle to prevent individuals from slipping and falling or harming themselves while using their toilets or baths. It has suction cups that keep the hold firmly in place and make the product easy to grab.
The arm of this suction handle is versatile to operate generates powerful suction (reasonable tensile force). The grasp bar is also lightweight and portable; release the lever to remove the handle. Installation can take place on any flat surface. It can be done without a professional. What More? It requires no additional tools as well.
It is an excellent option for fibreglass. The reasons are listed below:
- Installation does not necessitate the use of screws or drilling equipment.
- Grab a bar that is versatile, lightweight, and portable.
- The suction handle makes it simple to set up and take down on any smooth surface.
- Handling is simple.
- The vacuum arm generates strong suction.
- Exceptional craftsmanship
- Material of excellent grade
How Do You Get Suction Cups To Stick In The Shower?
Suction cups are best of all if you don’t want holes. We’ll teach you how to properly adhere suction cups to tiled shower walls in this segment. Fibreglass is such an example. These are smooth and non-porous surfaces that suction cups can adhere to.
Crucial Steps are listed below:
A. Select the Appropriate Suction Cup Location
To ensure that the suction cups adhere well to the shower tile, begin by selecting a suitable surface. Clean, level and smooth surfaces work best for suction cups. You should not use them around the shower tile’s edges. Likewise, tile grout and curved or textured surfaces should be avoided.
B. Check to see if the surface is clean
Ensure the thorough cleaning of the shower wall before applying the suction cup. Remove any filth, dust, or debris that could interfere with the cup’s adhesion to the tile’s surface. To remove any mineral or waste hanging is essential. Wash your tiles. Don’t forget to rinse and clean the surface with a lint-free towel. Then, to eliminate any filth residue, wipe the surface with rubbing alcohol.
C. Make sure the suction cups are clean as well
Cleaning the suction cup is also necessary. Shake out the excess water after rinsing the cup’s interior with warm water. Those water droplets can prevent air pockets from forming, resulting in a better seal between the cups and the tile. Warm water will also help soften the cup material, making it easier to press down.
D. Use Consistent Pressure
Finally, place the cup on the freshly cleaned tile surface. No bubbles are to be formed. Try putting hard pressure against it. Improve suction by following a few basic guidelines. Spritz the suction cup with water. A small amount of water can aid in the suction cup’s grip.
Then, on the cup, apply petroleum jelly. Put jelly on the cups Do this to create a thin, invisible coating that can help with suction. Use a small amount, or the suction cup will slide off. Keep an eye on the temperature. If you want the suction cups to be more flexible, put them up while it’s a little warmer. Rinse-Wash the cups
Final Talk
Aside from understanding how to install a grab bar, you also need to know the guidelines for selecting a grab bar. They also come in various sizes.. When carrying enormous loads, fibreglass is flexible and can bend. This method causes the glass to crack. It is preferable to do this to avoid water leakage. Choose a secure location. Placing grab bars in your bathroom can help. Just make sure you choose the best security bar for a bathroom. It reduces the likelihood of someone falling or slipping.
For the safest and most secure way to put a grab bar in a fiberglass shower use The Solid Mount made by Back to Basics.