It’s common to lose or forget the keys or forgot the combination of a lock. In that case, to open the lock you can use a hammer and break the lock. But, it is necessary to break it without damaging the door. We have enlisted some simple steps to break a lock with a hammer.
Methods To Break A Lock With A Hammer:
Quick Navigation
There are a few things you’ll need before you can shatter the lock with a hammer. You don’t have to worry because the materials you need are easily accessible. They might already be in your toolbox.
If you don’t have them, you can buy them at hardware stores or borrow them from a friend or neighbour. There are also some alternatives in case you can’t find a hammer.
Stay tuned with us to know more about the process.
STEP 1: Get Your Hammer Ready And Put On Your Gloves And Eyewear
To avoid any accidents or injuries while doing each process. Make sure you have the appropriate tools and clothing. While doing the instruction you might face some dangers. You can hit your hand by accident or metal particles can also hurt your eyes.
If you don’t have a hammer, a screwdriver or other hard object will serve. Yet, if you don’t have a solid hold on the tools, aiming will be tough. Use the items required for this tutorial as much as possible.
STEP 2: Pull The Shackle Loop With Your Fingers To Produce Tension
By putting your fingers in the shackle’s loop, you can apply pressure on the lock. Pull the shackle from the padlock’s point with enough power. You will be able to properly position the pins inside the lock using this technique.
As a reminder, you must remove all excess leeway of the shackle. If you don’t fulfil this, no matter how hard you try, you won’t be able to unlock the lock. Also, avoid putting your fingers on the padlock’s body to avoid injury.
STEP 3: Hit The Side Of The Padlock Using A Hammer Again And Again
Until you are successful at bumping the lock open. Pound the fixed end of the shackle where the pins are placed to successfully open the lock.
Strikes must be brief and swift. Continue pounding until the pins are disengaged and the lock is opened. Avoid using too much force on the lock, since this will either destroy the lock or cause you to injure yourself.
STEP 4: If The Lock Is Still Functional, Reuse It
You can still use it as long as the pins within the lock are not damaged. Check the lock and see if it is in good working condition or not. It must be securely locked. Yet, if it can no longer be used to lock, you should toss it in the trash and get a new one to safeguard your safety.
How To Break Padlock?
It may be smaller than a standard door lock or a mortise patio door lock, but it performs the same duties. So get a good motorized door lock on residential property.
You can use it to lock a suitcase, locker, or box; you’ll get a key no matter what you lock or what size you buy. Keep the key safe; otherwise, someone might steal it, or you might have to break the padlock.
The habit of guarding a locker or a vault, besides, began throughout Europe. (probably in Rome and Greece).
If you want to lock and secure your bike, you should get a padlock; make sure it’s a strong one that won’t break easily.
To break a padlock with a hammer, follow these steps. A hammer can be used in two ways; let’s look at how to break a padlock with one.
List Of Things You Need
- Bump hammer
- FX Gloves
- Protection goggles
- Gas compressor
- Screwdriver
- A Pair of wrenches
METHOD 1: Bump Your Padlock With Your Hammer Or Similar Tool
If your lock is made of sturdy metal, get a strong hammer. Your goal should be to unlock the shackle. Not to permanently disable the lock. Hold the U-shaped shackle first to provide enough tension. For example, two fingers can be placed there.
Keep one finger on the shackle and the other on the top of the lock; don’t put your hands on the body. You should not be holding the lock because you will be tapping its body.
Bring one of its sides out and begin tapping it. You should not be gripping the lock because you will be tapping its body.
Take one side of the shackle out and begin tapping it with the hammer gently until the shackle unlocks. Yet, while your issue is temporarily remedied.
You should not utilize it until you get a key. As smashing does not break the lock during unlocking shackles.
You can utilize it after creating 1-2 replacement keys. This is the simplest way because it does not lead to a long delay and only requires the use of a hammer.
METHOD 2: Using A Gas Compressor And A Hammer
Bring a hammer to break the lock, as well as a gas can with a nozzle; the compressor will serve as a chiller. The difluoromethane renders the lock brittle, making it ready to break. Insert the nozzle over the keyhole point and spray for at least 20-25 seconds.
Before using the hammer, make sure the lock is sufficiently cold and brittle. Remember that the lock should be set to -13°F regardless of the room temperature. Begin pounding the padlock in the centre with medium pressure and continue to do so until it snaps.
It didn’t take too long to complete the assignment. The lock will no doubt break after a few encounters. When banging, be careful not to let the lock move. Instead, grasp it with its side and ensure the hammer hits the middle.
That is not the way to use it if you want to open a padlock without damaging it. This approach is likewise simple to use and inexpensive. So you can use it as a substitute for the first. Now that you learned how to crack a padlock with a hammer, go for the easy alternative.
You must obey every step and ensure that you are not injuring yourself. Regardless of which treatment you are using. Yet, losing and breaking the key is not a good habit to get into. You should not rely on hammers.
My co-worker once broke his nails while pounding a lock; you don’t want that to happen, right? Every difficulty, though, has a cure. So, learn about the treatments and solve them out using the advice.
METHOD 3: Using A Pair Of Wrenches To Break A Padlock
Take two open-ended wrenches and put them together. Any type of wrench will suffice. The larger the head, the better the wrenches will operate. Because they will be able to exert greater pressure on the lock.
Ensure that equal force is transferred to both sides of the shackle. Otherwise, the U-shaped metal clasp fastens the lock. Both wrenches should be near the same size. Over each side of the shackle, hook the open ends of the wrenches.
Bring the handles as close together as possible once the wrenches are in place. The two internal arms of the wrench heads should butt up against each other as a result of this. Try to put the wrenches in the middle of the shackle’s vertical shafts.
When you apply pressure to them, they may slip off if they’re too high or too low. Give the wrenches’ handles a short squeeze before attempting to break the lock.
To ensure that they don’t slip, shift, or lose their grasp on one another. Twist the wrench handles together until the shackle breaks in half.
As tight as you can, squeeze the handles together toward your midline. Be patient and don’t give up if it takes a lot of muscular effort to snap the shackle.
It will break right down the middle when it eventually gives way. It might help to tighten your hold on the handles. So that you’re pressing with your flat palms rather than the edges of your fingers.
Tip: If the arms of a large lock or a tiny set of wrenches don’t exactly contact. Build a makeshift shim out of a folded piece of paper or similar material and slip it between them.
To remove the lock, fish out both parts of the shackle. All you have to do now is pull out the broken parts after successfully snapping the shackle. Because the locking mechanisms inside the lock will still trap the end.
You may have to twist or jiggle them a few times to get them to come free. If the lock you’re breaking has a plastic body, the shackle may come free in one piece.
If you’ve squeezed the shackle with all your might and it still won’t budge. Save your energy and attempt a different tactic. Such as a few well-placed hammer whacks.
Is It Not Legal To Break A Lock With A Hammer?
You might wonder if it is allowed to break a lock with a hammer or not. Well, the answer depends upon the situation.
If you are the owner of the locked property, then definitely you can break a lock with a hammer. But if you are not the owner of a particular property, then you are not at all allowed to break a lock.
Never try to pick a lock that you don’t possess. Trying to interfere with a lock with the goal of robbing. or getting access to someone else’s property is illegal. You could face legal consequences.
In many countries, lock-breaking equipment is easily available. It is lawful to have these tools as they don’t use them for criminal attempts. While in a few Asian countries, such as Japan, the rule is different.
It is unlawful for most of the population to have lock-breaking tools.
If a person was caught with any lock-breaking tools. They will force a punishment of a 500,000 yen fine and captivity of One-year.
Inexpensive locks made of plastic rather than metal are easier to break. Take the time to learn about the basic design and operation of several types of locks. The more information you get about the problem, the more likely you are to find a solution.
Can Hammer Damage A Lock While Breaking It?
This could happen in one of two ways. One is that it pulls the hinges and their screws out of the wood, breaking them off and allowing the door or gate to close.
The other is a hammer strike on some combination locks. Such those supplied for use in school lockers, can cause them to unlock.
Safety gadgets are required to break the lock with a hammer. One should always take care of their safety while performing the risky task. As we are dealing with hammers and other sharp objects.
It can always accidentally hurt our hands or eyes. So we should learn how to stay safe while doing the job.
1. Gloves FX
You can protect yourself by wearing hammer-proof gloves. Its construction makes it resistant to hammer attacks. The exterior layer can be damaged. But underneath it is a thermoplastic layer that protects the hands. Only your fingers can be protected.
The different kinds of gloves you can choose from are leather gloves and carbon fibre gloves. Leather gloves have the advantage of being able to provide a good grip. While knives made of Kevlar are thick enough to withstand cuts and abrasions.
Select the appropriate glove size. Make certain that they are a perfect fit for your hands. Gloves that are too big or too little can make you feel uneasy while you’re doing the whole thing.
2. Protective Goggles
You must protect your sight from any flying items. A little particle might cause damage to your eyes and briefly harm your eyesight. Depending on your environment and personal preference. You can choose from a variety of goggles.
You can utilize a set of power tool goggles because they have thick, big lenses that are not easy to break. There is also an indentation on the bridge of the nose. It also comes with a comfortable headband. You can tighten and secure around your head.
Anti-fog technology is also included in the goggles. You can also use a pair of welding goggles if you don’t have any power tool goggles. It has a design that will keep any particles out of your eyes.
Welding goggles, unlike power tool goggles, feature separate lenses with thick edges. Because the goggles contain air vents, you won’t have to worry about fogging.
A face shield is the final choice. Yet, make sure it has a thick cover and is a perfect fit for your head. Aside from that, the cover should be transparent enough to avoid striking your hands.
Is There Any Other Way To Open The Lock Without Breaking It?
Some locks cannot be unlocked without destroying them. That is what a high-security lock is for. Others, depending on the type of lock and one’s skill and expertise, are quite simple to circumvent.
Well, you may remove a padlock with anything other than a hammer. For example, a screwdriver or a cordless wrench can be useful. Observe how to use a screwdriver to remove a padlock.
Final Talk
Follow these steps to break a lock using a hammer and screwdriver. If you lose your key or forget your code, you don’t have to hire a locksmith to get into your house. If you found this post useful, please share it with your friends. So that they can learn how to break a padlock with a hammer as well. You are also welcome to leave a comment below to share your thoughts on the instruction.
Leave a Reply