How To Add Lock To Cabinet?

If you have to keep your important documents in the cabinet and want it to be secured from theft or scam then cabinet lock is a must requirement. It helps to increase the security of your belongings. Here in this article we would be sharing very easy steps to add lock to cabinet in less time.

Methods To Install Lock To Cabinet

If you are thinking of installing cabinet locks all by yourself then don’t worry you can. There are various types of locks that are specifically designed for cabinets. They all have different roles and offer different features. You can select any of the locks which suit your needs. There is some equipment you will need in the same process of installation. These tools can be easily found in homes or nearby hardware stores.

Here let’s get started with the very detailed guide for installing locks on cabinet doors. We have also listed some tools along with that.

A. Installing Push-Down Cupboard Door Lock

This category of cabinet lock is really good. They are the latest in technology. It’s making material is long-lasting. Opening and operating them is very straightforward and easy. They don’t need a key lock system but can be closed by just pressing a button. They are called pushdown cabinets for the reason as y is used that way.

Let us give you a brief account of the installation of push-down doors in a step-by-step manner.

Step 1: Analyze the width of the cabinet’s door when it opens
You have to measure the size of the door when it opens. Just open the door fully to go outwards. Note the outset of the interior cabinet opening on the outer cabinet door. You have to make the required hole in this exact place.

Step 2: Put the cabinet latch
You will need to fix the latch on top of the door. The latch should be in the pretense of the hinge. The lock’s notch should lie far below the cabinet. This is important as you will need a slot to press down and consequently to pull. This way the door will open and close.

Step 3: Make Marks and drill the holes
You can use a pencil or anything for marking. You have to take all the care so that they fit in the perfect place. The important point is to drill holes to the marked point. You can consider any guiding videos or guides provided by the manufacturer. This will assist you to do your work with accuracy if you have any difficulty. This enables the screws to clasp the lock to the cabinet.

Step 4: Screw
Get the cabinet lock in the initial position, you have set it on the level of the screw holes. You can employ a screwdriver to grip the lock. You have to make the screw tight enough and too much. Finally, you are all ready to install the lock on the cabinet.

B.

Magnetic locks are strong latching forces. Placing them on your cabinet will surely be an ideal way for your safety from thieves. latches of this type work by attaching a latch to the inside of the cabinet. It will remain sealed until you put the magnet-based key from the exterior.

They also come with every required equipment. Therefore, you don’t need anything to buy.

Step 1: Clear surface
If you have some alcohol you can make it use to wipe. This will remove any dust or surface stains. This step is for the adhesive to work properly. Be sure that the breadth of the entrance is below 1.5 inches.

Step 2: Scrape off the 3M glue cover
You need to scrape the 3M glue cover from the rift indicated in the latch. This is known as the centre groove. The middle groove should face you, make it while putting the lock on the cabinet. The lock should also be a half-inch off from the adjacent cabinet. Then you will have to mark a line on the top of the door, the line should be in front of the centre groove. It will be just the clasp is affixed.

Step 3: Rotate to the latch
Again, put the 3M glue cover near a half-inch under the drawn line. You have to align it in the centre of the line. You have to stick it tightly.

Step 4: Take these remarks
You can even switch off the lock-in possibility if you don’t want it. You can turn it on whenever you need. For the basis of the key, consider sticking it at a high. The children this way will not be able to reach it.

We advise you to clean the exterior before attaching it. This will help ensure stickiness. Let the glue dry naturally. This will eventually minimize the effect for 24 hours. Afterwards, you can shut the closet with the magnetic key.

C. Installing Gliding Cabinet Door Lock

This kind of cabinet door latch is perfect for cupboard doors that shut as well as open in the center. It is not applicable for those who keep knobs. This type of lock works very well for security purposes. This lock comprises two parts. Single part accommodates on the doorcase and the other on the door.

Step 1: Fix all the work
Shut down the cabinets so they come up with the level. Then, you are required to just shove the two buttons. This will segregate the clasp from the upper portion of the door lock.

Step 2: connect the lock
Slide the booth’s upper space through the closet’s two hinges. The lock’s deepest end will droop underneath the grips. Lastly, the lock will tighten, preventing the cabinets from moving.

Step 3: Check the outcome
You have to tighten cabinet doors. Slip the clasp on the closet handle hoops. Do it until the hinges stop moving. You will require to hold both buttons at the exact time and slide to the opening space.

FAQ

1. How Will You Put In A Cabinet Lock By Not Using Drill?

You can install locks on your cabinet door without drilling. The easiest and most convincing way is to use a rubber band to fasten them. Using unique cabinet cord locks for the kitchen is another wonderful method.

You can install locks by either of these methods without using drills. They are baby-proof. You don’t need to worry about their installation either. They are very simple to install.

2. Do Magnetic Locks Work On Drawers?

Yes, you can use a Magnetic lock for your drawer. You’re only required to make sure that the drawer has a perfect surface. The surface is perfect means that it should be smooth and clear. So, get a good magnetic drawer lock for your cabinet.

In this manner, you will not confront any unnecessary friction when they slide. You can install magnetic locks on any type of drawer as you desire. You can install them on top, side, or even at the ends.

Final Talk

In this section, we saw a detailed explanation for fixing locks on your cabinet doors. The method for the installation of each type of lock varies. The tools compelled for this are effortlessly available at home. This method is for all DIY tasks. You can do this method without professional help. Or you can even lock a cabinet without a lock. We wish we benefited you with this article. Moreover to be safe make sure you always have an easily lockable recessed medical cabinet at your office and home.