How Many Zones Can The Ecobee Thermostat Control?

This is for you if you need to regulate the temperature in different sections of your house according to your desired settings.

Ecobee thermostat is a famous brand that provides the solution you are searching for. Here, we have given a detailed guide on How many zones the Ecobee thermostat control.

Can Ecobee Thermostat Control More Than One Zone?

Quick Navigation

Ecobee Thermostat Controlling More Than One Zone

There are numerous reasons for needing to create different zones in your house. The group of these created zones can enable you to obtain the most use out of your Ecobee smart thermostat.

This also gives you more control over the temperature regulations in your home. The Ecobee thermostat is a great appliance that makes up 16 different zones to regulate your household temperature.

This implies that up to 16 different rooms in your house can work on a single Wi-Fi network. They all can simultaneously be controlled straight from your smartphone.

This feature is a beneficial feature that Ecobee smart thermostat offers. This saves users from any unnecessary work of getting multiple thermostats for their homes.

Not only this, but the Ecobee Smart Sensor or a room sensor can also pair up with up to 32 devices to the Ecobee. This feature helps us get a much more accurate estimated value of the temperature of different places.

Let us know more about working the Ecobee thermostats and sensors with zones in your house.

How many Ecobee thermostats can I have?

To be straightforward, it mainly relies on your zoning in the home. If your home is a flat of double stories, you would require dual Ecobee thermostats for both of your stories.

You should consider the range of each sensor to the extent of your house. The sensors must register every major difference in temperatures in your home.

This is crucial for keeping a balanced temperature throughout your home when thermostats are utilized in a 1-story building or studio apartment.

You need one to operate the HVAC system. You need to consider some things for utilizing a thermostat in a full-fledged home.

These are particularly:

The type of house you have is a small apartment or an expanded one.
Then you should also see the number of stories of a building if it has more than one.
Lastly, you need to focus on your house’s different hot and cold zones, if it has any.

Can one Ecobee control multiple zones?

Ecobee smart thermostats monitor every zone of the cooling and heating system. For monitoring every zone without this feature, you will require an Ecobee in every zone. You should get the best eco bee for multiple zones for your house.

If your house has many cooling or heating zones, shifting to Ecobee is a great option. Then you must try logging into the official Ecobee website to set up different Ecobee. For example, you would require a group to work jointly and not act opposite.

Can Ecobee control two furnaces?

Thermostats that are in zoned systems can regulate similar cooling and heating systems. This is so that each thermostat can control its system.

When two thermostats control only one system, your home is divided into different zones. This is done by utilizing dampers throughout the house.

Also, you can utilize many thermostat groups along with the Ecobee thermostat. You can wire multiple thermostats to a single HVAC unit.

Whether it is a furnace or a boiler that you are using, you can govern the heat of your house. Even if it is ventilation or air conditioner unit, many Ecobee smart thermostats can be connected.

How Do You Use Ecobee With Multiple Zones?

You can make use of Ecobee to regulate multiple zones in your house. The process is not at all complicated. And it is much more convenient than employing two conventional thermostats.

The setup is fairly straightforward and will also give you more control. This is done by utilizing the standing wiring in your household.

Let us look at the following steps you can do to set up your Ecobee with multiple zones quickly:

1. Remove the Old Thermostats

This should be done because you will require an Ecobee for every zone in your home. You should buy as many as possible to replace the thermostats in different places.

You should eliminate all the old thermostats. You can use the enclosed stickers to tag each wire to identify.

2. Introduce the Power Extender Kit if you need it.

If the old thermostat uses a standard wire (C-wire), you must set the power extender kit (PEK). You can do this at the zone controller, which is generally near the cooling or furnace system.

Go to the zone control panel and look for the wires for the zone where you are installing an Ecobee.

Remove all four thermostat cables from the panel and connect them to the PEK unit. Next, attach the PEK units with a control board involving the anchorage for the C-wire.

3. Organize the Wall Mount

Now, you should go where the thermostat was initially installed and remove it with the help of the Ecobee unit. Utilize the enclosed bolts to maintain the plate to the sidewall. Also, then push each tagged wire into the right port.

4. Set Up your Ecobee Thermostat

Utilize the display and application to install the thermostat. Confirm that you have named every unit correctly. This is important for applying adequate settings for them through the app.

Moreover, you have the option to pair any remote. It can be any sensor you possess. Pair it with the corresponding Ecobee for that particular zone.

5. Organize Multiple Zones via the Website

First, sign in to the Website by entering the same credentials needed for the app. See the upper right-hand space and select the option “thermostat groups.”

Next, you need to select the setting you like to share with the organized group of Ecobee in your home.

Doing so will confirm that the Ecobee in every zone works. You can check if they are compatible with simultaneous heating and cooling with a humidity sensor.