A home garage door opener works simply by opening and closing your garage door. But have you ever wondered how garage door openers work?
What is the maths behind its functioning? There’s no doubt that garage door openers make our lives easier. We use them multiple times a day without giving them a second thought.
Today, we will learn about the mechanics behind garage door openers. You might be surprised by how a garage door opener works.
Understanding How The Electric Garage Door Opener Works
A garage door holds a very huge responsibility in protecting your car. Nowadays, people have those automatic garage door openers.
You can open and close the door with the help of a remote. This saves a lot of human effort. As per its size, you must know that some heavy technology is behind its operation.
Well! A lot of people think like that. But in reality, this is not the scenario. There is an effortless mechanism that plays the role. You will learn about that through the steps holding the explanation.
1. A garage door system may seem complicated
As mentioned earlier that the size might confuse people. It might look a little complex, but it is not. There is a straightforward thing behind all that. Once you go through the process, it will be easier for you to understand.
2. But it’s just a radio transmission system
Alright, so here it goes. The actual thing holding the whole functioning of the garage door opener is an RTS. RTS is the radio transmission system.
Antennas support the mechanism. Here, electric current is converted into electromagnetic waves. These waves travel through a medium like space or air. To see how it works or if it’s working properly or not. You can get a good electromagnetic wave detector for research purposes.
So, whenever the user presses the button on the garage door, the transmission starts—first, the electric current changes. Then the newly formed electromagnetic waves float ahead.
3. The transmitter sends a code to the receiver
This works in a two-way direction. A code is sent to the receiver after the button is pressed. This happens through the electromagnetic waves that are explained earlier.
4. Which is tuned to the same frequency as the transmitter
Once the code is received, the same kind of signal is sent back, known as frequency. The signal works as a transmitter in opening or closing the door.
Whenever a command is given by pressing the button, this process follows. And that’s how a garage door opener works. You see, it wasn’t that complicated.
Why does the garage door opener not work?
There could be plenty of reasons behind the non-performance of the garage door opener. Have a look at some of those to get some ideas:
Reason 1: Low Batteries
This one is the most common reason for any battery-operated device. This can happen with the garage door opener too.
If yours is the one that runs on batteries, then low batteries could be a problem. The door opener won’t work in such a situation. To check that, you can have a look at the LED.
If it doesn’t blink, that means the batteries are dead. You need to replace those old ones with a fresh pair. Then your opener would continue to work like before.
Reason 2: Wiring Malfunction
There could be a possibility that some wire is broken or damaged. Look for the open cables first. If everything looks OK, then reach for the internal part.
You might need to loosen up some screws for that. After that, find that damaged wire and replace it. You can call the technician for this part as well. After fixing this issue, check if the door works or not.
Reason 3: Minor bugs
There could be more mirror issues like bugs hampers the door’s functioning. In such cases, you may go for resetting.
Yes! Resetting the garage door opener can fix this issue. To do that, remove all the wires connected to the door. Now, wait for some time and then put back the cables.
Then try to test it to see if that worked. This helps in many cases when a device stops working.
Reason 4: Technical damage
Step back if you have looked upon all the fundamental issues, and everything looks fine. It is something beyond your control.
Something that you can’t figure out on your own. In such cases, you may call for technical help and get your door checked.
It is advisable to do it as soon as you notice the problem. So we can take that corrective measures on time. Otherwise, you will have your house’s security at stake. Make sure you have some heavy-duty torsion springs installed at your garage door.
So, some of the reasons generally cause problems with the door opener. You may check upon these before getting external help. You can have an easily operated Z wave security garage door opener to save time.
So, if it is something minor, you can fix it yourself. This will save your time and your money as well. Moreover, do install an entryway alarm sensor at your garage entry.
Final Talk
So, today you learned something new. It is good to know things you use in your daily lives. Things might look a little too much, but it is very simple.
You need the zeal to learn and explore. You also learned about some of the reasons that cause the door to stop working. After getting to know those, you can check up on them and fix them on time. A smart garage door lock is a must for a busy family to maximize garage safety.
It would be best if you had a general idea about your things. So, keep on discovering new things around you. It will make you smarter.
Leave a Reply