Ready To Connect When Network Quality Improves: How To Fix

The internet plays an integral part in our life. It can be irritating if the internet is not available. This can cause various essential work to be delayed. Sometimes, even after fixing the internet, It says ready to connect when Network quality improves, if you are experiencing the same, here’s how to fix it.

Fix Ready To Connect When Network Quality Improves

This problem occurs when the device thinks the connection it is trying to join does not have a signal. This issue can arise when your smartphone is linked to or attempt to enter a Wi-Fi connection when users verify their Wi-Fi connectivity in the Notification area or setting. You’ll notice the error text.

The condition may change from Connected to the error text. It might cause numerous connection problems. The major cause of this error could be a bad network connection.

Therefore, one must try some of the simple solutions given here to fix it:

Step 1: Try Reconnecting

Fix the problem by:
● disconnecting to the Wi-Fi connection
● reconnecting to the Wi-Fi connection.
Any data associated with the Wi-Fi will be removed if the connection is forgotten. To re-join, you’ll have to reconnect to the internet and input the pin again.

If you have to forget a WIFI connection, then follow these steps:
● Click the Setting app on your smartphone.
● Press and click the Wi-Fi connection you’re experiencing trouble with.
● Select Forget network from the menu with dropdown options.
● The Wi-Fi connection would be immediately disconnected from one’s device.
● Attempt to reconnect to the Wi-Fi connection by typing the pin again.

Step 2: Reboot The Router

Rebooting gadgets can assist in the removal of a wide variety of faults and speed problems.
● First and foremost, remove the power connection.
● Then, before actually putting it again in, probably pause for 10 seconds.
● Now, you must wait about twenty seconds for it to re-establish the link. This might take slightly more time than others.
● If nothing else works at that stage, you’ll have to perform a similar procedure using the DSL modem.
● If the Wi-Fi network continues to be ineffective on any computer or gadget in the home.
● Then, one should attempt rebooting their DSL modem.

Step 3: Contact Support

However, the next obvious move is to approach the customer care group as it applies to this case.
One’s gadget might have experienced a connection issue with any network.

Further, this can happen in a rare proportion of circumstances. Before taking it for repair, reconnect it to many multiple to which users have access. Then again, there’s nothing better than agreeing to pay for costly fixes that weren’t required.

Apart from it, some other alternative steps can help users to fix the issue. They are listed below:

Step 4; Install a Wi-Fi Repeater

A true network quality problem could sometimes create this problem. Although obtaining a good signal on your smartphone is rather simple.

Buy a Wi-Fi repeater and place it close to where you’re facing difficulty connecting.Decent ones like the TP-Link AC1200 are frequently discounted at online sites. It also operates well with many routers.

Establish the repeater for the Wi-Fi connection via the pairing method. Then reconnect your device to the connection.Verify the connection’s network activity to check whether the problem persists.

Step 5: Switch to a different Wi-Fi channel.

Wi-Fi employs several channels allowing various devices to
● Join
● Accept, and
● Transfer information (over the network).
As it is wireless wave-based connectivity.
There are also a few channels that are best for every frequency range. You can improve the stability of the Wi-Fi connectivity. It is done by enabling the router to join mainly these channels.

To modify the channels on the Wi-Fi connection, follow these steps:
1. In the URL box of your computer, enter 192.168.1.1.
2. Use your login details to access the router admin tool.
3. Select Wireless from the dropdown menu.
4. When users own a double or tri-band router, you’ll have to set up each channel separately.
a) Channels one, six, and eleven are the strongest 2.4GHz channels.
b) It relies on several gadgets linked to the network at 5GHz. Choose 80MHz when you have a considerable amount of people. However, just a single router, yet 40MHz, when you have many routers and a lot of gadgets.
5) Modifications should be saved.

Step 6: Change the frequency band to 5GHz

Several channels are available in dual and tri-band routers. This allows several gadgets to link to a single router.

One can modify the router’s channel by accessing the router’s admin tools if users possess one.

To alter Wi-Fi channels, follow these steps:

1. In the URL box of your computer, enter 192.168.1.1.
2. Use your login details to access the router admin tool.
3. Select Wireless from the dropdown menu.
4. Alter the existing band to one of the other bands. But don’t set it to Auto.
5. Modifications should be saved.
6.Log out of the administration site.
7. Reset the router if necessary.
When the device starts again, link it to a Wi-Fi connection to check if the problem persists.

Step 7: Restart your device.

However, when your smartphone cannot link with the Wi-Fi router, your device may be the problem—try resetting your smartphone to see if that helps.
● Push the power button on the device’s side for a few seconds.
● Look for a box to appear. It should include power choices such as turning off or restarting the smartphone.
● Select the restart button if one is available.
● If it is not there, press the power option and wait for the smartphone to shut down fully.
● To switch the device back, pause a couple of seconds before hitting and pushing the power switch.
When the device starts again, link it to a Wi-Fi connection to check if the problem persists.

Step 8: Turn off the Smart Network Switching feature.

A Smart Network switch could cause this warning notice. This function allows your phone to move from an unreliable WIFI connection to mobile data. The disadvantage of this function is that it does not detach you from the Wi-Fi connection.

Even utilizing mobile data, users have an active Wi-Fi network. Moreover, it could trigger the ready-to-connect when quality improves the error message Smart Network switch could cause this warning notice. The issue will go away if users deactivate this function on their smartphones.

To do so, apply the steps below:
1. Look for the “Settings” option in the app drawer.
2. In the dropdown box, select “Network, and the Internet.”
3. Select the WIFI icon from the following screen. Then you will notice “More” or “Three Dots” at the upper right of the screen.
4. A drop-down menu will display next to you; select the Smart Network switch option.
5. A dialogue bar would appear. It will give a brief description of how Smart Network Switch performs. Moreover, it will provide two choices: ON and OFF. When you choose the OFF button, the screen will close immediately
6. Verify to see if the issue is still present.

What If You’re Using A Public Wi-Fi Connection And Get The Defect?

Since using a public network’s administrator controls is impossible, your options for solving a problem with a public Wi-Fi hotspot are limited.

One must first log in to a website before connecting to public Wi-Fi. Ensure that the information you provide at the site is valid and that it reflects your device.

The network will not join if you submit inaccurate information. There would be a difference between what you provided and how the network perceives it.

When one hotspot fails to meet your needs, the simplest option is to move on to the second closest one. The problem of locating a new hotspot is vastly decreased as most hotspot services have maps that are available online.

This allows you to identify a hotspot close to you. But you won’t be able to do anything else because you won’t be able to reach the admin options for public hotspots.

What causes the ready-to-connect when network quality improves error message on Android?

Whenever the phone believes the network, it is attempting to link to does not have a good connection. Then, it would display the message “Ready to Connect when Network Quality Improves.” Start the smartphone again to resolve this issue. However, if that doesn’t work, start the router again.

FAQ

Final Talk

As a result, the internet has been a basic requirement. Everyone on the planet uses it for entertainment or to explore crucial data. Sometimes users cannot access Wi-Fi using their smartphones. Switch on the hotspot option on your device to see if the problem is with your device rather than the router. Then, link your mobile with the SIM disabled to the same Wi-Fi connection to check if the problem persists.