If you have a Dish network and having a problem with the volume key. Don’t worry! You are not alone. Many people have faced this problem. There could be multiple reasons behind it.
Not necessarily a technical fault. Sometimes, it is just a low battery. Check what is the battery level. If it looks fine, move to the next thing, which is restarting the device. It’ll fix your problem of no volume. Learn about the troubleshooting steps to fix the dish network remote volume not working.
How To Fix Dish Network Remote Volume Not Working:
So, there are steps to guide you through fixing the volume of the Dish remote. Follow them one by one to solve the problem.
1. Restart The Receiver
To restart the receiver, you need to long-press the ‘reset’ button on your remote. Keep that holding for about 10 seconds. Wait till the system goes off. This will start the restarting process, and your device will go for rebooting.
2. Reprogram The Remote To The TV
When your system turns back on after rebooting, start reprogramming it. For that, go to ‘devices’ first and click on ‘TV’ from the options. Then click on ‘TV Pairing Wizard.’
Now select the brand of your TV, whether it is LG or Panasonic. Once you do that, you’ll be taken to the pairing guide. You will get a bunch of codes. Try each of them until you find the right one.
3. Check If It Is Set To Control The Tv’s Volume
The final is to check the remote’s settings. To do so, press the ‘home’ key on your remote. Then choose ‘settings’ from it. Then click on ‘remote control’ and then ‘customizations’ under that.
Now look for ‘volume & mute buttons’ and check if it is enabled to ‘control the TV’s volume.’ This will fix your issue of volume not functioning. Try testing it after restarting the receiver. If it still doesn’t work.
How Do I Program My DISH Remote To Control My TV?
There are two different procedures you’ll use to program your DISH remote. It will depend upon the TV model you have.
First is the models, including 40.0, 42.0, and more. These are the latest models. Whereas there is a different procedure for models older that the 20th series.
New versions
- Press the ‘home’ button: The first step is to press the ‘home’ button twice. Press the’ menu’ button if your remote doesn’t have the ‘home’ button.
- Select ‘settings’ then ‘remote control’: Now go to ‘settings’ from the options available. Next, you need to choose the ‘remote control’ option.
- Select ‘Pairing Wizard’ & the TV brand: Choose ‘TV pairing Wizard’ and then select the brand of your TV. You’ll get guided instructions for programming.
- Enter code: From the codes appearing on the screen, try testing each one. Then finish it off. This will complete the process of programming the remote. Now let’s look at the process of doing the same for older brands.
Old versions
- Set aim: Keep the remote’s aim towards the device you want to program.
- Press the device name button
- Take the remote and press the button similar to the device aimed for programming. Keep it holding for about 10 seconds. This will turn the mode buttons to light up. When it does, release the button. Now the lights will start blinking.
- Press the power button: Now click on the power button once. This should turn the blinking lights into solid ones.
- Choose code: From the options available for different codes, choose the right one. When you get one, the device will turn off.
- Press #: This will save all the changes made until now. The same will be indicated through the mode buttons blinking several times.
- Test: Now test the remote on that set device by performing some functions. If it does, that means the programming was successful.
Final Talk
Now you are well versed in programming the dish TV remote. It is done by following some basic instructions. The whole process is all about 10-15 minutes of your time.
So, follow the steps above next time you have issues with the Dish TV remote. It does not involve any technicality. So, you don’t have to call any technician. If the problem remains, you can call for technical help.
Leave a Reply