My parents made the switch to DirecTV and were proud of their new procession. They enjoyed watching the different programs and TV shows together. However, once in a while, they do face some problems with the proper ways to connect it to the wireless network. I’m sure you, too, are reading this post because you have a kind of problem.
When you are planning not to use the connection kit for your installation, and want to opt for a direct internet connection, then this is the right post. Today, I will be showing how you can connect DirecTV to Wi-Fi without a connection kit.
Moreover, you will be learning how you can avoid using the additional devices inside your home setup. Here is how you can do it effortlessly.
How To Connect Directv To Wifi Without Connection Kit?
Quick Navigation
If you’ve recently moved to DIRECTV, you might be wondering how to connect it to your wifi network properly. Fortunately, we are here to give you all of the answers you require!
You’ve come to the correct site if you don’t want to use the connection kit and want to know how to get a direct internet connection.
Today, we’ll show you how to connect your DIRECTV receiver to the network without using the connection kit.
Connecting DIRECTV to Wi-Fi in a Few Easy Steps
1.Use an Ethernet Cable
Many individuals choose to connect their gadgets through a hardwired connection that makes sense, given most people believe this one is steadier and sends out a stronger signal. An Ethernet cable is required for this sort of connection.
Before you connect it to your devices, make sure it’s in good working order. If you have an older Ethernet cable, it is possible that it has become damaged or is no longer usable.
Older cables, as well as those in bad condition, will be unable to maintain a secure connection. That’s why, especially when attaching something you’ll use for a long time, like DIRECTV, you should always use a newer cord.
Step 1: Simply put one end of the Ethernet cable into the receiver and the other end into the router to link DIRECTV to Wi-Fi using an Ethernet connection.
Step 2: Wait for the network to develop for a few minutes.
Step 3: A notification should appear on the screen stating that the recipient now has a Wi-Fi signal.
Pairing DIRECTV to Wi-Fi through Ethernet Cable Might Cause some Problems
- There’s a potential, just like with any other form of connection that you’ll run into some problems while attempting to set it up. Fortunately, the majority of the issues may be resolved in a few easy actions.
- The first step in troubleshooting will be to double-check that everything is connected properly. Inspect both sides of the table to ensure that they are connected to the correct ports. It’s time for us to proceed to the internal connection if the exterior one is working well.
- Many connection issues can be resolved by restarting the network settings on your receiver. By navigating to the menu and selecting the Internet Setup option, you may reset the settings. After that, go to Advanced Setup and select Wired Setup from the menu.
DIRECTV should now begin verifying the condition of the connection. The transmitter will be properly connected to the internet once this operation is completed.
Choose a Wi-Fi connection instead of a wired one.
Wirelessly Connecting DIRECTV to Wi-Fi: Potential Issues
- The majority of issues with linking DIRECTV to the network wirelessly are caused by incorrectly configured internet settings or a malfunctioning receiver. That’s why, if you have a problem with your connection, you should follow the procedures we’re about to show you.
- This procedure’s main goal is to reconfigure the network settings. As a result, your DIRECTV will be able to link to your network. You may turn the device on and go to the Settings menu to find the Internet Setup option. Then, among the choices, locate Advanced Setup and select Reset Network. The DIRECTV device will display a message stating that it is in the process of being reset. You’ll have to wait for a few minutes for it to end.
- When the device indicates that the procedure is finished, go to the Menu and select the Internet Setup option. Then, when the device asks if your connection is functional, click Reconnect Internet and select “YES.” After that, you’ll receive a notice regarding the wireless network settings on your router.
- The option to Configure Wireless should be selected. After that, the device will begin looking for available networks. After you’ve seen the full list of wireless networks, you may pick your favorite. To create a connection, repeat the procedures listed above.
- The third and last way to access your device to Wi-Fi is the Broadband DECA. This form of link is uncommon, and most experts advise against it. If the previous two procedures prove ineffective for you for any purpose, you can try this one.
- The broadband DECA adapter’s main function is to link your Wi-Fi network to your DIRECTV satellite receiver. When you have multi-room viewing options enabled, it’s a terrific method to link these two.
- To use the Broadband DECA to pair your DIRECTV to the internet, locate the RG-6 cable from your DIRECTV satellite antenna and connect it to the socket on the DECA adapter that says Antenna below or above it. Then, with the second coaxial wire, connect the first end to the DIRECTV receiver’s Antenna connector and the second end to the DECA device’s Line Out port. After that, connect one end of the Ethernet wire to the router. The other will be placed in the DECA unit. Your DIRECTV should now be connected to the internet properly.
Using a Hardwired Connection to Connect DIRECTV to Wi-Fi
If you don’t have access to a wireless network, you can use a hardwired connection. Connect one end of your network adapter to the receiver and the other to your modem to do this.
After some time has passed, a notification on the screen will display stating that you are now hooked up to the internet.If the connection isn’t working, try resetting the network settings.
To accomplish this, Select Menu > Internet Setup > Advanced Setup > Wired Setup from the drop-down menu.Your gadget will now verify the status of the connection.You’ll now have a hardwired connection for your DIRECTV.
FAQ
Why wont my DIRECTV connect to wireless?
Wireless Troubleshooting: Reset your modem if your receiver is already connected to the internet but you’re having problems. In some cases, you may need to reset the receiver’s settings: Reset Network may be found under Menu>Settings & Help>Settings>Internet Setup>Advanced Setting>Reset Network.
Does my DIRECTV receiver need to be connected to the internet?
DirecTV equipment may be used without an internet connection.
Can I use a USB Wi-Fi adapter on my TV?
You may also use a wireless network connection to link your TV to the Internet, which is a built-in function on many recent TV models. There is another alternative if your new TV does not have wired or wireless connectivity. Wireless networking is also available on many televisions through an optional wireless USB adaptor.
What is the DIRECTV Connection Kit?
What is the DIRECTV Connection Kit, and how does it work? The DIRECTV Cinema Connection Kit (CCK) is a piece of hardware that connects your DIRECTV to the internet. It is available in both wired and wireless versions, with the wireless version being known as CCK and the wired version as DECA BB (Directv Ethernet Coax Adapter-Broadband).
Why Do You Need the Connection Kit?
By permitting a straightforward installation utilizing your wireless network, the Connection Kit eliminates the necessity for hardwiring your network connection throughout your house.
Final Talk
You may connect your internet cable straight to the HR 34 Genie DVR; however, this may cause it to stop working in one area. The Genie DVR, on the other hand, does not need a different box of connection kits because the connecting kit is already built-in. In the case of the HR 44 Genie DVR, there is a built-in Wi-Fi arrangement that makes internet sharing a breeze. Because it is cable-free, you may connect all of the receivers wirelessly using
Leave a Reply