Imagine spending on a well-equipped security camera to rely on it for safety. But, when you check the footage, there is no video on your Security Cameras. Of course, losing the video recordings may happen with any camera. These problems come up quite frequently and have nothing to worry about. This article will solve the issue and let you know about the causes and prevention of video loss in security cameras. So read further and get it fixed as soon as possible following the instruction given.
Reasons For Video Loss In Security Cameras
The problems of video loss can be frustrating as it defeats the whole purpose of having a CCTV. The causes are few, but many people experience it. It can be insufficient energy or a fundamental wiring problem. Why invest in cameras if they don’t record?
Faulty hardware, software, or network issues can cause video loss in security cameras. To prevent all these problems, you will have to know the root causes. Let us have a look into all these reasons in this section.
1. Power Supply
We know inadequate power supply creates issues for our appliances. The same is the case for these cameras. The insufficient power supply is one of the root causes of video loss. Be it lost cable connection or burnt-out cable. Be it a damaged cable or a faulty one. All of these reasons are responsible for the video loss in your camera.
In addition, the insufficient power supply can be because of one of the reasons:
- The defective Power supply unit (maybe ten years old or more)
- defective power adapter
- Loose connectors or connections
- defective PoE Switch
- Wrong and inadequate PoE switch
- Placement not as per the specifications
- One cable and many cameras
- Faulty Cables
2. Pairing And Compatibility
A camera with HD quality and Dvr with analog. Will it work? No, right? This equipment should be compatible with other kits you want to use. One type of camera comes with a limited number of items to fix and run it successfully. This reason is why the video loss issue raises. For Example, The number of pixels should be the same on the camera and Dvr.
3. Faulty Camera
The appliances are on the checklist next. It was not the power supply, and pairing was appropriate too. This observation means It was the camera that was causing a problem. The problem can be when the camera is not recording anything the whole day. It also can be only at night, which means the Infrared Radiation is out of order. Check when the problem is occurring to get to the result.
4. Interruptions And Spikes
The same rule of your computer applies here. But, again, imagine sudden power loss and the computer shutting down immediately. Your computer’s work stops, and you start from the beginning. All you can see is a black screen. The cameras are also using the exact mechanism. It happens more often if lightning strikes and your camera are on the metal pole. The power outages can also hinder the process as the function stops. The electric current from nearby appliances can also cause hindrance.
5. Weak Internet
If you have your cameras in place using a wifi connection, This may cause your video loss. Wondering How? The link should be intact, with no barriers between the camera and router. The problem comes when the distance is more than the max limit. Then, a weak signal or a connection hindrance can cause the screen to go black.
6. Older Accessories
The older versions of cameras can also blackout the screen occasionally. Therefore, the security solutions need constant upgrades to prevent them from working inefficiently.
A fundamental yet crucial part of your security system is the wiring part. The wires are to be intact in all conditions without fail. One faulty wire can cause numerous devices to stop working. The stopped machine shows no video but a black screen.
8. IP Address Problem
Two IP cameras cannot be on the same IP address. So they start pushing the other one out, which causes video loss. There should be a unique IP address for each device.
How To Prevent Video Loss?
This section of the article will guide you on preventing the reasons from occurring. Let us talk about each one of them.
1. Preventing insufficient Power Supply
The power supply inadequacies are pretty widespread in affecting the appliances around. These problems are relatively frequent and can be resolved quickly. You have power connections, splitter, and cable wires installed at your house. Ensure maintaining a check on these things regularly.
The Dvrs you have empowering the cameras should work correctly. Ensure fully charging the batteries, and if you have a wired connection, the wires are short. Connect the IP cameras to the NVR port. If the sunlight empowers your device, ensure nothing blocks the rays and your device. We suggest making a reminder to check all these pieces of equipment to prevent video loss.
2. Pairing And Compatibility
The prevention of video loss will need all equipment to be compatible with each other. Accessories, Apps, and all such things should pair with each other without a problem. This compatibility is why people consider one brand for all these items. It ensures that the accessories will work with each other, causing no loss in the video.
3. Fixation Of Faulty Camera
The problem is known now; the time is to fix it and prevent it. But, first, quickly check for wires connecting cameras and if the connection is intact. Then, go ahead and have a look at the Infrared Settings. These settings in Dvr will tell you whether IR is not on. If it is off, switch it on and check again if it has started working. If not, the camera device is faulty, and time to replace it. Finally, contact the vendor or get a technician to solve a problem as you require expert help. If your IR LED is not working, use floodlights to check.
4. Preventing Interruptions
Like you always use UPS for surges, use one for these cameras. In addition, there are lightning protectors in the market that prevents video losses. We also advise you to use a non-metallic or wooden surface to mount your camera. If the surface choice can be metallic only, use a wooden block. This suggestion will control your time and capital wastage.
5. Preventing The Connection Issues
There are two possible ways to prevent them from happening. First, one can use a wifi extender to ensure that the signals reach the destination. Then, reducing the gap between wifi router and camera with no or less physical barriers. One can use one of these methods according to the architecture and placement. Of course, you can go for both of these options as well.
6. New Hardware and Firm-wares
To upgrade, contact the company from which you bought the CCTV. Ask locals about the facilities and rates that apply. Then, switch to the newer version and prevent video losses.
7. Wire Prevention
If nothing is wrong with the above reasons, ensure those wirings are intact. Next, check for bent or twisted wires. Then, you have a quick check around the house and ports that use wire. Finally, resolve it yourself if any fault is there, or take professional help.
8. IP Issue Resolution
The duplicated IP address is causing the video loss. Scan the IP address for these cameras. Pinging an IP address is a good option. Do this before assigning the cameras to IP addresses. The getaway should be proper to prevent these problems.
How To Fix It?
The fixes for the video loss are many. It depends on what the problem is. However, we have listed the quick fixes for you in this section. Ensure these pointers are maintained and prevent the loss of videos completely. The fixes are :
- Ensure using power surge protectors
- Ensure using Lightning protectors
- Boost up the wifi. Use wifi extender
- Enable the Infrared Radiation vision
- Add Infrared Radiation illuminators
- Using of cables should be new
- Keep a check on cable connections
- Update & Upgrade Firmware
- Check the power supply
- Use accessories of the same brand
- No IP address conflicts to come up.
This article gave insights into what is causing your video to stop. We also discussed how to work it out in these situations. Finally, this article discusses the best possible ways you can choose to get rid of the problem. Do not forget to call an expert if the work is not suitable for you.