How To Disconnect Security Cameras?

If the security cameras operate on batteries then remove them. If they are running on electricity then power it off. You need to detach the power source of the security camera.

If you’ll point a laser at the camera, you can make the footage blurry. The footage will show red light. The camera will be focused on that laser’s light only. So that way the camera can be made useless.

Placing a bright LED light close to the security camera can distract it. It can create a barrier between the lens and the view. This technique works when the light is extremely bright. Check the footage once to see how effective the LED is in making the camera disabled.

Covering the camera lens with a sticker can do the job. This will block the view and will make the footage useless. This can only work when one can reach the camera. If they are installed at some good height then this method won’t work. Although there are ways to reach out to that level as well. But someone is in a hurry then this is not the best option.

Camera jammers are the devices that block the signals. Hence make the camera stop working. This works only for wired security cameras. Also, this does not create any damage to the security camera.

If you know about hacking then you can go for this method. A hacker can get access to any device if he can break through it. It depends upon the security level of the camera.

Generally, wireless cameras are easy to hack. But wired cameras are not safe either. It is advisable to enable two-factor authentication when you have a wireless camera.

The easiest way to make an electric gadget stop working is to cut the wire. The device won’t function if there will be no power supply. In some settings, the wire goes through the wall to the other end.

In case, there are some loose wires, you can choose any part to chop off. One thing to keep in mind is that not all cameras are equipped with wires. For the wireless cameras, there are some other ways.

Spraying paint over the camera will blur the vision. The view will be blocked, and it will become useless. But the spray paint should be solid and works on the camera lens. Some sprays fed away after some time or meltdown easily. This means they don’t stick to the surface.

You can wrap up the camera with some solid tape. Electric tape of black or blue color will be the right pick. Again, the rule applies whether you can reach the camera or not.

Let’s get to the point of view of the burglar. He can get caught if someone would be monitoring his activities continuously. But if no one is watching and he is aware, then he can take advantage.

If the camera is easily reachable to you, then cover it with something. You can use a bag of solid color and place it over the camera. This is the easiest and simple way to hamper a security camera. This does not damage the camera. But there will be nothing to record.

If your aim is good then you can use the paintball gun. If it hits the lens of the camera, then it will cover it will paint. This can be done when the camera is placed at a high level.

Taking the chances and picking up the next thing to throw at the camera. This approach is taken when you need to take down the camera at any cost. You can aim at the camera and try to break it. This will stop the camera from working instantly.